Those who are saying that code is not working, let me tell you everyone, if you follow the video properly, everything is perfect. This is the best channel on RUclips.. today I myself made this project. Code is working perfectly. The functioning of the whole setup is superb, and the outstanding thing is technical support. Sir responds quickly and solves the problem. In short, this is the perfect channel found on RUclips. I request you sir make more and more project videos so it will encourage us to be creative. Avinash sir.. love you🫡 Thank you, Sir❤☺️🥰
Great model! Works really fine and smooth. Also, the level of cooperation shown by them is truly exceptional,any doubt and they would clear it themselves on a call. All in all, the purchase was worth every single penny. Would definitely recommend you.
Just add another section for wet metal or wet materials and modify the code to add that section. The inductive proximity sensor and the raindrop sensor will work as the input for the wet material section...easy
I am genuinely saying that this website have lowest prices i ever seen because i got a project then iam searching for components suddenly i got this skynet robotics then i ordered a project i am suprised i got the project conformed and they will give quick response also really i give him 5 out of 5 for this
i only have the classic arduino uno microcontroller and i don't have any additional pins can you give me a circuit diagram and code for the classic arduino?
hello! about the shaft adaptor, is that required for the servo motor? are there other alternatives for this as it is not locally found within the Philippines?
Hi..I having issues that burned out 2 of my Arduino unos while using this stepper unit... I only changed the power supply, using transformer ac to dc regulated 5v instead of batteries. What's the issues that's causing this damage?
No relation between driver voltage and Arduino burning May be u r doing wrong connection some where Use seperate power supply for driver Don't take it from Arduino
Sir, how can you connect a 6-36 volt sensor to arduino 5 volt?? Do I need some additional stuff? You didnt use any other stuff and connected it straight to the arduino. Is it the battery thats giving you extra power?
No need, it work on 5v also Because Arduino provides enough power to this sensor and works fine It is a very simple connection No stuff /booster /buck required
Could you give the proximity sensor specification or the model name sir, thats provided in your kit? Also, you did not use a resistor, will this damage the arduino?@@skynet-robotics
Bro can we use carboard or some plastic pieces instead of the PVC because the shops are not accepting. They are not accepting the wood size also. Pls figure it out fast as in 2 weeks I am having academic fair
Servo rotating? If a beep is coming from buzzer when u placing metal waste then arduino connection is ok If not then check code uploaded or not If yes then check stepper
@@skynet-robotics thanks for the response, sir! Is it okay if we don’t use alternative anymore? Or if it is really needed (im talking about shaft adaptor) what can you suggest?
@@drei7154 hello, we don't use the shaft adopter and we use a rubber band as an alternative and we put a cardboard underneath so we can glue it, hope it helps!
@@skynet-robotics😢😢😢😢 Which country are you from? Ordering from Amazon isn’t that cheap compare to yours I am seeing here. Please 🙏 can you share with me a link for wholesale suppliers? Please 🙏 I need it very urgently and we can discuss business if you are down thanks 🙏 for your swift response 😊😊😊😊 Plus I will drop a message for you on your WhatsApp if you would reply me thanks 🙏
what seems to be the problem here sir? avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xfc
Today is my order delivery date parcel has not arrived yet what should I do I have been waiting for 10 days. Now what should I do I have payment online to you
Ideal Delivery time is 3-7 days It will deliver on time Maybe it's due to a festival rush and it will be delayed 1-2 days only . Kindly wait if parcel not received you will get complete refund.
project kit at very low price
www.skynetrobotics.in/products/dry-wet-and-metal-waste-segregator-components-kit
Bhai code bhej do yrr
what Arduino app ddto use
Those who are saying that code is not working, let me tell you everyone, if you follow the video properly, everything is perfect.
This is the best channel on RUclips.. today I myself made this project.
Code is working perfectly. The functioning of the whole setup is superb, and the outstanding thing is technical support. Sir responds quickly and solves the problem.
In short, this is the perfect channel found on RUclips. I request you sir make more and more project videos so it will encourage us to be creative.
Avinash sir.. love you🫡
Thank you, Sir❤☺️🥰
Thanks for your appreciation, glad you liked it!
can you help me please what Arduino app dd you use please rply 😢
Great model! Works really fine and smooth. Also, the level of cooperation shown by them is truly exceptional,any doubt and they would clear it themselves on a call. All in all, the purchase was worth every single penny. Would definitely recommend you.
5:22 diagram
can you please make an garbage segregation and monitoring if the three waste put together?
Project is good and worth buying ❤
The stepper motor and ir sensor is not sensing
how do you ensure that the metal does not get sorted into dry waste with the usage of ir sensor and wet sensor?
Proximity sensor is thr
@@skynet-robotics so the proximity sensor is to detect the metal, what is the ir sensor used for?
thank you sir
What if metal is wet??
Yes also what is the wet waste inside a plastic or inside any dry object, will it be able to detect or not
Just add another section for wet metal or wet materials and modify the code to add that section. The inductive proximity sensor and the raindrop sensor will work as the input for the wet material section...easy
if i put dustbin full of all waste such as metal,wet, dry , it can seperate ?
