Thik you sir aapka video dekh ke Aaj kisi ka Ghar ka new door closer laga paya pahle toh bahut kosish ki lagne ka kahan kahan holl kr Diya uske door ka 😂 do baat suna bhi par aapka video dekha toh samjh me aaya or success ❤ thank you so much ❤️
Thanks brother mai le aaya door closer, right door pr left side ka door closer bnakr de Diya tha mere father saab ne...oor khul nhi ra tha...door. fir Maine cap khol k machine ko ghuma k cap neeche lga di. Or fix Kiya door open close bhot ashe se ho ra hai...bhot bhot dhanyawad...
Thank you very much. I will try the side screw to adjust my door because mine comes with a bang making too much noise. I am a housewife. I do most of the jobs in the house myself. Thank you very much for this video clip. Just what I needed to learn the adjustment, God bless
Very informative and useful video. It could've become more effective if you show the screw part in full visual & little more. Any thank you for what you've done.
Not correct but misleading information. The manufacturer provides a template diagram along with the door closure and the holes for the screws are to be marked on the door and the frame and the fitting is to be made accordingly. After fitting the door closure the speed of the door is to be adjusted by the speed screw - for increasing it should be moved in anti clock and decreasing, clockwise direction. Similarly for adjusting the latch speed another screw should be moved and adjusted. Remember, while drilling holes on the door and the frame the diagram printed on the paper should be fixed or stucked on the door and the frame. Holes must not be drilled without the help of the diagram. The main arm should be fixed at 90° by adjusting the other screw of the arm. Unfortunately, the majority of the carpenters being illiterate or semi literate can't read and understand the fitting instructions. Don't follow the directions given in the demo, follow the written directions given by the manufacturer only.
Hello Sar Ek Bar aap jitne bhi section Hote Hain Sabhi section Ka Naam Bata dijiye jisse Ham Sabko Maloom ho jaaye kaun se section kis kaam mein Aata Hai Kaun section kitne inch ka hota hai
अरे भाई जी हमारे एलमुनियम की जो ऊपर वाली स्क्रू है वह बिल्कुल उसे हो गई है और उनका साइज़ ओवर हो गया है साथ ही साथ जो हमारी चौखट है चौखट पर जो दो स्कूल लगे हैं वह लोहे की है तो अब इसका ओवरसाइज जो हो गया है अल्युमिनियम का कीवaad पर इसका समाधान jese kre
you probably dont give a shit but does any of you know of a trick to log back into an Instagram account..? I was stupid lost my password. I would love any tips you can offer me!
Sir Apka standerd tarika aur map nahi sahi nahi hai . sahi Tarika hai door closer ki adjusting side kabje ki sade taraf se only 5.5"lekar screw kar do .nu.2 upar ki fitting Jahan se door closer ehd hota hai uske theek upper Patti Ko screw kar do .uper ki rad jijme choodi Bani hoti han wo 90°me aur door closer me Kasi Patti 30°me honi chahiye
Dekhne e liye nahi sir. Batane ke liye bahut bahut dhanyawad. Bahut acche tarike se aap ne bataya hai
Fir se ek baar dhanyawad
Thik you sir aapka video dekh ke Aaj kisi ka Ghar ka new door closer laga paya pahle toh bahut kosish ki lagne ka kahan kahan holl kr Diya uske door ka 😂 do baat suna bhi par aapka video dekha toh samjh me aaya or success ❤ thank you so much ❤️
Thanks brother mai le aaya door closer, right door pr left side ka door closer bnakr de Diya tha mere father saab ne...oor khul nhi ra tha...door. fir Maine cap khol k machine ko ghuma k cap neeche lga di. Or fix Kiya door open close bhot ashe se ho ra hai...bhot bhot dhanyawad...
