I saved so much money on the widows operating system on my new PC build. You inspired me to build it myself and I just got everything activated and ready to go. Got the code within minutes. Thank you Ed, a man of the people
Ive been talking to my mom about your youtube channel and how your videos helped me build my first pc and uhhh.... This is the first video i watched with her and the intro was.... Something else
The challenge with fans in the bottom is the dust and/or the clearance for exhaust. Though many people place their computers on the desk or side table, there are still users that place them on a carpet surface and not think twice about that consequence.
Hey Edgar, your videos are awesome and super helpful, not only that they're entertaining also! Thanks legend! wishing you all the best and keep up with the amazing content!
@chese-dr9sb Air flow is good. I have it in the corner of my room but pulled away a couple inches to allow more air flow. I have 8 fans total. 3 radiator and 5 normal.
with a reg psu u could have put the cables in the front of the power supply ran them right to the managment channel and put an exhaust fan above the psu to pull some heat off the back of the motherboard. i tried that with this case and it works like a charm
Just a tip for screws. Why not using proper magnetic bit holders (and bits) from company like Wera? They magnets are so strong you will never drop screw no matter what you are doing... Simple and faster solution than always using screw holder...
Would love to see you do an ALL black stealthy ATX build (with minor complementary rgb) in the Lian Li o11 AIR MINI case. I'm kind of thinking about a build like this, since im having to move my setup to the living room, since i've just had a son who will be moving into my current office, to use as a bedroom. I'm also redoing my whole setup to be more of a minimal setup, with a 15,6'' portable monitor as my second display. Already bought another desk, that matches the tones more in the living room. (sorry for, if any grammar mistakes. English is not my first language)
im currently watching u on my intel celeron laptop haha u give me so much ideas for pc builds if i ever get the money im trying to save lol. Love your videos edgar please keep uploading :)
Love the build. Glad I can finally start watching your videos again especially after being in bootcamp. Gives me inspiration for my next build once I gather enough money or have a place to live by myself.
the cable of the aio coolercan can be put mid going to the right of the motherboard. it would be much cleaner can be on the same way with the 24 pin. it would be much cleaner.
My next build, just gonna buy a 15 gallon aquarium to build in, only need to add some cheap stamped steel trim and I'll have a case all the kids will want. 😂😮
No, its actually very bad for the AIO. The pump should always be below the top of the tubes. Otherwise air bubbles can travel up to your pump and ruin its life.
Very informative video, Lian Li did a great job with the case/AIO (program), great job on the build man, hope you're having a great week, great video....... 😎
i totally do that shit too with the screws and how many times i've lost the damn screw to the ssd thing. we both geeked out when it snapped into place lol
That's a very good build,,, I watched it fully and everyday you just give me new ideas,,, i currently don't have a pc but I'll surely get one for myself soon
Thank you for the video, this is what i neded. and ive decided, for my first gaming pc, im going to go with Liam-Li Fans/Cooling and their Case. this look very chill. except im going to go with the infinity fans. The GA II is awesome too. Im going to buy my new PC VERRRRRY soon! currently looking at the RTX 4070 Super.
A bit skeptical with the three way glass case, but this build slowly wining me over, was worried for the temps but its actually good, another dope build not gonna lie.... Would have loved to see the gpu in vertical mode but horizontal is also good.
that intro was crazy 😂 Edit: I do that with screws too sometimes, not even gonna lie
Год назад
If you lead those cables from CPU cooler to the side instead (below ram) then it won't be that visible as it will be mostly hidden by pipes and MB power cables. That will allow you to put motherboard down again and keep a good look.
i have a good suggestion i know your channel is based on tech but you like to game i think you should either make a gaming channel or just record on your main one i would love to see that😁
Maybe you change it before the video ends, but if you're going exhaust on the AIO on the vertical spot, why not make the rear fans intake as well. I get it they are higher, not lower. but wouldn't a cross breeze be better than negative pressure, no matter which direction it's pushing it. you'd match the flow of the other side of the case and create positive pressure.
Dude, you could have pulled the whole motherboard tray out with two screws instead of undoing 9. Also, when you moved the motherboard tray into the low position, you didn't add the extra grommets.
Like how you explain so much here 3:56 but end up still only putting one fan at the back, got me confused for a while. I think you can have 4 in (bottom and back) and 3 out
It's a shame you mounted the radiator flipped, the tubes at the top will give problems. Here's my major point for this good looking case, can you mount a liquid cooler so the tubes are at the bottom? The GPU seems to be in the way. Can you for instance go around the GPU, is the tube long enough or can you fit a 2 radiator at the rear with tubes at the bottom? Thank you for looking into this!