I am genuinely saying that this website have lowest prices i ever seen because i got a project then iam searching for components suddenly i got this skynet robotics then i ordered a project i am suprised i got the project conformed and they will give quick response also really i give him 5 out of 5 for this
We can use any model for proximity sensor and steper motor
Use any Stepper but use metal proximity sensor
Stepper Motor is just vibrating and servo motor works only at first when we connect the battery, what could be the problem? Does it need more power?
Power issue
Charge battery
@skynet-robotics ok
sir, what voltage does your proxi have? thanks
5v
@skynet-robotics sir, on the proxi, the LED are functioning but there's no signal that sensor detects metal? what could possibly the reason?
Can you supply 5V from arduino to the 6-36VDC inductive sensor ? Im using the same proximity sensor
Sir? Can we replaced the battery into to solar panel??
Yes
Can we use moisture sensor In place of raindrop sensor
hi can i know do you ship the product worlwide ??
Lovely idea 👌
Thnx👍❤
Can i use metal touch sensor on the place of proximity sensor
@@vsv264 no
@skynet-robotics thanks
i only have the classic arduino uno microcontroller and i don't have any additional pins can you give me a circuit diagram and code for the classic arduino?
How to fix compiling problem
Error returns code is not 0
Sir, do you use NPN or PNP type for the proximity switch?
Can we connect the steeper motor from ardiuno with male jumpers
Yes use any jumper but stepper Needs driver
Can we use Arduino R3 instead of Arduino SMD
what can i do if i want to make it big? i will increase servo motor?
Must you point the waste to the proximity sensor? Can't you adjust the working range to sense from far ?
Yes you can use 10mm proximity sensor
Raindrip sensor not working, i did exactly every step u did
hello! about the shaft adaptor, is that required for the servo motor? are there other alternatives for this as it is not locally found within the Philippines?
@@marygraceriparip1120shaft adaptor is not mandatory
use any adjustments like BO motor wheel or coupling
Bro we can use soil moisture or rain sensor
Use any
Hi..I having issues that burned out 2 of my Arduino unos while using this stepper unit... I only changed the power supply, using transformer ac to dc regulated 5v instead of batteries. What's the issues that's causing this damage?
No relation between driver voltage and Arduino burning
May be u r doing wrong connection some where
Use seperate power supply for driver
Don't take it from Arduino
How will it know if the pink is metal or not ?
Can we use 9 Volts battery as a supply?
Yes
Sir, can we trust the delivery? Is it guaranteed that we will receive it? It's important to us
Of course
You will get proper tracking details.
You can message here if the parcel is not received.
Whether mblock coding cn be done for this project?
Sir i have Arduino DIP so i can use it in place of Arduino SMD ....pls sir tell me
Agr my metl,gila kachra or sukha kachra tino ko aksath dalu to kya hoga
Hello sir
can u answer to me how we can use solar based energy usage or by using solar panel and use that as energy wastage
Thank you
Which software did you do your circuit program
While giving the code to arduiono , The file which you provided in link it says "File is already in existing"
Any fixes??
Please reply sir please !!
the only working sensor is IR and it detects everything. what is the possible problem?
@@markgiomolano2801 reduce sensitivity of ir sensor
Can i use powerbank in place of battery
Yes
Power output shd be more than 5v
Thanks
Can arduino SE be the alternative for arduino uno?
If the plastic bag is wet, the raindrop sensor will recognize the same and pour it together. Do you have a way to fix it?
Ok let me think 😇
What's the size of the shaft adaptor?
Bro wt type of sensor are used to detect the small rock
hello! what type of arduino uno is used? standard? economic?
Can be done using esp 32
Sir, how can you connect a 6-36 volt sensor to arduino 5 volt?? Do I need some additional stuff? You didnt use any other stuff and connected it straight to the arduino. Is it the battery thats giving you extra power?
No need, it work on 5v also
Because Arduino provides enough power to this sensor and works fine
It is a very simple connection
No stuff /booster /buck required
Could you give the proximity sensor specification or the model name sir, thats provided in your kit? Also, you did not use a resistor, will this damage the arduino?@@skynet-robotics
@@skynet-robotics also sir is your sensor normally open/normally closed
Sir do you have a procedure/methods of this, need lang sa among research.
Stepper is not rotating with the ESP32 voltage.
What do u suggest for that sir
Use external power source 5-12
Hi sir, can I get circuit diagram and code for this project?
@skynet-robotics what if metal is wet?
Pls answer.
I have ordered the material still to be assembled
Did you recive the meterial
Yes
Bro can we use carboard or some plastic pieces instead of the PVC because the shops are not accepting.
They are not accepting the wood size also. Pls figure it out fast as in 2 weeks I am having academic fair
Yes
U can use any plastic containers
Can we do this using esp 32
sir. just asking can we just use the female pins on the board? and solder the 3 by 4 pins?. we're scared to break the board again
Yes
@skynet-robotics thank you sir
Sir the ir sensors is sensing the pipe too what can we do
Which sensor IR?
