Well Mr Electricity, you did a top-notch job, whereas we live in a world of throw it away and replacing, you were able to bring new life back into a bin it society. Well done 👍
for what he has to work with, and limited resources this Guy is a true craftsman. a survivor by doing..nobody should be critical of him or His work..because i suspect He can out work most of us..and do it better...
iamrichrocker I could maybe outwork him I’m 16 and very competitive I’ve mastered a lot of craftsmanship been working on machines since I was 5 I am still do the craft work and I love it a lot haha
I can barely build a guitar from a pre-made Kit. This guy ROCKS! The thing is...he now owns and can enjoy a piece of work that 1. Nobody else has. 2. He saved/rebuilt/improved himself. That’s really cool in my opinion.
A little trick that I picked up. Instead of repainting the whole thing the marks where the paint has chiped off or scratched off just touch up with boot polish. You can match it pretty well as well. Just wipe it on then wipe of let dry then repeat a few times and it will be around 80-90% covered.
Must say I am mightly impressed by this guys work , and craftmenship , the ability to rewire transformers is a great asset , my hat goes off to you sir !
No se de que pais sea este señor, pero el hace su trabajo muy bien, aqui en mi pais (argentina) tambien hacemos lo mismo, entiendo que algunas personas se asombren con esta reparacion y digan que ellos compran nuevo, pasa señores que en su pais regalan las cosas, a nosotros nos sale muy caros, demasiado diria yo asi que no nos queda otra cosa que reparar.
the diffuser needs to be centered, the dome needs to be peeled off and an old film film installed between the magnetic pipe. After the glue has dried, remove and glue the dome back.
Да, я с вами согласен. Но после того как они поменяли нормальное но не исправное ВЧ звено на пьезо пищалку, я понел что они делают на отъеби... И даже смотреть нет смысла. И они ни когда не поймут что такое герметизация корпуса. Так как в видео я этого даже и не увидел. С уважением, Никита.
When I worked in the Hi Fi trade from the 1970s to 1980s a company called Jamo or Jano not sure of the exact name. The rep came to my shop and the speaker makers philosophy if they had one was big box lots of drive units. This matched the desires of the people who brought them. They used to come back and complain a few weeks latter when they found there Mates "Boxes" were better. The mate had probably brought decent drive units and made decent cabinets. These sound like Jamo Boxes ! There them alway :-) They might corrupt your concept of good sound.
What did you brush on foam seround to remove them. Just wondering. I watched lot of you restorations and all ways wondered what it was. Oh and thanks to you I've restored 3 pairs of speakers now. Believe it or not you inspired me to restore my first set a pair of pioneer CS-539 then CS-549. and a pair of pioneer S-H552F-K 4way speakers
You put a lot of work into these but I'm not sure if it would have been better to invest that time and money on a new pair of speakers that may have a better sound. It must have been a fun project !
Correct me if I'm wrong but you didn't have to fix the subwoofers on the side maybe clean them up but definitely not a foam replacement I mean they look perfect cause I'm guessing they had rubber surround which should have been fine
Hello sir you did a good job !!I did this also a couple years ago. Where a found some by the driftstore The trick is to find the right diameters. For the speakers To glue, you have special speaker glue .And you glued on with a brush To clamp the foam roundings to the base and the speaker . Use a 220v wire cable Lay it around the glued speaker and than put on clothespin to set.. the hard part is to center the foam rings ..They need to perfect in the middle, so the coil inside the magnet go s straight up and down in one movement My speakers are still playing by a friend
Wow 👍 Nyimak sampai selesai videonya
Good my friend thank you for video
Well Mr Electricity, you did a top-notch job, whereas we live in a world of throw it away and replacing, you were able to bring new life back into a bin it society. Well done 👍
Bác này ở Việt Nam mà giỏi ghê. Làm clip tiêu đề tiếng anh. Tiền quảng cáo bên nước ngoài cao hơn. Bác thật thông minh
Đặng Beta chuẩn ạ, bác này làm vid kém gì bọn tây về khoản phục chế đồ đâu! Ít ae VN biết quá
Ko hiểu sao em thấy rất thích những video kiểu này e rất thích điện tử luôn
Mong muốn được giao lưu học hỏi cùng các bác Zalo 0394243845
Ít ng việt quá các bác nhỉ. Toàn thấy ng nc ngoài bình luận
Tôi xem suốt mà nay mới thấy vn bình luận
Ang galing po niya. Magpawa rin sana ako ...
