hello,i wold like to say thank you for the videos they are very helpful.Can you also make a how to video on how to design the simulation of the motion of the mechanisms please
I just came across your channel and your work is quite impressive. No other channels on youtube are doing on mechanisms extensively. You really should start making tutorials brother. I must tell you this if you make tutorials on the work all the mech students definitely gonna be your students including professors
My thoughts exactly. Scissor mechanisms are nothing new. Show me the actuator and how the torque is transfereed. The top hinges are always the most stressed in applications like this and thus way more important to design correctly.
Wäre was für unser Auto gewesen.. Viel Spaß damit! Bauen gerade ein Expeditionsmobil, guckt gerne mal auf unserem Kanal oder Homepage oder Instagram vorbei. Freuen uns immer auf andere Verrückte 😉 frohes Fest!🎄🎁
It is an interesting concept, but a manual one with a "smart" lock would make it more market-friendly. Not only the cost of the unit, but its installation and maintenance would be big disadvantages, as well as the lack of handrails. Safety First.
Это- не лестница. Это- фигня, похожая на лестницу. Чтобы поставить ногу нужно около 30см (фут). Значит длина одной площадки около 60см. Не зря человека не нарисовали для масштаба!
Smart Ideas This is not a stair.This is somethyng, like a stair.To put a foot you need about 30cm (1ft).Useful only 1/2 of pad.This means that the length (depth) of one pad is about 60 cm (standart kitchen table!).Try to draw the man for scale. P.S. Sorry for my english, i studied it at soviet school :)
@@liefbrunhilda926 not so sure... a scissors lift works because it stays in a vertical column where the center of weight remains directly over the anchor points on the ground. There are no anchor points on this, it isn't strictly vertical and you'll be loading and compressing it on a net vector that approximates 45% several steps up... it'll sag, perhaps badly...
I just came across your channel and your work is quite impressive. No other channels on youtube are doing on mechanisms extensively. You really should start making tutorials brother. I must tell you this if you make tutorials on the work all the mech students definitely gonna be your students including professors
The touch of adding rusty girders adds a lot of sci-fi grittiness that I find appealing. Thanks for uploading.
you are welcome
Rediscovered 1930's tech. Awsome!
This would go great on a lot of agricultural and horticultural machines.
you are right (Y)
A great way to keep “friends” and family from dropping by. I would prefer a moat but this would be helpful.
🤗🤗
thank you. show more details please
Did not show the hydraulic mechanism properly
yes by mistake i couldn't make a detailed video , next time i will show .thanks
It's really nice to see your work 🙂
Thank you very much!
Supiri machn
Thank you machoo.... ☺️
Love the patina, 😁
ruclips.net/video/tYMj3O-K9Gw/видео.html
ruclips.net/video/-g-DmHADf-8/видео.html
Won't support the weight, we have stairs like this and they require a lot of wire to not colapse
I built a set from aluminum with adequate materials, and it is very supportive.
hello,i wold like to say thank you for the videos they are very helpful.Can you also make a how to video on how to design the simulation of the motion of the mechanisms please
I hope to make tutorials but need more audience, if can share on social media ,that would be a greatful help for me
великолепно! и безумная идея
They just have to make it light weight and thinner.
Yes that's right
Pls make the mechanism when it's provided with handrail...thanks
Ideal para veículos offroad.
Parabéns.
If it comes down to it, i'm crediting this.
Excellent idea of stair mechanism
Thanks
ruclips.net/video/tYMj3O-K9Gw/видео.html
ruclips.net/video/-g-DmHADf-8/видео.html
I just came across your channel and your work is quite impressive. No other channels on youtube are doing on mechanisms extensively. You really should start making tutorials brother. I must tell you this if you make tutorials on the work all the mech students definitely gonna be your students including professors
thank you ,i hope to start in the near future
@@ceylonCAD start soon brother. I would spend all my time learning those.
No clear view of top mechanizer.
no need. just from animation you can see and understand whole mechanism.
reliability of this mechanism in real life, is another topic %)
sure
My thoughts exactly. Scissor mechanisms are nothing new. Show me the actuator and how the torque is transfereed. The top hinges are always the most stressed in applications like this and thus way more important to design correctly.
