KECO’s Lateral Tension Beam
HTML-код
- Опубликовано: 7 сен 2024
- The latest LTT design from KECO incorporates a larger 1/2" threaded rod along with wider stationary and drive shoes to apply pressure perpendicular to KECO Centipedes. This allows use with an offset where the rod can be above and below work areas or body lines.
The KECO LTT (Lateral Tension Tool) provides technicians with lateral tension to improve metal flow during a glue pull repair. The release of tension with a lateral motion from crown areas promotes needed relief when pulling large dents and collision damage from panels, doors, seams, and body lines. Combine the LTT with the K-Beam®, K-Bar® or other KECO premium GPR tool. Recommended with KECO's high strength PDR glue to pull the deepest dents from virtually all metals used in vehicle composition.
Now available on www.kecotabs.c...
How about you send us these new tension sets to go with our 3 Keco systems we bought last year at Defouw bodyshop. These look to work better than the threaded rod set up.
И где тут создаётся напряжение? Надеюсь никто не купит.
Что за дичь?😂😂😂
De