Damn another nice build and it would look good in white as well. I built my all white build with a gigabyte aero oc 4090/ 7800x3d/ 4 white sticks of 16 gigs of corsair vengeance ddr5 ram for a total of 64 gigs of ddr5 and the phanteks nv7 case. The pc is gorgeous and I cant wait to see how much of an improvement the 5090 and the next x3d amd chips are going to be once they release.
Thanx just came here to see how u a eatx looks on a vision. Have a msi meg ace coming and was scare it might be to big. Seeing this video seem it will just be fine fit
I'll probably be upgrading my case to this one shortly, but there is one thing I find odd about every review out there; Nobody has put 140mm fans in it. I can't find a single example. Did Lian Li stipulate that reviewers MUST use 120mm Lian Li Unifans in the reviews? Or did they provide them with the case for reviewers? For a decently priced Lian Li case, it stings knowing the Unifans cost more than the case itself (they're good fans, just expensive). I'll probably end up buying the case and putting the 140mm fans in there that I want, but I can't help but think Lian Li definitely had their requirements for the reviews. I would have loved to see someone at least try to put 3x 140mm fans in it
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
I feel homeless after watching this
Sweet build! Love the look of it and the differences from the O11D Evo
I feel so confident buying this case because of this video, very clear and in depth
Did you build it?
I have one and I highly recommend.
@@DJfireant789plusDoes it come with fans?
@scythe4648 Unfortunately no. You're gonna have to buy your own.
I don't have the money to build my own PC but just watching you build a gaming PC make me happy enough. It is my dream to have my own gaming PC setup
Hope you get one soon 🙏
You will get it oneday brother, do NOT give up on this dream! It will happen and be very worth it
I saved so much money on the widows operating system on my new PC build. You inspired me to build it myself and I just got everything activated and ready to go. Got the code within minutes. Thank you Ed, a man of the people
Epic build video!
I really enjoy black builds more than the white, so I appreciate you going black again
Ive been talking to my mom about your youtube channel and how your videos helped me build my first pc and uhhh.... This is the first video i watched with her and the intro was.... Something else
😂😂
You needa make another Black Friday deals video like last year
Yes, and fast. I just got another month's pay and it's shuddering with anticipation of which store it's gonna belong to next.
I’m sure he will. Not all companies have came out with their deals yet though
Its not black friday yet bro
I concur
@@ultramasterultra5724 In the EU it's not uncommon to have some bullshit called Black Week, or Black Month. It's bullshit, but it's the same shit.
Lian Li Hit it out the park again. Awesome build
Thank you for providing the chart at 15:14 , Very useful.
The wifey kiss was the best part of this video 😊
The challenge with fans in the bottom is the dust and/or the clearance for exhaust. Though many people place their computers on the desk or side table, there are still users that place them on a carpet surface and not think twice about that consequence.
Carpet is a killer … at least some hard base underneath the case …
Was that your sister
Wife😂
You did not lol..
Bro what the fuckkkkk
Sweet home Alabama
Wtf
Hey Edgar, your videos are awesome and super helpful, not only that they're entertaining also!
Thanks legend! wishing you all the best and keep up with the amazing content!
the glaze is crazy
Im looking to do my first build and fell inlove with this. just ordered everything. wish me luck.
have u built it yet bro? how is itt
I want an update
Was getting ready to watch someone else do a build with this case, then bam. My man comes through with the ménage à trois of cases. Great vid
13:21 i was one of those who comented about the fans and u replied to me😊🔥💪🏻
Sharp case from Lian Li. Loving all these new dual chamber options.
I got mine this month and it is incredible. I highly recommend it for those trying to make a beast of a PC.
How is the airflow for you? And how many Fans u got?
@chese-dr9sb Air flow is good. I have it in the corner of my room but pulled away a couple inches to allow more air flow. I have 8 fans total. 3 radiator and 5 normal.
Looks great! Just can't wait for the O11D Evo RGB.
15:13 killed me, wasn't expecting that 😂😂
having a regular O11 and built in it, one of the best looking PC cases and crazy easy to build in, the amount you can customize them too is crazy
with a reg psu u could have put the cables in the front of the power supply ran them right to the managment channel and put an exhaust fan above the psu to pull some heat off the back of the motherboard. i tried that with this case and it works like a charm
I can only imagine having such a beauty of a pc
Just a tip: Start those screws with your fingers or normal magnetic screwdriver to minimize the chance of cross threading or stripping the threads.
your the best pc builder i know keep up the good work god bless to you an your family
Love your videos man i been watching you for over 4 years now i remember when you visited my friend to give him a PC, Keep it up!
