MKe sure the family time gets in there too bud! I’m sure your one hell of a father and husband. When the family time is good, the diesel time is even better!!! Love the content man!! Keep it up!!
That was awesome! "That's it?" Hilarious, reminds me of the first trip I took my now wife on in my mud jeep. She was like "Are we going mudding or what?!" With that I put the hammer down and ripped through the deepest hole out there. 13 years later we are still together and working to balance life between vacation time with family and mud/diesel truck addictions. Looking forward to seeing the tear down of the 07 engine. I'm excited to see the new build for it, you're going with a 6.7 right?
I loved the new PDD video where Will swapped all the parts on the 12V just let the camera roll. Make a 45 minute tear down video and show us EVERYTHING.! Of course if it’s not too late and you already tore it down
@@horsetorquesdiesel you know the wife was saying you guys don’t spend enough time together, she’d make a great camera person Ha Hah Hah Hah Hah Hah Hah
Isn't Myer getting that motor? We need a Myer reaction. Wonder if that'll be the same as your wives reaction? Looking forward to the tear down, and the new build.
I know it's a year down the road but it still a great video i still think you wife was really surprised 🙂 ( i will never understand RUclips showing videos a year later ) take care love you guys 🙋♂️ 🇬🇧
I'll second blanie's comment!! Lucky man indeed. I have a small airplane and my wife supports me as long as we make it to a Florida beach occasionally!!
Your wife is a neat lady you’re a lucky guy to have a good gal like her good luck on your engine I hope the blocks not totaled remember there’s no more of those we got to start being careful with them try to make them last all right guy good luck you do a good job on your truck I’m just curious what brand tires were sitting by the door there I like that tread design it’s a six in a row jim saying have a nice evening I just star we just put a hungry diesel fuel pen and 3800 RPM governor spring and 8 inch timing spacer on my V pump my 91.5 dodge seems like it helped out quite a bit anyhow I’ll have a nice day bye
Your wife is looking for more power; this truck doesn't phase her. Anyway, how do your prevent freeze plugs from "blowing out"? An "o-ringed head" should be very resistant to head gasket failure. Great analysis about the aftermath. Thank You.
She's a keeper Josh!! I've been fighting my 4th gen with battery/low voltage/weak ground or somethin type horseshit, anyway a set of batteries later and she about flipped "that blankin thing is brand new, why the blank is it needing batteries now?" Well I couldn't agree more, I don't want to be working on a 3 year old pickup either but...........they don't build anything to last anymore. Probably best I don't have any "forced upgrades" issues going on or you'd be down a subscriber Josh lmfao
@@horsetorquesdiesel happy wife happy life! Haha take her to bora bora i know you both would enjoy the crystal clear waters! Or we also have some nice propertys much closer in palm springs dare i say comifornia! Haha with slides for the kiddos an extra money for bigger snails
My wife tells me that all the time “We need to spend more time together “. What’s the saying happy wife happy life! 😂. How hard is it to install a manual valve body? Do you recommend them in a pretty much stock engine? I have a built trans by PDD if that even matters. Thanks Adrian
Looks like fun. Got an 03 with a 6.7 Block with 5.9 head 60% overs, s366sxe and a cheetah ratchet shifter which i hate lol. Im wondering with that TCI shifter is that push button lockup and od? I have toggle switches that mounted down lower which is a pita when shifting. Hate having to move my hand down to toggle them
Did he seriously say " its runs to good to have a hole in block"?!! Ummm u have blow by coming from the oil fill. Where does blow by come from? I will let u think on it and get back to me.
Lucky man, a woman that supports your passion, but she is right got to get in that family time.
Oh for sure!
Wished my wife was into trucks and cars. I would be stupid 🤪
My wife has never seen me race.... hell she probably don't even know what number is on the side of my car
You deserve more subscribers than you have, you actually take the time to put out some videos
It’ll grew, I’m enjoying making the content for y’all!
I like how your wife said something like “that’s it?” Hahaha that means you need mo’ powah baybeh haha
He could of probably launched at like 30psi
😂🤣😂‼️.....Yea she Needed more Jerk in her Belly‼️
Yeah by a Ford
“Is that it?” Aka time for more truck parts. 😂😂
Powerful wrench workz sweater!!
Pretty cool man two of my favorite channels ,lots of great how to's
MKe sure the family time gets in there too bud!
I’m sure your one hell of a father and husband.
When the family time is good, the diesel time is even better!!!
Love the content man!! Keep it up!!
I've watched this video a bunch of times. Josh is one of the best. ..."what the he'll do you mean is that it" had me rollin.
Awesome content! Been debating on thread in freeze plugs for a while and this sealed the deal lol. Keep up the great work 💪
Would recommend for sure kicking myself for skipping it
The feeling you must have to have a wife that supports your passion! Mine just tells me stop talking about trucks and help her clean house 🫡
“Was that it” 😭 that must’ve hurt
Not the first time I’ve heard that 😂
@@horsetorquesdiesel hahahahahhaha
That was awesome! "That's it?" Hilarious, reminds me of the first trip I took my now wife on in my mud jeep. She was like "Are we going mudding or what?!" With that I put the hammer down and ripped through the deepest hole out there. 13 years later we are still together and working to balance life between vacation time with family and mud/diesel truck addictions. Looking forward to seeing the tear down of the 07 engine. I'm excited to see the new build for it, you're going with a 6.7 right?
