This is one of the best videos I have seen!! I did not even think of using a WiFi module out of a tablet for use as a WiFi receiver that works over any USB. AWESOME!!!!
1. To drop voltage with 2 diodes will not work if you use pwm powersupply, some diodes can cut the pwm. So you need to be more specific to general diy guys. 2. Most diodeas have voltage drop of 200mv, so you need to be more specific too.
1:40 how do you download a driver for your Wi-Fi module if your Wi-Fi module requires a driver to allow you to go on the internet to download the Wi-Fi driver to drive the Wi-Fi module
not every tablet has a wifi module. newer ones have it built into the main board and you cannot remove it. Also it is BEST ti yse 3.3 regulation that a pair of diodes. And arduino breadboard PSU will work also
I know Im asking the wrong place but does someone know of a trick to get back into an Instagram account? I was stupid lost the account password. I appreciate any help you can give me!
@Jasiah Benedict Thanks for your reply. I got to the site on google and I'm trying it out now. Takes quite some time so I will reply here later when my account password hopefully is recovered.
I had a samsung bluray player that doesn't power up or anything it has a built-in wifi 802.11g/b/n I install it on my dell mini 910 and install ubuntu and it works like a charm also I am gonna use the blue laser for another project
I wonder if salvaged WiFi from sky box or router would work ....sky 1 is actually off the board with jst connection .....or would there be a driver problem lol
Bike Jake closed core and wrapped in tin foil would do just fine if it really is issue, but the radio signal used by this is in the spectrum of megahertz. meanwhile the inductor for buck converter wont use more than 70 khz. alsoo if the inductor would be isse the charging circuit and the processor voltage regulation circuits in the tablet would also cause problems when used there
I have a challenge for you. Build a 3 stage lab power supply using components salvaged from 'wall wort' transformers, and small common switch mode power supplies. By 3 Stage I mean build a power supply that can be bridged in different configurations. For example the supply could be set up where Stage 1 and 2 are in series for a +/-15Vdc supply for op amps, while stage 3 is available for powering other devices at different levels. All stages must be independently adjustable for 1.5-15 volts DC in the 100mA to 1-1.5A range. Make a true low budget design by giving a target range for components instead of specific parts. Instead of listing a part like a TIP42 Transistor, list PNP BJT Transistor with Ubc/Ube/Ic/etc. This will help people think about using what they can salvage instead of ordering a specific part just because you used it. Most of all, you can't use hobby specialty parts so no LM317s etc. Most people can salvage 3-4 switch mode power supplies and wall worts if they don't already have some laying around.
This is one of the best videos I have seen!! I did not even think of using a WiFi module out of a tablet for use as a WiFi receiver that works over any USB. AWESOME!!!!
1. To drop voltage with 2 diodes will not work if you use pwm powersupply, some diodes can cut the pwm. So you need to be more specific to general diy guys. 2. Most diodeas have voltage drop of 200mv, so you need to be more specific too.
1:40 how do you download a driver for your Wi-Fi module if your Wi-Fi module requires a driver to allow you to go on the internet to download the Wi-Fi driver to drive the Wi-Fi module
chems use the internet you used to type your comment.
chems LOOOOL. yes what he said
I bought a pair of cutting pliers that require a pair of cutting pliers to open. I don’t know what to do?
This is a nice DIY to try.
Really good ! Recycle and save the planet !
maaaantaaap bang.....saya sudah buktikan....makasih ilmunya semoga bertambah ilmu rejeki anak n bini wkwkwkwkwkw
So, Theoretically you could connect some sort of USB port in place of that wifi module on tablet, and connect hub or mouse/kb. lol
Nice work
Could you please tell me, can we use this module with Arduino...
Please make a video on it.
Regards
not every tablet has a wifi module. newer ones have it built into the main board and you cannot remove it. Also it is BEST ti yse 3.3 regulation that a pair of diodes. And arduino breadboard PSU will work also
Very true! I have 3 broken tablets here and in all 3 the Wi-Fi module is built into the board
I'm very curious from where R U from? :) Nice tuts!
Electronoobs russian
I know Im asking the wrong place but does someone know of a trick to get back into an Instagram account?
I was stupid lost the account password. I appreciate any help you can give me!
@Ira Lennon instablaster :)
@Jasiah Benedict Thanks for your reply. I got to the site on google and I'm trying it out now.
Takes quite some time so I will reply here later when my account password hopefully is recovered.
@Jasiah Benedict It worked and I now got access to my account again. I am so happy:D
Thank you so much you saved my account!
Epiiiic!
Muito bom ! Tenho muitas placas de tablet aqui!