LOL love his excitement on the tool bit holder that has been around for like 20 years.
Those sliding holding bits have been around for like 20years or more. Handy little things.
positive pressure is GOOD. Less dust intake on non filtered entries.
Always been a dream of mine to build a custom PC , continuing to work hard! As for now i enjoy window shopping your channel 💪💪💪
I just finished my first pc build and it was the o11 vision! Amazing!! Thanks for the great info!
I would love to see your build!! I just did mine too last week
@@HannahVillarin-vf7rt I’ll post it up on my yt page.
How did you orient your fans? Did you do it the same as he did in the vid? I’m just worried there isn’t enough intake.
@@stank4950 how you did it?
best intro ever😍😍
In liquid cooling, smoother operation will be achieved if the pump is at the bottom and the radiator is at the top.
Whatching your vids just makes it's feels like a have a PC when ever am watching you I hallucinate bout what am Gon do with the PC when I get it 😂😂😂😂
Just a tip for screws. Why not using proper magnetic bit holders (and bits) from company like Wera? They magnets are so strong you will never drop screw no matter what you are doing... Simple and faster solution than always using screw holder...
Finally someone did the perfect fan orientation
1:45 best moment of the video no cap
Bruh
I would absolutely love to get this build done. looks like i need to save some pennies and start buying bit by bit
Would love to see you do an ALL black stealthy ATX build (with minor complementary rgb) in the Lian Li o11 AIR MINI case. I'm kind of thinking about a build like this, since im having to move my setup to the living room, since i've just had a son who will be moving into my current office, to use as a bedroom. I'm also redoing my whole setup to be more of a minimal setup, with a 15,6'' portable monitor as my second display. Already bought another desk, that matches the tones more in the living room. (sorry for, if any grammar mistakes. English is not my first language)
This is my dream case at this point
im currently watching u on my intel celeron laptop haha u give me so much ideas for pc builds if i ever get the money im trying to save lol. Love your videos edgar please keep uploading :)
Definitely came together in the end. Bravo!
Lian Li suggests 6 intake and 1 exhaust (or 2 exhaust if you use the lower setup)
Would it be possible to put an aio pump radiator at the back where you put the two fans??
I just got the same motherboard...The no screw, latch system is by far the coolest thing about this Mobo.
Ed really getting freaky with his builds now
Yo tech source I have really been needing a new set up because my current set up is only a Nintendo Switch.
I love your content btw🎉🎉🎉
Love the build. Glad I can finally start watching your videos again especially after being in bootcamp. Gives me inspiration for my next build once I gather enough money or have a place to live by myself.
I can’t wait for mine to arrive and rest of my pieces 7800x3d 7900xtx liability vision first full build no more shifty prebuilts gl me
1:50 bro was soo happy it was soo funny 😭😭😂😂😂😂
the cable of the aio coolercan can be put mid going to the right of the motherboard. it would be much cleaner can be on the same way with the 24 pin. it would be much cleaner.
My next build, just gonna buy a 15 gallon aquarium to build in, only need to add some cheap stamped steel trim and I'll have a case all the kids will want. 😂😮
why didn't you try 3 intake bottom 2 intake side 2 exhaust at the back and 1 exhaust top part of aio rad
i enjoy watching your videos and i really enjoy learning about computers. keep doing what your doing. your teaching young minds to do great things!!!!
i can only wish i had a build as clean as this
I do love dragon flutes!
Another amazing build great efforts Ed 🌹
Hmmm, I am not a pro, but shouldnt be AIO radiator other way around?(I mean hoses at botoom)
No, its actually very bad for the AIO. The pump should always be below the top of the tubes. Otherwise air bubbles can travel up to your pump and ruin its life.
@@roarbahamut9866as long as any part of the radiator is above the pump it will not get destroyed by air bubbles.
Very informative video, Lian Li did a great job with the case/AIO (program), great job on the build man, hope you're having a great week, great video....... 😎
i totally do that shit too with the screws and how many times i've lost the damn screw to the ssd thing. we both geeked out when it snapped into place lol
My favorite part in this video is the Motherboard❤
lian li seriously awesome with those face blow fan. that kinda fan design been delayed for too long
That's a very good build,,, I watched it fully and everyday you just give me new ideas,,, i currently don't have a pc but I'll surely get one for myself soon
aio should have hoses on bottom...keeps air out of aio...that way works to but not as good
I wish for Christmas all of us can get a powerful pc that can play any game or whatever you do
incredible job man as always!