Bhai sahab aapki video dekhte Mera Dor closure 2 minut mein main 2 din se pareshan ho raha tha aapko tahe Dil se dhanyvad
Sabse accha tarika aapne bataya hai
Aap bhot he accha door clojar lagatey hay
Thank you very much. I will try the side screw to adjust my door because mine comes with a bang making too much noise. I am a housewife. I do most of the jobs in the house myself. Thank you very much for this video clip. Just what I needed to learn the adjustment, God bless
भाईं आप बहुत अच्छी जानकारी देते हो
Thanks bor I'm like bor aluminium like
Very informative and useful video. It could've become more effective if you show the screw part in full visual & little more. Any thank you for what you've done.
Bohot aache bhai helf full vedio hai nice
Jordar aaj mera bhi kaam ho gya
बहुत खूब सरदार जी
Good job 👍🏻
Shi. Trika. Smjhne. Ka. Bhai
Bahut badhiya bataya
Thank you for your imp information... Good job n keep sharing imp videos
बहुत अच्छा तरीका है आपका
Bilkul sahi hi.a niyam say kiya gaye hi.
Very Nice video Bro 🤔💯 थैंक यू
Bhayya gate m 4 kbje lgane ki video bnana zaroor
Bhut bdiya Bai g
Very nice sir
Not correct but misleading information. The manufacturer provides a template diagram along with the door closure and the holes for the screws are to be marked on the door and the frame and the fitting is to be made accordingly. After fitting the door closure the speed of the door is to be adjusted by the speed screw - for increasing it should be moved in anti clock and decreasing, clockwise direction. Similarly for adjusting the latch speed another screw should be moved and adjusted. Remember, while drilling holes on the door and the frame the diagram printed on the paper should be fixed or stucked on the door and the frame. Holes must not be drilled without the help of the diagram. The main arm should be fixed at 90° by adjusting the other screw of the arm. Unfortunately, the majority of the carpenters being illiterate or semi literate can't read and understand the fitting instructions. Don't follow the directions given in the demo, follow the written directions given by the manufacturer only.
Right
My door now bangs shut with a loud noise I dont like so should I tighten the side screw. Confused diy house wife.
Supar sir g
Dhanwaad veer 🙏
सर मैने आपके चैनल को सब्सक्राइब किया हुआ है। मै भी एल्यूमिनियम का काम शुरु करना चहता हूँ। कृप्या एक वीडियो स्क्रू का भी बनावें। धन्यवाद
Hello dear mujhe sbhi aluminum section ke name size or kis- kis jagah inka use hota hai
Ki jankari chahiye..?
Plzz btaiye??
0133ततेवQजि6इहगडफम क्सक्सग्जल
agar door round vala ho uper ki side to door closer kaha lgatey ha
bhai jaan kabutar Ghar Se udhay Aasman Aasman Se Ghar aye khi aur na bethe kya kare bato bhai
WELLDONE FOR GOOD GUIDE
Hellow sir ji.. domal section ke bare me agar aapke pass koi jankari hai to please us par video banao. Ke domal section me window kese banai jati hai.
Nice work sir please keep it up
स्लाइडिंग डोर कैसे लगाते पार्टीशन
Ye center mai b laga sakhtey hai
Very good bhai 🧡🧡
Bhut khusi hoti hai sir
Kabje Ki tarafh se kitni duri pe lagate h isko
Bhut bhut thanks 🙏
Nic video
Sir wel home exclusive looks hardware collection hydraulic door closer legana wala banda manage kara please
Good veere, you are all rounder, even in electricity too
Help!!!
Meri door puri band nhi ho rhi... please share some tips
Good video
Iron frame me kaise lagaye?
