Dude, great job on video. Your honesty and being up front about being new to diesels was refreshing to see. I did the same mod myself. But i made everything. Turbo response is great and no more blow back. For some even better throttle response just before turbo kicks, throttle down then get on it!!!
I ran the bypass hose through a Oil Catch Can mounted on my frame back to the S&B PVC system to avoid emission issues her in Arizona. When I went through emissions testing and the guy saw my altercation at the S&B so he called over a Supervisor! After a lengthy discussion they let me pass? I made my Oil catch can out of PVC pieces I bought at Home Depot with a drain that I can get the oil out occasionally. If it was sending fumes/oil into the air I would have failed no doubt? FYI
U should make a list of mods you did. And links to where u can get all of it. Just subscribed to u, love the vids so I'd love to see all you've done in a short version.
I just run mine on 5 lol. I turn it down to 4 if I'm crawling in traffic but that's as low as I got. I need that S&B mouthpiece and do the PCV reroute to finish everything off for my motor mods
Imagine if you put a sump kit...a FassTi 150...get rid of factory fuel filter housing..ported fuel rail fitting..and get it tuned..you wished you did it long ago..what about trans mods man?gunna build it?shift kit for now?deep pan?doing a good job and it's looking good..next time your working in the engine bay..let some air out of the front tires and then the front end will be way lower for you!
Yo for the blocker plate let those bolts soke in some pb blaster and make sure you can get some good leverage on them. People recommend putting blankits on the engine or a pad or something when your up their so its more confy too. Overall that blocker plate is pretty quick and easy. Just make sure you turn it on and listen and feel for leaks cuz you dont need that. Lose all kinds of boost and stuff.
You’ll still be able to switch on the fly with the monitor that just one of the features of that monitor . It’s getting time to delete that EGR soon. I’ve got the modded up pipe for you free of charge . 👍
Bro just traded my 6.6 14 2500hd Denial got 6.7 Cummins megacab Larmie 15 only has 40k on it has 12 inch bulletproof lift on 40x14.50R24 Americain Forses twin trubo over 800hp payed 37grand for her. Getting it detail cause its really dirty. Miss the Duramax but it was stock only 70k miles.
Hi Bro. I am having a stock LLY and looking for some upgrades , I am wondering to buy S&B CAI + Mouthpiece & 3" Downpipe with a Y-Bridge, but I only have a question about the Y-Bridge, will it make any power difference or issues by the time? Any suggestions?
@jwmontoya Hello buddy 👋🏻 I’m just watching your truck videos ,, and I kinda wanna ask you a quick question .. did you ever had any problems with your head gaskets?? And witch were the symptoms?? Sorry to asks my friend .. I recently buy an lly im new to the diesel truck scene, and it seems like I’m going thru some bs, I’m just researching making sure what my real problem is before I mess up even more .. my name is Victor by the way I’m in Charlotte n.c .. your truck is very clean 🤙
hey man on a video you said that were waiting for the egr cover plate so I'm wondering how did that go? do you recommend to do that or do something else?
yeah it was really easy to do, it was really easy to do, I was scared to do it but it was really easy to do, yeah I could have paid someone else to do it but I did it and it was really easy to do, it was really easy to do. (The whole video)
Dude, great job on video. Your honesty and being up front about being new to diesels was refreshing to see. I did the same mod myself. But i made everything. Turbo response is great and no more blow back. For some even better throttle response just before turbo kicks, throttle down then get on it!!!
Appreciate it! I sold this truck and bought another LLY recently
Great video man looks warm in GA I’m jealous
does rerouting the pcv create check engine lights or no?
No
@@somedude6584 👍🏼
I ran the bypass hose through a Oil Catch Can mounted on my frame back to the S&B PVC system to avoid emission issues her in Arizona. When I went through emissions testing and the guy saw my altercation at the S&B so he called over a Supervisor! After a lengthy discussion they let me pass? I made my Oil catch can out of PVC pieces I bought at Home Depot with a drain that I can get the oil out occasionally. If it was sending fumes/oil into the air I would have failed no doubt? FYI
the turbo is much louder now :)
Good video update man, giving me some ideas 💡. Keep up the good work
thanks man
U should make a list of mods you did. And links to where u can get all of it. Just subscribed to u, love the vids so I'd love to see all you've done in a short version.