ruclips.net/video/-g-DmHADf-8/видео.html
ruclips.net/video/tYMj3O-K9Gw/видео.html
Super sir PROJECTS
Wäre was für unser Auto gewesen.. Viel Spaß damit! Bauen gerade ein Expeditionsmobil, guckt gerne mal auf unserem Kanal oder Homepage oder Instagram vorbei. Freuen uns immer auf andere Verrückte 😉 frohes Fest!🎄🎁
Which pneumatic actuator is used please tell me
Nothing special, you can use any pneumatic actuators as per the design
The mechanism not showing us with clearly. But this nice concept. Thanks
ruclips.net/video/-g-DmHADf-8/видео.html
ruclips.net/video/tYMj3O-K9Gw/видео.html
Jincheng Zhang - Freight I Love You - (Instrumental Song Background Music)
Good
Staircase faces right as there is ripples on the stairs
the. raid
Please upload complete design along with parts of this assmbly
ruclips.net/video/qrDpNlUe8kM/видео.html
ruclips.net/video/-g-DmHADf-8/видео.html
great work
Thanks!
ruclips.net/video/tYMj3O-K9Gw/видео.html
ruclips.net/video/-g-DmHADf-8/видео.html
Wonderful,, I love this...
Many thanks!
Very good mechanism.....
thank you
www.adityasharmaacademy.com/2020/10/dead-weight-accumulator-construction.html
ruclips.net/video/qrDpNlUe8kM/видео.html
ruclips.net/video/-g-DmHADf-8/видео.html
It is an interesting concept, but a manual one with a "smart" lock would make it more market-friendly. Not only the cost of the unit, but its installation and maintenance would be big disadvantages, as well as the lack of handrails. Safety First.
I would install actuators protection locking mechanism for that design if the actuator is pneumatic or electric motor.
yes it should be installed ,
ruclips.net/channel/UCXMkuabfD_Wjo5GXkLWHTpA
beautiful mechanism 😍😍
'
nice idea...
but need to flat frame and not bump - not hump
Grt work!!!
Plz upload some machine design ideas
Subscribe & click the bell icon when uploading you can get notifications
ruclips.net/video/-g-DmHADf-8/видео.html
ruclips.net/video/qrDpNlUe8kM/видео.html
Hello, Could you show some security door mechanism for a mailbox for packages?? Thanks
yes ,INBOX your requirements please : sumedhachandranath82@gmail.com
ruclips.net/video/tYMj3O-K9Gw/видео.html
ruclips.net/video/qrDpNlUe8kM/видео.html
i really liked the animation, it's perfect ^^
thank you very much
ruclips.net/channel/UCXMkuabfD_Wjo5GXkLWHTpA
ruclips.net/video/tYMj3O-K9Gw/видео.html
It could be useful for the back of trucks, so workers can load and unload.
yes , definitely
ruclips.net/video/7lqS5Bh8igM/видео.html
ruclips.net/channel/UCXMkuabfD_Wjo5GXkLWHTpA
Super brother ,u have great skills
Thank you so much 🙂
ruclips.net/video/-g-DmHADf-8/видео.html
ruclips.net/video/tYMj3O-K9Gw/видео.html
Terinspirasi. Mantap
Cool Design, very useful in many places
thank you
what type of locking mechanism is used ? how does it stay in same state when some starts climbing ?
pneumatic power can be used with any suitable locking device or mechanical fasteners
Which type of fasterners are we going use
there are many mechanical fasteners that can be used
Mechanical fastners? Why not chemical or electrical or gravitational. Just wondering!
@SmartIdeas bro can you share us the pdf or any tutorial videos for this design?
sumedhachandranath82@gmail.com
Weird shadows at 1:11
Please show cut sections and handrail mechanism.
So....what most buses and RVs already have?
They didn't say it was a unique idea
Expensive and unstable mech that in reality would lead to people falling off and lawsuits
Wow superb explanation.... Great animation
thank you very much
ruclips.net/video/tYMj3O-K9Gw/видео.html
ruclips.net/channel/UCXMkuabfD_Wjo5GXkLWHTpA
How much weight we can on this type of stairs
It depend on area of the cylinder and working pressure, and also structure should be analyzed
ruclips.net/video/VEv6yBxloGY/видео.html
It crushes cans too.
hahahahahhahahah
Thanks !!!
Thankyou!!! Can you provide 3d step file or 2d cad?
Excuse me! Could you tell me which software you use to create this animation
solidworks
www.adityasharmaacademy.com/2020/10/dead-weight-accumulator-construction.html
What kind of software are you using.... thanks
solidworks
can you design a folding handrail for that ??
yes , i can design that too ,if you want
Which software used for these design?
solid works
Faltou um corte no 3D para ver melhor o dispositivo.
