Это видео недоступно.
Сожалеем об этом.
1995 Nissan Pickup D21 Mysterious No Start Issue Resolved Easy Fix
HTML-код
- Опубликовано: 16 янв 2020
- A nagging intermittent starting issue was resolved with a starter ignition switch.
#nissantruck
#nostart
#pickuptruck
![NoCap - Maliboo [Official Music Video]](http://i.ytimg.com/vi/FUV7E0QyniU/mqdefault.jpg)
I have a 1995 Nissan XE same problem I was having. Thanks for your video. Great job!
I have a 96 2.4 L. It was doing the same thing. I thought it was the starter or a part of the starter. I just replaced my ignition starter switch. So far no starting issues. Thank you, so much for posting a solution.
Thanks for letting me know it helped.
Seem to have the same problem. Truck has been out of commission for 5 days. Really appreciate you posting this. Will post if this solves it.
Yep!! That was the issue. The hardbody is back on the road!! Thanks again for posting the video. Was a HUGE help
Thanks for the video. Been chasing a similar issue and was out of ideas. Have one on the way because it's a pretty cheap gamble.
Thanks for this video, my 92 4x4 was doing the same thing. Going to Advance Auto right now to get that part. Thanks again. That electric buzzing noise would happen aftter about 4 or 5 times of turning the key it would finally start. Thanks.
Man im haveing the same problem am glad you share this brother the only thing is my truck has a auto tran in it
Very helpful thanks for sharing 👍🏼
Good video I have a 95model it was my dad's truck - I love this little truck never had any issues with it 200thousand on it I have seen 2of these trucks with 400thousand miles on them!!!
Thanks. This one has 188K. I bought it new and it has had very few problems over the years.
Thanks for the video I’m having the same issue
Wow, thank for sharing, same problem in my 1995 nissan.
Got same no crank problem... changed the switch. Problem is the same. I may need an OEM starter. The remanufactured starters fail very quickly.
Great video!!!! Thanks for the help!
Many thanks
I had the same problem with my 1992 Nissan truck I took a wire tie tied it around the key switch and the part you replace tightly it has started every time it has 400.000 miles on it still runs great.this is my 3 Nissan truck all of them had 200.000 or more miles.
After reading your post .I was having same problem. I pressed the ignition switch and found it was loose . Tied it with a tie wrap as you did and it was solved thanks brother
thanks friend , that was my problem too
Thank you!!
I have had an issue for a while when trying to start my '93 D21. Many times , as was the case today, I push in the clutch and break, the have to jiggle the key to get it to turn over. About an hour later went to go somewhere and all the sudden I get no power to the radio, A/C, or turn signals. GeeWhiz guess to me would be the same problem you had as the symptoms all require the key to be turned to the ON position. Please let me know if this is similar to you issue or if you can guide me in t right direction. JT
I had to replace the ignition switch on my 1994 D21. It worked, but did not solve the problem. I still had to tap the cylinder lock hard to get it to start. Figured out that it was the key was so worn out, and the innards of the cylinder lock had enough after 187,000 miles. I have a new cylinder lock assembly, looks like I will have to drill those rivets out to put on the new one. Any suggestions?
Makes sense brother but when mine does it it acts like it starts turning over really slow like the battery is weak. And some times i have to tap on the starter and have someone turn it over and she starts right up i had the starter checked and its almost two years old but they said the starter was fine and my battery is almost new so am glad you shared this brother and like i said my truck is identical like yours but mine has automatic in it and let me tell you i wouldn't get rid of it for nothing she has been a really good truck until this little problem 25 year's and this is the only thing that has been a problem that's pretty good but anyway thanks man
friend how did you solve that problem
Any chance anybody know what each color wire does so I can hookup an aftermarket ignition to mine?
I am having same issues could you trouble shoot by jumping wires on back
Wow thanks I will try it
Yes i did, work's, 100%
I have a '97 nissan pu xtra cab, 2.4L automatic, 245K miles and runs great. I also have a 2011 Honda Accord EX, lo miles, my daily driver now. I drive the truck on weekends and when I go fishing, ect. The truck has a new battery, few days ago it started real slow. I thought it was odd, drove it to the store. When I left, it turned over a little slow again but made it home no problem. Got home and tried to start it and it 'won't start'. Checked the battery and it has 12.75 voltage, which I've checked a few mornings now, same voltage, lights, radio all work, not the battery. I do hear a very slight quiet click sound just for half a second when I turn the key on where I think the starter is, I assume it's the starter. I guess I need a new starter..Any other ideas??..Thanks
I have a question that I can't seem to find an answer too? I want to replace my entire ignition switch as they are very inexpensive. there are 2 wires going into bottom of switch and no one seems to know what they are for or how to remove the connector from old switch. 1995 D21 4 cyl 5 speed man shift???????
I think I have the same problem but I can't figure out what did you mean with the "buzzing niose". When I turn the key the engine will either start normally or it will sound like the starter runs a bit by itself, no engaged with the engine (with a small "kick" when it stops). I was thinking that the gears of the starter are failing.
