Holt 75 H75 4 Cylinder Gas Engine from Microcosm working Scale Model early Holt Caterpillar Engine

Поделиться
HTML-код
  • Опубликовано: 22 авг 2024
  • H75 (Holt 75 Caterpillar) Engine. If interested, please use this link:
    bit.ly/3SjshjP
    If you use this link you will also help support my RUclips channel @reddrryder and the Office of Steam Forum for Model & Toy Steam Gas & Hot Air Engines.

Комментарии • 20

  • @Engineman_show
    @Engineman_show 6 месяцев назад

    Love this engine. Mine works perfectly 👌

  • @Nontox1
    @Nontox1 Год назад +1

    Very Good!My H 75 from Ebay have a lot of Problems.Ignition Fails and the Valves not correct.I use not the Original O-Ring,I buy 11.5x1mm O-Ring FKM Type,the Compression is now very good!

  • @nutsbolts7974
    @nutsbolts7974 2 года назад

    Very nice! It runs nice and sounds great.

  • @Shimba58
    @Shimba58 Год назад

    This is well built. Better than some on eBay....

    • @reddrryder
      @reddrryder  Год назад +1

      It came from eBay. All of them are from the same maker.

    • @Shimba58
      @Shimba58 Год назад

      @@reddrryder. Sorry to bother you. The cooling fan is rubbing in the cowl. I have tried adjusting the radiator but not happening. Any advice will be much appreciated.
      Regards

  • @anythingoldmechanical
    @anythingoldmechanical Год назад

    Beautiful, but as the piston rings are o rings, it will be a major operation to change them all!

    • @reddrryder
      @reddrryder  Год назад +2

      Keep them well lubricated and you won't need to change them for a long time.

    • @Shimba58
      @Shimba58 Год назад

      @@reddrryder how do we lubricat the oil rings on the piston.
      Regards

    • @dietznutz1
      @dietznutz1 16 дней назад

      ​@Shimba58 late but the crankcase is oil filled at least I think it is, I know it is on many model holt 75, as well as that they are run on a two stroke mix

  • @fifififo5918
    @fifififo5918 2 года назад

    OK. Engindiy and Stirlingkit has them for 1350 but it does make sense to pay 1600, though.

    • @reddrryder
      @reddrryder  2 года назад +1

      That is correct. You can get these for a little less. HOWEVER..... these 2 sellers are not the makers. I get them direct from Microcosm who are easier to deal with if there is a problem. I carefully inspect, lubricate, and test run each engine. In addition, many of us here in the USA prefer to buy and have shipped from the USA which is much quicker.

  • @dana4261
    @dana4261 Год назад

    Very nice. How loud is it when running?

  • @Purpleleaf22
    @Purpleleaf22 8 месяцев назад

    can you share a link for the gasoline?

    • @reddrryder
      @reddrryder  8 месяцев назад

      I don't have a link for fuel. Go to a hardware store and buy Coleman Fuel (white gas) or yard tool fuel. Then mixit 20 to 1 or 25 to 1 with Marvel Mystery Oil.

  • @BeezyKing99
    @BeezyKing99 2 года назад

    how much for a twin cylinder model?

    • @reddrryder
      @reddrryder  2 года назад

      900 USD www.ebay.com/itm/234359064483

  • @lukeprince7690
    @lukeprince7690 Год назад

    Hey you're probably not gonna see this but I'm trying to do a research search just ask him around I'm trying to get opinion our consensus at least I'm see whether I propane burning on natural gas burning steam engine Is is more environmentally friendly than a gasoline engine