How to do velocity analysis for this mechanism
using solidworks , you can analysis any parameters of the motion
its not possible,only in designing
poor guy 😀
no i saw in reality
ruclips.net/video/7lqS5Bh8igM/видео.html
With that number of steps handrailing would be needed
yes , but here i didn;t show
@@ceylonCAD Ok, I was just wonder how the HR would fold out/in. would it be attached to the tread ends, the railing would have to be chain or similar
ruclips.net/video/tYMj3O-K9Gw/видео.html
ruclips.net/video/-g-DmHADf-8/видео.html
Kwikee makes this.
Niyamai bro
Thanks bro
Конструктивно сложна ,тяжела и,наверняка будет дороговата.
Emergency exit on stationary trains?
nope, i didn't apply safety bar.according to customer's requirements .
and it's a new design
Ну и в чём идея то? подобные механизмы довольно распространены, знаете ли...
please translate into English . i'm unable to read your comment
Lankawe kollek neda me...ela ela..
Ow ow 😊
ruclips.net/video/tYMj3O-K9Gw/видео.html
ruclips.net/video/-g-DmHADf-8/видео.html
good innovation,if possible please give reference where we can buy them
nowhere you can buy this.this is a design which designed under a special propose.
but you can hire smart ideas for your design
8007001936
What computer software is use for making this pls
solid-works
muito show mesmo
Its parts measurements ?
Xin chào cho mình hỏi bên CTY có bán thang xếp 4 tầng tự động ko
Can you make those stairs for 15 feet height..... Contact me.... If u can!
Hello Soni
Please drop your requirements
Whatsapp +94713972750
sumedhachandranath82@gmail.com
ceyloncadservices@gmail.com
А почему там ржавчина нарисована? У нас что везде ржавчина что ли?
OSHA ain't gonna like that
No handrails
also what if it triggers while using? Too bad for toes!!!!
ruclips.net/channel/UCXMkuabfD_Wjo5GXkLWHTpA
ruclips.net/video/VEv6yBxloGY/видео.html
Solo sirven para 1 metro? de altura?
Это- не лестница. Это- фигня, похожая на лестницу. Чтобы поставить ногу нужно около 30см (фут). Значит длина одной площадки около 60см. Не зря человека не нарисовали для масштаба!
please translate into English . i'm unable to read your comment
Smart Ideas This is not a stair.This is somethyng, like a stair.To put a foot you need about 30cm (1ft).Useful only 1/2 of pad.This means that the length (depth) of one pad is about 60 cm (standart kitchen table!).Try to draw the man for scale. P.S. Sorry for my english, i studied it at soviet school :)
This is finalized and there had no any problem as you mentioned above .any way thank you 😜
Приметивно
Is solidworks software used for designing this mechanism?
yes
ما شاء الله
www.adityasharmaacademy.com/2020/10/dead-weight-accumulator-construction.html
how costly are these?
this is CAD design, not a real fordable stair
This mechanic only fold only the first layer!! it's not possible to fold second, third, forth and so on layer! nice drawing but dynamic is not right
Ever seen a scissor lift? This’ll work.
:D
@@liefbrunhilda926 not so sure... a scissors lift works because it stays in a vertical column where the center of weight remains directly over the anchor points on the ground. There are no anchor points on this, it isn't strictly vertical and you'll be loading and compressing it on a net vector that approximates 45% several steps up... it'll sag, perhaps badly...
A bit too limited in it's range to be useful
Noice
а чего 3д модель такая ржавая?
Так в подвале-же... там сыро.
@@minimuk вентиляцию для подвала сделать и влага уйдет
ruclips.net/video/tYMj3O-K9Gw/видео.html
ruclips.net/video/-g-DmHADf-8/видео.html
в поездах в вагонах такая фигня есть
can't understand
в поездах, вагонах такой фигни нет.
Senhor K !!🐸
Чётко!!!
הי יש לכם סניף בישראל?
phone number היי what the?
Email : sumedhachandranath82@gmail.com
It's custom faded? 🤣
ha ha :D
ruclips.net/video/-g-DmHADf-8/видео.html
ruclips.net/video/tYMj3O-K9Gw/видео.html
OK
ruclips.net/video/-g-DmHADf-8/видео.html
ruclips.net/video/tYMj3O-K9Gw/видео.html
Realview off
I just came across your channel and your work is quite impressive. No other channels on youtube are doing on mechanisms extensively. You really should start making tutorials brother. I must tell you this if you make tutorials on the work all the mech students definitely gonna be your students including professors
Thanks and welcome, in the near future i'll start a tutorial serious ,keep in touch
ruclips.net/video/-g-DmHADf-8/видео.html
ruclips.net/video/tYMj3O-K9Gw/видео.html
Good
Good
Thanks
What software program is using here?
solid works
www.adityasharmaacademy.com/2020/10/dead-weight-accumulator-construction.html