Làm khéo quá đi bác
for what he has to work with, and limited resources this Guy is a true craftsman. a survivor by doing..nobody should be critical of him or His work..because i suspect He can out work most of us..and do it better...
iamrichrocker I could maybe outwork him I’m 16 and very competitive I’ve mastered a lot of craftsmanship been working on machines since I was 5 I am still do the craft work and I love it a lot haha
I can barely build a guitar from a pre-made Kit. This guy ROCKS! The thing is...he now owns and can enjoy a piece of work that 1. Nobody else has. 2. He saved/rebuilt/improved himself. That’s really cool in my opinion.
You dont see this very often anymore.. everyone just trash them if the membrane is broken, but you save them and i love it!
Len Gaming every speaker will repaired in the Professional Sektion
Судя по магнитной системе, колонки полный фарш.
I'm impressed. Both by the speakers themselves, and the fixin' skilzz.
Không ngờ việt nam mình cũng có kênh phục chế đồ như thế này ^^
A little trick that I picked up. Instead of repainting the whole thing the marks where the paint has chiped off or scratched off just touch up with boot polish. You can match it pretty well as well. Just wipe it on then wipe of let dry then repeat a few times and it will be around 80-90% covered.
First Class Job. Everything should be fixed ,recycled ,repurposed.
I had no idea that those membranes can actually be replaced. Very nice!
This man is unbilievable ! Great Work
Привет из России! Хорошая работа! Я тоже люблю ремонтировать.
Must say I am mightly impressed by this guys work , and craftmenship , the ability to rewire transformers is a great asset , my hat goes off to you sir !
Me.Electricsity very good restoration 👍👍👍👍👍
No se de que pais sea este señor, pero el hace su trabajo muy bien, aqui en mi pais (argentina) tambien hacemos lo mismo, entiendo que algunas personas se asombren con esta reparacion y digan que ellos compran nuevo, pasa señores que en su pais regalan las cosas, a nosotros nos sale muy caros, demasiado diria yo asi que no nos queda otra cosa que reparar.
you are a multi talented man or should I say hero
صح كلامك كل شي يعملوو
Thank you for not adding irritating background music.
молодцы,хоть без музыки. все четко ясно..
조아요 구독 꾸욱누름니다 감사합니다 또만나요 수고하세요
Very good job and Restauración look and sound perfect thanks for the video men
the diffuser needs to be centered, the dome needs to be peeled off and an old film film installed between the magnetic pipe. After the glue has dried, remove and glue the dome back.
Việt Nam the best!!!
Que som maravilhoso 😍😍🎶🎶🎧🎙👏👏👏👏👏👏👏👏
absolutely amazing guy
amazing job on the speaker restoration they look great
Another great video..
Total Harmonic Distortion - 100%.
Your stinky ass , harmonic distortion 1000%
These actually sound really nice....
@DutchGamers these sound awful wdym
He replace a HiFi tweeter whith a piezoelectric tweeter bad idea
@@dumitracheionut7285 Read my thoughts.
This guy is mint boys. 👍
Great job Mr. E, you are indeed multi talented.
Nice worck Man Everything
Maravilhoso 😍 ficou muito lindo. PT-BR
Talento!
I love it despite what those below couch geniuses are blabbing 😂😂😂😂😂
после этой поклейки, динамики прослужат, максимум пол года! центровать надо, перед поклейкой.
так у них по ходу гарантия: за дверь и всё.
Да, я с вами согласен. Но после того как они поменяли нормальное но не исправное ВЧ звено на пьезо пищалку, я понел что они делают на отъеби... И даже смотреть нет смысла. И они ни когда не поймут что такое герметизация корпуса. Так как в видео я этого даже и не увидел. С уважением, Никита.