The buzzing noise is a bad electrical connection.
Fíjate que tengo un problema con los cables de bujías de escape, tengo una Nissan z24 8 bujias ,.pasa lo siguiente,
Al ir andando se me apaga la camioneta la enciendo nuevamente y prende al ir andando, después presenta unos jaloneos al acelerar, me di cuenta que los cables de bujías se están tronando del lado de la bujia, y van 4 veces que cambio los cables de diferente cilindros no sé si sea problema de la bobina o del distribuidor, o alternador,espero me puedas ayudar , saludos cordiales
Tell me can I try any switch fit from other years
is this common in these trucks
This for a crank no start or a no crank situation ?
Like my dad has a 1990 Nissan pickup d21 and his starter overheats for no reason like if u turn it on and off multiple times it just wont start
help me to nissan picup not starte
Hi Gearhead. I have a 93 D21 Nissan, it has been sitting for 10 years and every 6 months I start it up and let it run
about 20 minuets. It's a great truck, I have kept it in good condition, but now it cranks over but will not start. I can't find or check the transmission fuel, oil is good, could it be the fuel pump? fuses? spark plugs? Dash lights come on, heater works. Any suggestions would be great. Thanks
I had the same thing happen about 3 years ago and it was the fuel pump. I would start there.
@@Gearhead.327 Thanks, I was hoping not because thats a huge job I don't want to do myself. How much do you think it will cost me to have someone repair it?
@@terryanning7138 It is really not that bad of a job if you cut the bed out right above where the fuel pump is. That's what I did and it made it easy. As far as what someone would charge, I would call a couple of mechanics and you will get a good idea.
I had fixed up my 92 4x4 2.4L and then the alternater pulley was going bad so I got a new car and it set for 3 years now I have replaced the master and slave cylinder and put new alternator in new battery and it will not turn I hit the starter with a hammer and 1 time I heard it sound like it was going to turn so know I am about to replace the starter. I just hope there is no short.
What’s in that black cylinder that was by your hand while you had the wires
If you are at the 44 sec, it looks like a spacer for the hood.
Nice.
My dad is having an issue that when cold it turns right on but once it gets to normal working temperature and you cut the engine off. It won't start. The engine has a hart time turning over.
But when the truck cools off, it will start right up.
The whole starter was replaced and still same issue?
Same issue here. Was it the ignition switch?
Same starts in the morning cold start then turn it off when it's kinda warm to check it and sure enough doesn't turn on again
Sounds like fuel regulator?
Fuel pump
I put screwdriver into that plastic insert that receives the ignition switch to keep part..... When everything broke the plastic fragmented and I had to go buy a new one. Just a heads up y'all
What was it doing. Not starting at all. Or was it trying to turn over and then dies off right after?
It would make a buzzing sound and would not turn over at all.
What if it turns over then stops
Same problem
On Wednesday I was driving and I saw one of the boys so I flickered my highlights and then all of a sudden I could gas my truck to accelerate, but my battery was still going I just couldn’t gas. Then I pulled over onto the side and then I couldn’t start my truck at all and still to this day I cannot
Check to see if its getting fuel
I have a d21 93 pickup. I turn the key and absolutely no sound. None. Its silent. I'm about to take my starter out in a bit. It actually may be my ignition switch.
Do you remember what it was. I’m having that issue now. I’d appreciate it if you got back to me
@@liftedvibrations9163 turns out it was my starter. It was weird, but I learned the hard way lol. If you can, take it out and have it tested. Hope u get it going man.
Idk I replaced the starter 2 years ago when I bout it. Do you think it would give out that fast?
@@liftedvibrations9163 it could. My stock one lasted like 12 years. The one I just replaced was in around 3-4 years. So it's possible.
The same problem
What engine is that?
3.0 V6.
Como quitar el tablero
hi greetings, 1 week ago I lost my key to a 1996 Nissan
What would be the best option for me :(
@@miguelangellopez4250 Pop-A-Lock. It aint going to be cheap, but it is the easiest option for you. About ($80 or so $$$)
You could get a new ignition with the key from eBay cheap,,,,,,,,BUT,,,,,,,,, then your new key won't work on the doors.
Pop-A-Lock can cut a new key that will fit your factory locks and ignition. I would have a extra made as soon as they are done. I keep my extra key in my wallet.
Cuanto mide de largo
When that doesn't work whats next. We have an automatic TIA
Check your neutal safety switch on your transmission.
@@Gearhead.327what if that’s not it
@@youngj3937 I would check battery cables and make sure negative connections at the frame and engine are good.
You just showed everyone how to steal a Hardbody...
First thing is no one wants my old truck and #2 it is theft proof from millennials because it has a manual trans! lol
@@Gearhead.327 Millenials are older than you think, I've driven nothing but Manuals, I think you're thinking of "Zoomers" or Gen-Z