For sure its safer in a few ways no leads and wires to trip over less pack up and start up time less chance to be fired by electric , gad you like the review was even more impressed on the bigger job i did after this one mixing like a boss :):)
Hey my Rocking buddy :) It has been actually more impressive on a building site doing apartments been working in the stair ways so you know how awkward the are , but yes its performance was more than whats was expected :)
Hey Mac you know I say it as it is!!! I enjoyed this one the voice over was spot on, the details you give are exactly what I'd expect to hear from the pro. That's a stout looking drill,your right to test it in real conditions I'd say that drill will find its place in your business. I think you covered the subject well...had you to wait for bonding coat to go "off" before you laid on multi finish?? 💚👍
Cheers mate :) Yes this drill on another bigger job has actually performed even better than expected , Thanks for the feed back ate its much appreciated, Yes when i bonded I try and wait until it starts to colour like 50 60 % then i skim over I find as the bonding sets it helps the skim bond together and pull in a little , also youll find it takes slightly less effort and plaster to cover the 2 coats
@@nickywalsh8492 Have never been unfortunately one day/days I would love to travel all over Ireland wee have one of the best countries in the world with so much beauty
Hi mate I still have this bucket has lasted a long time also an even bigger one now LOL they seem great to me these are from refina not sure if they send gear you way but might be worth the look man
Hi mate yes its still going well I burnt the collo mix out i was mixing way to much with it , it had a little more kick to it this rubi is great for small work and that
@@macplastering I'm not sure what to buy. I do plastering dot and dab boarding, tiling so mixing adesive, self leveling floors ECT I did order on Saturday dewalt flexvault 54v but company rang this morning say they can't get it. So I thought I'd have a better look around
@@johno-gb7ci have used all 3 the dewalt is the strongest and heaviest it is good but I dont like the speed dial and not loads between the collomix and rubi the collomix can hold stronger batteries mate the dewalt is available on amazon - amzn.to/3akZA2y not sure if thats the same price you where getting it at ?
It's funny, back in the day we could strap every tool we needed to our trusty old push-bikes. Rules, shovel, bag of tools, masher, hod on the shoulder. Sometimes riding 12-15 miles to and from jobs every day - during the hot summers and thick snow and ice. (Yes! we 'were' allowed to carry on back then ;-) The thing is .... has the 'competency' kept up with the enormous amount of tools plasterers 'apparently' need these days? ........ Hmmmmm?? :-)
I seem to be surrounded by top class extremely good and very competent plasterers the last load of years and some f them could near plaster a landing wall to a high standard with an old boot , but thankfully some companies out there have design newer and better tools to help lessen the pain and strain that this game has to offer , and believe it or not it all started with the old school plasterers , we younger's have a lot to thank them for buddy nothing wrong with hard work but I always say work smarter not harder , Hope your having a great week Peter
Had used the collomix more but its now in getting serviced I was pretty hard on it mixing 3 bags a time but this boy is still going and batteries seem to last well
Yes used the dewalt and have the collo mix The collo mix is stronger and mixes it faster I think the rubi is made for smaller buckets , also have the refina petrol mixer its stronger than all of these its for mixing renders , thanks for watching mate :)
Looks like a tidy bit of kit but it only seems to be available with 1 battery. That's a bit of a con in my eyes especially as they want £100 plus with delivery for a spare battery! Rubi are an unknown as far as battery technology so i'll be giving it a wide birth.
Hey lee buddy so far it still working ok for me both it and the collo mix , the collo mix has a bigger whisk and one battery is bigger also on it , also got the refina power float that has 2 bats that fit to collo mix and the same the other way the power float holds the collo mix bats as they are made by metabo LOL sorry for all that info, but can be good to know also have a refina petrol mixer witch is a monster can mix render sweet. not sure if you seen any of those videos your more than welcome to have a look through them on the channel mate Anyway appreciate the comment :)
@@macplastering Not a spread myself man. I'm a plumber who cross trades a fair bit. Appreciate the trowel trades tho! You are one seriously skilled pink spreader btw! I just thought that if i was on a full bathroom blitz, say 30 sqm. No way would that mixer keep up with 1 battery.