There is a full transformation video I’ve done of this truck with all the mods. Check it out
Love your truck man
appreciate it man
JW Montoya I want a mix of your truck and streetspeeds 717 dirtymax
digging the thumbnail!!!!!!
you know it!
Loving the truck
Know shit before you blow
Hey man nice video ! Quick question what did you use to block off the pcv plug on the mouth piece thanks looking to do this to my LLy
14 minutes of talking and then you point to what you did.....why not show putting the stuff in?
I just run mine on 5 lol. I turn it down to 4 if I'm crawling in traffic but that's as low as I got. I need that S&B mouthpiece and do the PCV reroute to finish everything off for my motor mods
Oh man and just you wait until u gotta install the DSP5 switch wiring lol
I'm not doing the DSP5 switch! LOL
Badass truck, keep up the great videos
Imagine if you put a sump kit...a FassTi 150...get rid of factory fuel filter housing..ported fuel rail fitting..and get it tuned..you wished you did it long ago..what about trans mods man?gunna build it?shift kit for now?deep pan?doing a good job and it's looking good..next time your working in the engine bay..let some air out of the front tires and then the front end will be way lower for you!
Not too worried about rebuilding the trans for now
Atleast be ready for the trans to fail. Mine ate itself with a small efilive tune 4 days after I did headgaskets and studs.
Yo for the blocker plate let those bolts soke in some pb blaster and make sure you can get some good leverage on them. People recommend putting blankits on the engine or a pad or something when your up their so its more confy too. Overall that blocker plate is pretty quick and easy. Just make sure you turn it on and listen and feel for leaks cuz you dont need that. Lose all kinds of boost and stuff.
You’ll still be able to switch on the fly with the monitor that just one of the features of that monitor .
It’s getting time to delete that EGR soon. I’ve got the modded up pipe for you free of charge . 👍
yeah, what I meant is that I'm getting the edge monitor but it won't be right away. so I'll have to use the autocal to switch the tunes for now
Bro just traded my 6.6 14 2500hd Denial got 6.7 Cummins megacab Larmie 15 only has 40k on it has 12 inch bulletproof lift on 40x14.50R24 Americain Forses twin trubo over 800hp payed 37grand for her. Getting it detail cause its really dirty. Miss the Duramax but it was stock only 70k miles.
I love Americain Forses too.
I shoulda got a Denial with americain forses
I like your head lights. Where did you get them?
markherron69 eBay
Hi Bro. I am having a stock LLY and looking for some upgrades , I am wondering to buy S&B CAI + Mouthpiece & 3" Downpipe with a Y-Bridge, but I only have a question about the Y-Bridge, will it make any power difference or issues by the time? Any suggestions?
@jwmontoya Hello buddy 👋🏻 I’m just watching your truck videos ,, and I kinda wanna ask you a quick question .. did you ever had any problems with your head gaskets?? And witch were the symptoms?? Sorry to asks my friend .. I recently buy an lly im new to the diesel truck scene, and it seems like I’m going thru some bs, I’m just researching making sure what my real problem is before I mess up even more .. my name is Victor by the way I’m in Charlotte n.c .. your truck is very clean 🤙
Whole lotta trok Shit lol
What was the mileage on your truck when you bought it
Hey man where’d you get the plug for the mouthpiece when you did the reroute ?
lowes
hey man on a video you said that were waiting for the egr cover plate so I'm wondering how did that go? do you recommend to do that or do something else?
Miguel Romero it came it. It’s installed now
Too much talking
Really?!?
Hey love your truck
thanks man
Hey your so lucky
yeah it was really easy to do, it was really easy to do, I was scared to do it but it was really easy to do, yeah I could have paid someone else to do it but I did it and it was really easy to do, it was really easy to do. (The whole video)
ruclips.net/video/SSEjPr0R19o/видео.html just got the lift finished!
Please get new head lights if you sell them
no, I'm doing the no headlight mod
JW Montoya 😤😤
Do you know why an oriental can talk about a Duramax? It’s made by Isuzu!
LBZ are better