I had a samsung bluray player that doesn't power up or anything it has a built-in wifi 802.11g/b/n I install it on my dell mini 910 and install ubuntu and it works like a charm also I am gonna use the blue laser for another project
Useful video
I wonder if salvaged WiFi from sky box or router would work ....sky 1 is actually off the board with jst connection .....or would there be a driver problem lol
dave Yates check what chip has been used! Realtek chips are mostly plug and play!
how to make wifi adapter with a television wifi card at home
this video has help me a lot keep up the good work
Build for dongle tv my friend ..thts will be amazing..my friends
interesting project ! Buck or Linear ?
One question that , can it is also make by mobile motherboar?...
exactly what I was looking for...
if you want to look hardcore you can make buck converter 5 to 3,3 v instead of using linear regulation
Gotin Fuklio The inductance would cause interference with the radio.
Bike Jake closed core and wrapped in tin foil would do just fine if it really is issue, but the radio signal used by this is in the spectrum of megahertz. meanwhile the inductor for buck converter wont use more than 70 khz. alsoo if the inductor would be isse the charging circuit and the processor voltage regulation circuits in the tablet would also cause problems when used there
too much explaining
(blown mind)
Just why
how about using the batry as a backup power pack for phones or reusing the other parts
good idea
Drivers for XP pc's?
i want you make an video to show us haw to convert 3. 7v to 5v for power bank but without pcb i will be happy if you reply me thank you.
Can you program esp8266-01 to work as wifi adapter for a linux(ubuntu) machine
awesome
Can i get wifi adapter with android phone
Hello where you get the ac11... Ic or something
Can i integrate this WiFi with Arduino UNO ?
Please make a video on SONAR Transducer DIY. or atleast tell me how to make it.
Excellent
What's that music ? Quake ish is it downloadable
did someone find the windows driver for this wifi board, I could not find one that works. Any help?
Wow!
in mine the wifi module is part of the same board as all the tablet
o no just take it out
Hello Sir. I need mobile rang booster circuit if you have any circuit plz reply and make video.... Thx
Wow i will try this
I love this channel xD
same i just subbed
How do you draw anttena on your board? Should it be L or T shape
Tbh for this small an antena it doesnt matter at all
That PCB antenna is awful, however nice project
no ablo taka taka señor
how to make diy hotspot ? please
excelente video saludos
wtf duz dat meen
IN4007 diode in series are applicable??? or which diode should i connect??
It can be 1N4007, because voltage drop is about 0,7V each. In series that means 1,4V. So 5V - 1,4V = 3,6V.
i try two series diode in4007 and the multimeter shows 6+ volts,i supply it with 5v
Is the same possible with ESP8266?
yyyaaaaaassssssss
I have a challenge for you. Build a 3 stage lab power supply using components salvaged from 'wall wort' transformers, and small common switch mode power supplies.
By 3 Stage I mean build a power supply that can be bridged in different configurations.
For example the supply could be set up where Stage 1 and 2 are in series for a +/-15Vdc supply for op amps, while stage 3 is available for powering other devices at different levels.
All stages must be independently adjustable for 1.5-15 volts DC in the 100mA to 1-1.5A range.
Make a true low budget design by giving a target range for components instead of specific parts. Instead of listing a part like a TIP42 Transistor, list PNP BJT Transistor with Ubc/Ube/Ic/etc. This will help people think about using what they can salvage instead of ordering a specific part just because you used it. Most of all, you can't use hobby specialty parts so no LM317s etc. Most people can salvage 3-4 switch mode power supplies and wall worts if they don't already have some laying around.
WWWWWTTTTTTTFFFFFFF?!?!?!?!?!?!?!?!?!?!?!?!?!?!?!?
Music name please?
Diodes value?
any from the 1N400x family
Iam 1000th liked
hey aka kasyan please give a link for PCB layout please
hey, www.kit-shop.org/zip/wifi.zip
luv it
i just subbed cuz it helps so much thx again kaysan tv
any compatible usb wifi for android mobile mine inbuilt is not working
bl r8801 wlan module
yeah... I had same module from working tablet... but I broke the soldering track's while desoldering...😂😔
ha!
Hi, can you make an old printer to the Wireles printer
No
can i change the ic AMS using ic LM 13003 XA TH.? info please
suuperr
How can i this module in mobile android?
hook up a mini usb cable instead of a regular usb cable
Can you please make a video about it?
yes please
VERY VERY LIKE
:D
super duper again
how can I download pcb??
u cant tho
www.kit-shop.org/zip/wifi.zip
Can you just make a wifi adapter out of a circuit?
nice laptop
Please give me this module USB driver link
U are russian ?
No, I'm armenian
please firmware compatible with chip wifi esp8089 , for tablet allwiner23 q88
:)
all the other ones are sum like Russian and Portuguese people and the subtitles in English suck
awesome