@@leerolfe5332 It depends how much you put on in one go it should be able to mix a few nice sized buckets then charge between trowelling up but do agree 2 bats is far better , you could message them and say mac said you might do a deal with a spare bat lol :)
mac plastering Tile adhesive I was referring to matey. Say Keraquick, 40 min work time in reality so constant cleaning and mixing. After all Rubi is a tiling brand ;)
Sorry to hear your mate has bad health from this game for sure it is not kind on the biddy thanks for the nice comment mate yes I do always recommend outside and a mask
Beautiful mixer 🤩
Very handy and light batteries last a good time have more video to do on this little mixer yet and this was done a long time ago its still going well
Looks a really capable machine, battery is definitely the way it’s all going now, great proper working review 👍
For sure its safer in a few ways no leads and wires to trip over less pack up and start up time less chance to be fired by electric , gad you like the review was even more impressed on the bigger job i did after this one mixing like a boss :):)
Battery,Electric and Petrol-you got all the bases covered now matey-great stuff
Haha gone super wireless but yes cant wait to show more and do more with these drills :):)
Looks like a good bit of kit bud 👍👍keep them coming
Hey my Rocking buddy :) It has been actually more impressive on a building site doing apartments been working in the stair ways so you know how awkward the are , but yes its performance was more than whats was expected :)
mac plastering excellent bud 👍👍
Good vid mate keep em coming
you know it buddy this wee drill has been great so far :):)
You have a lot to do. Really great Video !!! Happy Sunday 💖
Hey Yvonne For sure ceilings is hard work above the head but some1s got to do it :):)
Awesome video
Thank you mate
Brilliant bud I need one these
the bats drill are so handy light a fast setup i thin i pushed the collo mix to hard its not as happy anymore :)
Great work
Thank you Norma :):)
Yep I like that mixer 👍👍👍
Hi Mark mate same here so far so good have recently used it on a bigger job and have been even more impressed with it
@@macplastering battery tools are the bees knees these days 👍👍👍
For sure and it seems they will just get better and better
Hey Mac you know I say it as it is!!! I enjoyed this one the voice over was spot on, the details you give are exactly what I'd expect to hear from the pro. That's a stout looking drill,your right to test it in real conditions I'd say that drill will find its place in your business. I think you covered the subject well...had you to wait for bonding coat to go "off" before you laid on multi finish?? 💚👍
Cheers mate :) Yes this drill on another bigger job has actually performed even better than expected , Thanks for the feed back ate its much appreciated, Yes when i bonded I try and wait until it starts to colour like 50 60 % then i skim over I find as the bonding sets it helps the skim bond together and pull in a little , also youll find it takes slightly less effort and plaster to cover the 2 coats
Haha , I had "change colour" wrote originaly and re worded it I shouldn't of bothered...what county you situated in ?
@@nickywalsh8492 Antrim mate wbu ?
@@macplastering 35 mins from Waterford city, 15 mins from clonmel,place called rathgormack.👍
@@nickywalsh8492 Have never been unfortunately one day/days I would love to travel all over Ireland wee have one of the best countries in the world with so much beauty
Great bit of kit mate but I would still keep your 110 as a back up
Oh yes ate the 110 will be the main boy for me and this is for the speed of setup needed on some jobs :)
Cannot seem to find those large buckets here-are they anything special Joe?
Hi mate I still have this bucket has lasted a long time also an even bigger one now LOL they seem great to me these are from refina not sure if they send gear you way but might be worth the look man
@@macplastering -i just found one here-100 litres with a splash lid but$135-about 65 british pounds-ouch!!!!
@@dismaldog Sounds like the collomix one ?
Would a 9amp replacement battery fit it ??
I am not sure mate
" First thing in the morning " YES ! When you are fresh last thing you want is too get dirty.
Oh man only thing worse is when your clean the night before and it happens on the nice clean non work cloths haha :):)
Do you prefer the 18v collomix mixer or 18v rubi mixer?
I think the collomix is the stronger drill but will put them head to head at some stage
Are you still using rubi mixer I'm thinking of getting one
Hi mate yes its still going well I burnt the collo mix out i was mixing way to much with it , it had a little more kick to it this rubi is great for small work and that
@@macplastering I'm not sure what to buy. I do plastering dot and dab boarding, tiling so mixing adesive, self leveling floors ECT I did order on Saturday dewalt flexvault 54v but company rang this morning say they can't get it. So I thought I'd have a better look around
@@johno-gb7ci have used all 3 the dewalt is the strongest and heaviest it is good but I dont like the speed dial and not loads between the collomix and rubi the collomix can hold stronger batteries mate the dewalt is available on amazon - amzn.to/3akZA2y not sure if thats the same price you where getting it at ?