How nice is it to be able to just build a motor, no worries at all. Just like,”oh need to build a new one”. Love your channel btw
I loved the new PDD video where Will swapped all the parts on the 12V just let the camera roll. Make a 45 minute tear down video and show us EVERYTHING.! Of course if it’s not too late and you already tore it down
Honestly it’s hard to do that without a full time camera guy. I’ll do my best! It’s still in the truck
@@horsetorquesdiesel you know the wife was saying you guys don’t spend enough time together, she’d make a great camera person Ha Hah Hah Hah Hah Hah Hah
When you gotta get a 3rd truck because your “daily” got outta hand
Looking forward for the teardown video 👍👍
We will get it!
Isn't Myer getting that motor? We need a Myer reaction. Wonder if that'll be the same as your wives reaction?
Looking forward to the tear down, and the new build.
It runs fine just some oil in the coolant
Only a little broke
@@horsetorquesdiesel good for a few more pulls
Gotta tap and plug those damn freeze plugs. Wicked truck tho.
happy wife = happy life
I know it's a year down the road but it still a great video i still think you wife was really surprised 🙂
( i will never understand RUclips showing videos a year later ) take care love you guys 🙋♂️ 🇬🇧
I'll second blanie's comment!! Lucky man indeed. I have a small airplane and my wife supports me as long as we make it to a Florida beach occasionally!!
Huge shoutout From the parts house🎉🎉🎉
She was scared! Lol. Great content, keep it going!
Nice work on this bro! Don’t let the negative comments plague you down. Good content overall!
1300 HP is cute. My generator has that at idle
Was that it ?! Hahaha your wife is cool 😎🤘🏻🤣
What a great video !
Greetings from France to you 2
Damn Horsetorques worldwide!!!
@@horsetorquesdiesel yes sir !! 🤘🏻
You 2 are so Damn Cute together !! Keep spoiling her because she is what makes your face smile !!
She's a trooper! But since the truck broke again. So much for that trip to Bora Bora! 😂
Already almost back up and running!
@@horsetorquesdiesel awesome! Can't wait for the next video
Man josh,it did so good towing no problem, then just goes??you have more patience then mee,your wife seem real cool too!!
It happens not the end of the world
So funny , her mid sentence you shut the door on her! 🤭hilarious
Oops!
3:00 that'd be an impossible promise! lol
No kidding
Your wife is very cute you definitely snatched one up out of your league. Much respect.
Without a doubt lol
Awesome vid including the wife. Not sure if congratulations or not on the blown engine but it's always entertaining as shit!
Hahah thank you
Great Video Josh!! Hello from the Westcoast of Canada.
Thank you! Horsetorques North American wide
@@horsetorquesdiesel Your welcome Josh and your wife has a great Personality!!
@@franklogan494 she’s something alright 😂 nah I’m very lucky
@@horsetorquesdiesel Yes, you are very Blessed!!
When you send it and she says ‘was that it’ 😂😂😂
#depressed
Still trying to break the powerstroke but she refuses to die 😎
Your wife is a neat lady you’re a lucky guy to have a good gal like her good luck on your engine I hope the blocks not totaled remember there’s no more of those we got to start being careful with them try to make them last all right guy good luck you do a good job on your truck I’m just curious what brand tires were sitting by the door there I like that tread design it’s a six in a row jim saying have a nice evening I just star we just put a hungry diesel fuel pen and 3800 RPM governor spring and 8 inch timing spacer on my V pump my 91.5 dodge seems like it helped out quite a bit anyhow I’ll have a nice day bye
Convenient that it appears you and Meyer shop in same complex as PDD
Your wife is looking for more power; this truck doesn't phase her. Anyway, how do your prevent freeze plugs from "blowing out"? An "o-ringed head" should be very resistant to head gasket failure. Great analysis about the aftermath. Thank You.
Thread in freeze plugs prevent it
She's a keeper Josh!! I've been fighting my 4th gen with battery/low voltage/weak ground or somethin type horseshit, anyway a set of batteries later and she about flipped "that blankin thing is brand new, why the blank is it needing batteries now?" Well I couldn't agree more, I don't want to be working on a 3 year old pickup either but...........they don't build anything to last anymore. Probably best I don't have any "forced upgrades" issues going on or you'd be down a subscriber Josh lmfao
beautiful, having a supportive partner is priceless I'm inspired
🤘🏻🇺🇲 another great video. Can't wait for the motor build. Mo powa brother!!
Always!
On my p pump truck I blew freeze plug in head. Head gasket was fine.
Was a great reaction haha. Keep em coming
Son of a B. Watching this while rolling down I-10 in west Texas and lost all boost in the Fummins. Haven’t even stopped yet to look it over.
Check for a blown boot!