Thanks bhai samjhane k liye
Hello Sar Ek Bar aap jitne bhi section Hote Hain Sabhi section Ka Naam Bata dijiye jisse Ham Sabko Maloom ho jaaye kaun se section kis kaam mein Aata Hai Kaun section kitne inch ka hota hai
Thanks Bor
Kabje ke side se kitane inch chhor kar laga rahe ho
Is ko hatana ho to hta sakte h kya
Thank you sir;kichen bnane ka trika bi btaya please sir
Aap hamko ye batao ji ki hardolik vala kichaen kaose banate hain
Good work thanks
paji hedal lock kida lagda
Good 💖💖👌
Pure pahle Nahin Khuli pure dudh Nahin khul gaya to Uska Kya Karen
Door closser lgaye ke bad darwaja poor band nhi ho rha he karib 4-5 Inch khulla rhta he kya karn ho skta he
Very nice ji
Bai Sewak mechanical tusi ji?
Sar door tiet khul raha hai .use shi kase kare
Diwar se kitne door lagana hai.
Good work Sir
आपके विडिओ बहुत अच्छे है, मुझे PVC डोअर बाणाने की मशीन चाहीये क्या आपके पास कोई जाणकारी है क्या? हो सके तो आपका मोबाईल नो फिजीए.
Idia hai roj subah muth mar lo
Alluminium virtical door paaa lock lagana dikaya sir please
अरे भाई जी हमारे एलमुनियम की जो ऊपर वाली स्क्रू है वह बिल्कुल उसे हो गई है और उनका साइज़ ओवर हो गया है साथ ही साथ जो हमारी चौखट है चौखट पर जो दो स्कूल लगे हैं वह लोहे की है तो अब इसका ओवरसाइज जो हो गया है अल्युमिनियम का कीवaad पर इसका समाधान jese kre
Nice
Bhai shab door closer ko lagane ke baad door ko khula kese rakhe Pls reply
Thank uh sir this is amazing work 👍
you probably dont give a shit but does any of you know of a trick to log back into an Instagram account..?
I was stupid lost my password. I would love any tips you can offer me!
@Connor Lorenzo Instablaster :)
TQ bhai ji
Bhai sab door colser sab same hota hai Kya
t
Very good explanation for door closer installation, thanks.
Door khichna bahut hard hogya hai kya kare
Very nice
Thanks sir 👍👌
Sar aap kahan se ho
Thanks a ton Sevak vir ji
Good job bro
Thanks for sharing....
1 no. Wala scroo kis kam aata he
Hamarey pas fatke hay to magar us me nahi laga pa raha hu
Ji kya ham doors ke andar ki side lga skte hai or doors bàhar khule
ji sir lga skte ho
Bilkul lga salte hai
@@aluminiumpoint sir andar se kaise lagaye
Mr sewak ki awaz to hai yeh
please tell best company in India and average price and variant
Guru apne chale ko hmesha poora kaam q ne sikhata guru ji😂
Good
Good one
Sir Apka standerd tarika aur map nahi sahi nahi hai . sahi Tarika hai door closer ki adjusting side kabje ki sade taraf se only 5.5"lekar screw kar do .nu.2 upar ki fitting Jahan se door closer ehd hota hai uske theek upper Patti Ko screw kar do .uper ki rad jijme choodi Bani hoti han wo 90°me aur door closer me Kasi Patti 30°me honi chahiye
Mast sir
Sir ji sliding door me roller lagane ka vidio upload kijiye plz
Mast sir aur video dalo
Super
How to adjustments?
Tepar clip kitna degree me kating karte he?
35
Itni der me to ham 4 doorkalojar lagate hai sir
Sahi baat h.
1 ਨੰਬਰ ਨਟ ਬਾਰੇ ਦੱਸਿਅਾ ਨਹੀ ਕਿ ਕਿਸ ਵਾਸਤੇ ਹੁੰਦਾ ਹੈ ...
Veere Punjabi bol k video banaa Leni c. .Hindi bol reha Punjabi style ch...😊 Darwajey
Aapki screw driver machine kaun si company model ka hai
Kitne size mein Badhana Hai Pata hi Nahin sar
Sir iska Price kitna hai
Thank u sr
Ok