The one which is fitted above the rain drop sensor@@skynet-robotics
@@skynet-roboticscan the gap between the black and white light be the problem??
The both male and female connector give the same circuit?
Yes
I can't see where you put the shaft adaptor.
What's the problem if our proximity is sensing the metal but didn't sort in the trash?
Servo rotating?
If a beep is coming from buzzer when u placing metal waste then arduino connection is ok
If not then check code uploaded or not
If yes then check stepper
Is your arduno coded or we have to do coding?
If you want code the I will send with coding
Can we use the nema17 stepper motor for higher load. Sir please reply me
Yes
hello, the moisture sensor is not coordinating with the servo and stepper, can u simply tell what's wrong?
Adjust Sensitivity of soil sensor by rotating potentiometer
Or what's app me video
how to order internationally?(i live in ph)
sir can we use ultra sonic sensor with the same code provided instead of Proximity Sensor
No
Hello..... I need help.... It's not working... The Arduino is just blinking "L" light..... And the servo making weird sound 😕
Please help me 🙏
Are your batteries charged properly or should we charge it.
If possible charge it
hello! planning to create this invention, instead of wet, dry, metal? Can we make it biodegradable, non-biodegradable and recyclable? How?
Use conveyor belt and sensor
@skynet-robotics how?
Sir please give dimensions of the holes to be drilled (the distance between the holes) also do you give the pipes too ? (Pre assembled)
If you want complete project you can message me 9075800409
sir i have a question. is it normal for the stepper motor to get warmer??
Yes it's low cost stepper heats
Is proximity switch compulsory?
Yes
How many days it will take to delivere the order ?
2-5
Hello Can we use Ultrasonic sensor if proximity sensor not avelable.
No
yeh chalta alta hai yaa aise hii??
Kitne din me order kr ke kit ayaga
Sir, is there an alternative for stepper motor driver? And is shaft adaptor necessary?
Shaft adaptor is connector only
U can use any other alternative
No alternative for stepper driver because stepper need it
@@skynet-robotics thanks for the response, sir! Is it okay if we don’t use alternative anymore? Or if it is really needed (im talking about shaft adaptor) what can you suggest?
Sir can arudiono se be the alternative for arduino uno?
@@drei7154 hello, we don't use the shaft adopter and we use a rubber band as an alternative and we put a cardboard underneath so we can glue it, hope it helps!
How to make DC motor project
Topic?
Bro, where to use female female jumper wires and male -female jumper wires , you have not told it clearly
I will order the kit within 5 days
Sir, please reply. If we will use arduino SE, would it still work?
Yes
Can we use this experiment in engineering
Yes
Can use NEMA17 for more load?
Yes
Is shaft adaptor is neaseasery
No u can do your adjustment
does this work without using any battery?
5v Adaptor
I would love to get those kits of yours but I don’t know how easy your platform is to collect money from local currency like Nigeria 🇳🇬
Sorry international shipping Not available
You can order component from Amazon in u r county
@@skynet-robotics😢😢😢😢 Which country are you from? Ordering from Amazon isn’t that cheap compare to yours I am seeing here. Please 🙏 can you share with me a link for wholesale suppliers? Please 🙏 I need it very urgently and we can discuss business if you are down thanks 🙏 for your swift response 😊😊😊😊
Plus I will drop a message for you on your WhatsApp if you would reply me thanks 🙏
whats the size of shaft adaptor?
5mm
what seems to be the problem here sir?
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xfc
Problem with Arduino
Try to disconnect and reconnect
Otherwise replace Arduino board
@@skynet-roboticsthanks sir
Sir,what code used for nema 17 with A4998 motor driver
chepnamestepper library will be change
Hi sir why does the stepper motor don’t rotate when we try it
Send video on WhatsApp
@@skynet-robotics i dont have whatsapp sir i send you video on instagram
Have u figured it out man?
Code and libraries ki link nahi hai bhai
Sir i live in punjab state in india will it be able to get delievered there?
Yes
Today is my order delivery date parcel has not arrived yet what should I do I have been waiting for 10 days. Now what should I do I have payment online to you
Ideal Delivery time is 3-7 days
It will deliver on time
Maybe it's due to a festival rush and it will be delayed 1-2 days only .
Kindly wait
if parcel not received you will get complete refund.
Rain drop sensor and stepper motor was not working please tell me the solution for my sciences exhibition
Send photos and video on WhatsApp
Sir stepper motor driver me light glow Nahi kar rahi hai shayad isiliye stepper motor Kam Nahin kar rahi
Sir aap Ka WhatsApp number Nahi mil rahe
Mera 2 date ko regional level exhibition hai to please solution bataiye please
Helo sir
I have one doubt
In this three waste mixed and it have separately divided is it possible sir
No
@@skynet-robotics I want like that project bro
How to upload the code sir
To which board we want to do
Uno or nano
How much will it cost to prepare the same?
2-3
is this possible with arduino nano?
Yes
@@skynet-robotics can u give me the circuit board setup? if possible
Servo motor rotating continouslly what to do??
Use 180 degree
Please tell is your website safe i want to purchase