@@horsetorquesdiesel Thats what I get for having two PDD boots sitting on the floorboard instead of where they belong. I’m about to stop and look.
@@horsetorquesdiesel yup, boot.
@@rubikrawler well easy fix!
@@horsetorquesdiesel Yeah. That one had been superglued on for a while. I knew it was coming. Great video today btw.
what do you do for your t case to hold the power?
It’s stock boss.
Marriott has a very nice place in Bora bora i recommend!
Sssshhhhh need truck part money
@@horsetorquesdiesel happy wife happy life! Haha take her to bora bora i know you both would enjoy the crystal clear waters! Or we also have some nice propertys much closer in palm springs dare i say comifornia! Haha with slides for the kiddos an extra money for bigger snails
Good stuff.. keep it coming.
Sometimes Fate says... Build a new engine... lol Can't wait to see it! What transmission are you running? Love Manual Valve Bodies!!
Is that it? 2 weeks later adds another turbo.
You ain’t lying
"is that it?" AHAHAHAHAHAHAA
Are you in nevada ?
🤔 i think you need more horses looked slow were i was sitting. Haha kidding like shifter setup
Sweet wrench workz hoody buddy 😉
My wife tells me that all the time “We need to spend more time together “. What’s the saying happy wife happy life! 😂. How hard is it to install a manual valve body? Do you recommend them in a pretty much stock engine? I have a built trans by PDD if that even matters. Thanks Adrian
Not hard at all. Just mounting the shifter takes a little time
Ok. I just had a question about doing valve lash. Now Will was demonstrating the 7 method now does that work for our trucks? I also have an 05. Adrian
Looks like fun. Got an 03 with a 6.7 Block with 5.9 head 60% overs, s366sxe and a cheetah ratchet shifter which i hate lol. Im wondering with that TCI shifter is that push button lockup and od? I have toggle switches that mounted down lower which is a pita when shifting. Hate having to move my hand down to toggle them
I run a b and m bandit shifter with WPE buttons
💯💯💯Great Video Dude!...I’m Now a Subscriber 💪💪💪
Awesome hope you enjoy the rest of the videos!
And this is the exact reason why the EPA wants to crack down.
How so? It was literally a private road.
Your wife seems pretty cool
She is
What good is 1300 if you have to work on it every time you drive it .
I got 10k miles out of it. I ain’t complaining.
Most people when they blow up an engine they are depressed. Lol 😂 your wife is like let me guess, another trip to ohio?
She gets it we are building this one in house
@@horsetorquesdiesel lucky man. My girl doesnt support any of my diesel hobby’s
Lowkey sounds like cleetus
When it's all said and done it's still a Dodge ! Don't mean to chap your ass but it is what it is 😆
To each their own. I chose what I chose to tow that is Rams strong suit. And I didn’t want a 2008 interior in a 2021 truck
Watch your back. The EPA is coming fir your truck.
The life of a highly modded diesel . The most unreliable vehicles on the road .
More money than brains
lol. Engine was toast regardless
Did you build the trans?
Where did you get the add on gauge pods that mount to the pillar gauges
XDP sir.
@@horsetorquesdiesel
Thanks
Was that it?!?! shots fired!! Well honey there goes my next bonus or 2 can't have none of this "was that it?!?" bullshit going on around here haha
I’ll just turn on the bottle
My wife tells me this ALLLLLLLL the time.
Typical womans response is "is that it !!!" Hahaha 😆
Great way to break your truck.
Taking it like a champ until a woman drove it.
Did he seriously say " its runs to good to have a hole in block"?!! Ummm u have blow by coming from the oil fill. Where does blow by come from? I will let u think on it and get back to me.
A blown head gasket. You ever heard a hole in the block engine run? I have it doesn’t sound like that
If you ever get mad at your girl hook a brotha up and send her my way 😆😆
0.5) I've had a few drinks. 1) I apologize. 2) - Dude, you totally married up. Just sayin.
74K views! I guess you found out we like your wife more than you 😂😂😂
She wants to do how to do a burnout video in my truck 😂
@@horsetorquesdiesel haha. Just let us know how to find the ‘tits and trucks’ only fans once you get it up and running 💀😂
Typical Dodge reliability makes tons of power and then blows up. Lol
👍
No creamer look yet so hasn't mixed well
Your wife’s hot don’t lose her
Damn, shes way to pretty for you, lol, jk , keep up the great vids!
Yep
Ya... Women want those expensive vacations don't know how to explain to my wife that vacation is money wasted! Money on the truck is many invested lol
She puts up with so much crap she deserves it!
Sucks about the engine josh!
We got spares no sweat
@@horsetorquesdiesel must be nice..haha...12 valve spares?
It actually an engine not a motor. But with the millions you spent on it I’m sure you already know this
Millions? I bet I have less than 15k in the whole thing.
🔺🔺
glad i outgrew that shit
😂
that shifter is the *douchiest* thing i've seen in a truck in quite ... a .... while .... yuck
Gotta use your wife to get over 100k views. All your other stuff has 10k lmao
Thanks for watching
@@horsetorquesdiesel great job on the views
1200 hp***
****1319hp lol