Top parabéns pelo trabalho
Respect to you Mr Electricity. You are a real Craftman, and you will deserve much more suscribers, and also money :)
Very nice job !
Carai,caixa de som top
That is a great sounding restore.
Keep up the good work.
You are fast with that screwdriver!
lol
When I worked in the Hi Fi trade from the 1970s to 1980s a company called Jamo or Jano not sure of the exact name.
The rep came to my shop and the speaker makers philosophy if they had one was big box lots of drive units. This matched the desires of the people who brought them.
They used to come back and complain a few weeks latter when they found there Mates "Boxes" were better.
The mate had probably brought decent drive units and made decent cabinets.
These sound like Jamo Boxes ! There them alway :-) They might corrupt your concept of good sound.
What did you brush on foam seround to remove them. Just wondering. I watched lot of you restorations and all ways wondered what it was. Oh and thanks to you I've restored 3 pairs of speakers now. Believe it or not you inspired me to restore my first set a pair of pioneer CS-539 then CS-549. and a pair of pioneer S-H552F-K 4way speakers
только для гаража пойдет такие колонки
good work keep up good work
шикарно лайк !!
Bravo!
Крутяк молодец руки работают
Hat
looks professional!
Nice worck Man
Excellent.
Đồng hồ SK chắc là Việt Nam
молодец высший класс
Hay engineer you are anjod plz rivover it and wow amazing content😍😍😍😍😍
Very good
Sounds good
אלוף
good job
ух ты класс звук утебя получился
Felicitari ! Nice rebuild.
Good job
You put a lot of work into these but I'm not sure if it would have been better to invest that time and money on a new pair of speakers that may have a better sound. It must have been a fun project !
良く直したね、と言いたいがあまりに雑なのでびっくりしました。
Ciekawe jak długo tak zregenerowane głośniki wytrzymają. Coś czuję że cewka długo nie wytrzyma.
👏👏👏👏👏👏👍👍🇦🇷🇦🇷
good bro
👍👍👌👌
Hahaha, nice!!!
Hace de todo el uña sucia..
Nyc
wonderful
Muito bom
They look like B&O or Wharfedale Speakers but the name on the back of the box says Ahudor. Good speaker cables,
Correct me if I'm wrong but you didn't have to fix the subwoofers on the side maybe clean them up but definitely not a foam replacement I mean they look perfect cause I'm guessing they had rubber surround which should have been fine
Should be more of these videos and less of the speaker destruction videos. lol
Это где так использовали эти акустические системы,что бы довести до такого состояния?
nice
Each time I'm hearing the radioactive sound
He is wearing the watch he restored😄
Su sebili bekliyoruz...
👏👏👏👏👏
TOP
Why did you refoam those crappy plast subs on the side they still looked alright
what kind of solvent and glue do you use?
Back to the Future speakers?!
I suspect these are White Van speakers judging from the stupid number of drivers and configuration
I think they are Rockville speakers
@@alivenizif I think so too
PA5cAl1 is right
Defiantly got to be white van.
woww
Genial!!
Naic
Can u give
the dimensions of the box ? Plan ?
A cho e hỏi đẩy kia tìm kiếm tên như nào v ạ
Hello sir you did a good job !!I did this also a couple years ago. Where a found some by the driftstore
The trick is to find the right diameters. For the speakers
To glue, you have special speaker glue .And you glued on with a brush
To clamp the foam roundings to the base and the speaker . Use a 220v wire cable Lay it around the glued speaker and than put on clothespin to set.. the hard part is to center the foam rings ..They need to perfect in the middle, so the coil inside the magnet go s straight up and down in one movement
My speakers are still playing by a friend
конечно результат хрен его знает но такую музыку включать на хороших колонках ну бред же
I asked what style of speakers those are
I want to buy this system!
İlk !!!
Where did can find the black round rubber ?
Parts express
Can get cone or the rubber surround as a kit or individually for most size woofers,subs,mids etc...