Custom paint instructor Simon Murray shows how to prep and paint multiple surfaces including plastic, metal, wood and more. www.smdesigns.... airbrushpaintd...
Just starting out with airbrushing. I don’t have a compressor and gun for spraying the base coats as you demonstrate. Can these products be sprayed with just an airbrush?
Is it possible to use the autobourne sealer directly onto steel? Does it adhere well? I'd be using it for a project that would not be exposed to rain/water.
Hi not sure which sparkly effect you are referring to but all products are available on the links below the video. For more in depth info please email us at info@smdesigns.co.uk
Hi Simon ... thanks for such a clear and concise video. I have learnt so much in less than 15 minutes!! I do have a question though. As a new venture, I am going to be painting old pieces of EPNS or Silver plated items to include teapots, candle sticks, etc. Some of these items may be seriously tarnished and contain residues of old cleaning solutions. Could you possibly let me know the following: 1. What preparation would you do and what would be your first layer to ensure a good paint adhesion? 2. Some of these items may need washing up ... do you think the Createx External Clear Coats would be okay for the final treatment layer ... allowing for immersion in hot soapy water? Thanks for your help. Sally
Hi Sally, I would use a red scotch bright pad and an alcohol cleaner. I would then use Createx Scenix clear for both an initial coat and also a top coat.
no Ronakaweed The Autoborne sealer I used was shot after 15-20 mins followed by fairly heavy masking, however it would do no harm to scuff with a red scotch bright pad especially if you were using normal paint.
Hello, would you use the AutoBorne sealer on styrene as well? I've been thinking to dab more in to createx paints with my model building since I've had so many issues with other brands. Been testing Createx a bit and so far like it, though I've used Opaque Black or White from the wicked line as a primer. Thanks for a great video! Seem there's not a lot of videos covering Createx products...
@@SMDesignsAirbrush Nice, thank you. I will have to check it out. Tired of my model paint primer ripping of with regular masking tape... Tried cleaning parts, sanding parts.. have not helped. So far Createx seem to adhere a lot better.
@@ficklampa if you are having any problems a coat of 5092 flexible adhesion promoter first will do the trick! you can follow the links below the video for more info.
@@SMDesignsAirbrush Thanks for the tip, I will try with the AutoBorne sealer first and see if that works, if not I will try that - though it seems 5092 is more for latex?
@@ficklampa yes more for latex but but it was just a suggestion if you are having problems with adhesion, you would still be obliged to spray the Autoborne sealer after the 5092
Brilliant info. Thank you Simon.
Allways excited to see new vids Simon. How about a new airbrush tutorial? Got to keep the fans happy. Lol
Awesome tech info for painting
Just starting out with airbrushing. I don’t have a compressor and gun for spraying the base coats as you demonstrate. Can these products be sprayed with just an airbrush?
Is it possible to use the autobourne sealer directly onto steel? Does it adhere well? I'd be using it for a project that would not be exposed to rain/water.
My God, this is great. I want to spray paint on my Sennheiser microphone. How can I do that sparkly effect?
Hi not sure which sparkly effect you are referring to but all products are available on the links below the video. For more in depth info please email us at info@smdesigns.co.uk
Do u sell the tank blanks.. I really do luv your work it's great
No Johnnie Im afraid we dont sell the blanks.
Hi great vid can you tell me if this paint will work on eva foam? Thank you
Hi Simon ... thanks for such a clear and concise video. I have learnt so much in less than 15 minutes!!
I do have a question though. As a new venture, I am going to be painting old pieces of EPNS or Silver plated items to include teapots, candle sticks, etc. Some of these items may be seriously tarnished and contain residues of old cleaning solutions. Could you possibly let me know the following:
1. What preparation would you do and what would be your first layer to ensure a good paint adhesion?
2. Some of these items may need washing up ... do you think the Createx External Clear Coats would be okay for the final treatment layer ... allowing for immersion in hot soapy water?
Thanks for your help.
Sally
Hi Sally, I would use a red scotch bright pad and an alcohol cleaner. I would then use Createx Scenix clear
for both an initial coat and also a top coat.
@@SMDesignsAirbrush
Hi Simon ... you are a star!! Thank you so much for getting back to me on this ... really helpful!! :0)
Where do u get the cleaner for metal, specifically allow or brass?
any alcohol pre cleaner will work.
Was the steel resanded after the self etching primer?
no Ronakaweed The Autoborne sealer I used was shot after 15-20 mins followed by fairly heavy masking, however it would do no harm to scuff with a red scotch bright pad especially if you were using normal paint.
Hello, would you use the AutoBorne sealer on styrene as well? I've been thinking to dab more in to createx paints with my model building since I've had so many issues with other brands. Been testing Createx a bit and so far like it, though I've used Opaque Black or White from the wicked line as a primer.
Thanks for a great video! Seem there's not a lot of videos covering Createx products...
Hi Andreas, yes the Autoborne will work fine on styrene.
@@SMDesignsAirbrush Nice, thank you. I will have to check it out. Tired of my model paint primer ripping of with regular masking tape... Tried cleaning parts, sanding parts.. have not helped. So far Createx seem to adhere a lot better.
@@ficklampa if you are having any problems a coat of 5092 flexible adhesion promoter first will do the trick! you can follow the links below the video for more info.
@@SMDesignsAirbrush Thanks for the tip, I will try with the AutoBorne sealer first and see if that works, if not I will try that - though it seems 5092 is more for latex?
@@ficklampa yes more for latex but but it was just a suggestion if you are having problems with adhesion, you would still be obliged to spray the Autoborne sealer after the 5092
I wish there was more substrates to watch
I cant really think of anything else I could have shown other than a piece of paper I guess.
@@SMDesignsAirbrush oh, no i don't mean it in a bad way. Just could watch your videos for hours.
@@jamesmcconnon2 lol James. No worries, I wast being sarcastic I genuinely couldn't think of anything else other than paper or canvas.