@@macplastering £612 has the matebo got variable speed trigger and is it brushed
@@johno-gb7ci Not 100% sure mate I kbow the collomix and matebo bats fit one and another but not sure on its ful stats as never used one
It's funny, back in the day we could strap every tool we needed to our trusty old push-bikes. Rules, shovel, bag of tools, masher, hod on the shoulder. Sometimes riding 12-15 miles to and from jobs every day - during the hot summers and thick snow and ice. (Yes! we 'were' allowed to carry on back then ;-)
The thing is .... has the 'competency' kept up with the enormous amount of tools plasterers 'apparently' need these days? ........ Hmmmmm?? :-)
I seem to be surrounded by top class extremely good and very competent plasterers the last load of years and some f them could near plaster a landing wall to a high standard with an old boot , but thankfully some companies out there have design newer and better tools to help lessen the pain and strain that this game has to offer , and believe it or not it all started with the old school plasterers , we younger's have a lot to thank them for buddy nothing wrong with hard work but I always say work smarter not harder , Hope your having a great week Peter
That was almost poetry Mac .... well said :-)
@@CheckFred Im in the wrong trade for sure :):)
Came here after a year how's it holding up .
Had used the collomix more but its now in getting serviced I was pretty hard on it mixing 3 bags a time but this boy is still going and batteries seem to last well
On both only relay supposed to mix 1 bag at a time
@@macplastering that's a good product then ...earned its money 💰
@@mejustanormalguy4742 Both seem great to me would recommend 2 bats mate
@@macplastering gonna get one for the small jobs and keep my big one for the sites and cement .
That takes way way to long to mix up multi I think mate have you tryed the dewalt?
Yes used the dewalt and have the collo mix The collo mix is stronger and mixes it faster I think the rubi is made for smaller buckets , also have the refina petrol mixer its stronger than all of these its for mixing renders , thanks for watching mate :)
Looks like a tidy bit of kit but it only seems to be available with 1 battery. That's a bit of a con in my eyes especially as they want £100 plus with delivery for a spare battery! Rubi are an unknown as far as battery technology so i'll be giving it a wide birth.
Hey lee buddy so far it still working ok for me both it and the collo mix , the collo mix has a bigger whisk and one battery is bigger also on it , also got the refina power float that has 2 bats that fit to collo mix and the same the other way the power float holds the collo mix bats as they are made by metabo LOL sorry for all that info, but can be good to know also have a refina petrol mixer witch is a monster can mix render sweet. not sure if you seen any of those videos your more than welcome to have a look through them on the channel mate
Anyway appreciate the comment :)
@@macplastering Not a spread myself man. I'm a plumber who cross trades a fair bit. Appreciate the trowel trades tho! You are one seriously skilled pink spreader btw! I just thought that if i was on a full bathroom blitz, say 30 sqm. No way would that mixer keep up with 1 battery.
@@leerolfe5332 It depends how much you put on in one go it should be able to mix a few nice sized buckets then charge between trowelling up but do agree 2 bats is far better , you could message them and say mac said you might do a deal with a spare bat lol :)
not sure if u seen our new vid on our new home but man it need plumbing big time u should have a look tell me some ideas :)
mac plastering Tile adhesive I was referring to matey. Say Keraquick, 40 min work time in reality so constant cleaning and mixing. After all Rubi is a tiling brand ;)
Nice informative video liked keep up the good work and feel free to check out my latest video and thx plus sorry for the inactivity and disturbance 🙏🏼
Thanks man :)
Use a mask when mixing this stuff my mate got bad lungs for not wearing mask when mixing this stuff up don't risk your health
Sorry to hear your mate has bad health from this game for sure it is not kind on the biddy thanks for the nice comment mate yes I do always recommend outside and a mask
Good to see how long this lasts you I hope you get loads of mixes with it m8 👍
Hi Gordon mate for sure Hope they last years and years have used it on bigger hits and was very impressed :)