Thank you for the video, this is what i neded. and ive decided, for my first gaming pc, im going to go with Liam-Li Fans/Cooling and their Case. this look very chill. except im going to go with the infinity fans. The GA II is awesome too. Im going to buy my new PC VERRRRRY soon! currently looking at the RTX 4070 Super.
A bit skeptical with the three way glass case, but this build slowly wining me over, was worried for the temps but its actually good, another dope build not gonna lie.... Would have loved to see the gpu in vertical mode but horizontal is also good.
Video idea: pc build only with parts that have Black Friday deals. Love your vids!
Sweeeet build thanks to you i bought the case and built a pc bec it looked soo good
I’m going to build my first pc soon and maybe i‘ll go with this case thank you for the vid
that intro was crazy 😂
Edit: I do that with screws too sometimes, not even gonna lie
If you lead those cables from CPU cooler to the side instead (below ram) then it won't be that visible as it will be mostly hidden by pipes and MB power cables. That will allow you to put motherboard down again and keep a good look.
let's go amazing build keep the videos coming.
i have a good suggestion i know your channel is based on tech but you like to game i think you should either make a gaming channel or just record on your main one i would love to see that😁
Maybe you change it before the video ends, but if you're going exhaust on the AIO on the vertical spot, why not make the rear fans intake as well. I get it they are higher, not lower. but wouldn't a cross breeze be better than negative pressure, no matter which direction it's pushing it. you'd match the flow of the other side of the case and create positive pressure.
Dude, you could have pulled the whole motherboard tray out with two screws instead of undoing 9.
Also, when you moved the motherboard tray into the low position, you didn't add the extra grommets.
imagine watercooling this case that would be🔥
Like how you explain so much here 3:56 but end up still only putting one fan at the back, got me confused for a while. I think you can have 4 in (bottom and back) and 3 out
This build is sick. I'm still a console caveman. But this gave me some good inspiration for my build!
That DeWalt bit is cool but you’re prone to strip your screws if you’re not careful.
Damn that's an amazing build. I'm excited to see more
Love it. Super clean
It's a shame you mounted the radiator flipped, the tubes at the top will give problems. Here's my major point for this good looking case, can you mount a liquid cooler so the tubes are at the bottom? The GPU seems to be in the way. Can you for instance go around the GPU, is the tube long enough or can you fit a 2 radiator at the rear with tubes at the bottom? Thank you for looking into this!
Tubes at the top last 3+ yrs. No issues...🤷🏽♂️
@roelgarcia2894 sound issues I mean
I like the nzxt h9 flow more because you can have better airflow
Damn another nice build and it would look good in white as well. I built my all white build with a gigabyte aero oc 4090/ 7800x3d/ 4 white sticks of 16 gigs of corsair vengeance ddr5 ram for a total of 64 gigs of ddr5 and the phanteks nv7 case. The pc is gorgeous and I cant wait to see how much of an improvement the 5090 and the next x3d amd chips are going to be once they release.
I’m building a Ryzen 9 5900x build I know it’s kinda old at this point but it’s more affordable now and still a beast
Nah Edgar your a freak with these intros my man love your videos keep making awesome content 😂
Thanx just came here to see how u a eatx looks on a vision. Have a msi meg ace coming and was scare it might be to big. Seeing this video seem it will just be fine fit
I would love a pc build by you! How would I go about this process? I really need an upgrade!
Ed is stuffing it into our faces that he´s happily married AND has a 4090 T.T bro have some mercy please.
Many were happily married till they purchased the 4090! 😂
I just love how we can hear that you almost couldn't stop yourself from laughing at the "faces blow" bit lol
I really think back connector mbs are the future.
Bro I literally started crying the way this PC is a beauty
I'll probably be upgrading my case to this one shortly, but there is one thing I find odd about every review out there; Nobody has put 140mm fans in it. I can't find a single example.
Did Lian Li stipulate that reviewers MUST use 120mm Lian Li Unifans in the reviews? Or did they provide them with the case for reviewers? For a decently priced Lian Li case, it stings knowing the Unifans cost more than the case itself (they're good fans, just expensive). I'll probably end up buying the case and putting the 140mm fans in there that I want, but I can't help but think Lian Li definitely had their requirements for the reviews. I would have loved to see someone at least try to put 3x 140mm fans in it
That's a beautiful build...
I’m buying in this case, about the radiator do I do push pull configuration or what directions does the fan have to be in😊😊
shouldn't your AIO technically be flipped to avoid air bubble building up getting sucked into the pump?
6:41 that smile was terrifying 😂
I'm building a nearly 3k system over the weekend with the O11 Dynamics XL with my son. Same AIO.