So the issue I have is two lights on my garage hooked up to one light switch. I can get garage 1 light to work but can't get garage 2 light to get the wifi signal. I can get it to flash fast by unscrewing it by hand 3 times and wait for it to load but just get a failed message? There is different options light single light or string lights. Tried both but no go. Any suggestions?
hold on, does the light require the wall switch or does the bulb have wifi capability without being on the required wall switch? My Vivitar bulb will not connect to the wifi. The app connects but bulb will not
Hi, any idea on how smart lights get paired without connecting to them via Wi-Fi or Bluetooth during initial installation? How does your phone find them?
So if you turn the bulb OFF from the wall switch it no longer works at all or just loses programmed features? Very helpful video, makes clear there is a problem with control from wall switch.
It will no longer work since it’s already physically cutoff from power. When you turn the wall switch back on, it may take a few seconds for the smart bulb to connect to wifi before you can use the smart features on the phone again
@@cayetanojed Thank you very much for your reply. I hoped it would be functional without connection to wi-fi. Basically I am looking for a bulb that could be programmed with a phone and stay programmed and operational at specified parameters (colors) while turning ON/OFF from wall switch.
@@sezwo5774In that case you may need to look into zigbee type of devices which don’t require WIFI.. Also, if you still want to have a wall switch that controls the bulb to turn it on or off, you’ll need a smart wall switch, I also have a video for it, and in your case you’ll need to set up the smart wall switch to remotely control the smart bulb.
I bought it from a local hardware store. I think it was Ace Hardware. You may also find it online in Amazon, or any online stores available in you region. They are fairly cheap
A few things: - make sure you are trying to connect via 2.4Ghz WiFi, with correct username and password of course - your mobile device is on 2.4GHz WiFi as well - you don’t have too may devices connecting to your router Other than that, check with your seller for replacement options if you got a faulty unit.
Hello, sorry for the very late reply. Usually pairing mode should be a continuous blinking until pairing is complete. In your case, you may not have the same exact bulb that I have(I have a Tuya powered one) so it may have different pairing requirements. Please check the user manual. Otherwise, I’d recommend you reach out to the seller where you got your item from.
Hi. Let's say this bulb is 12Watt so the brightness of 12watt equal to level 100% right?. if the brightness set at 50% does this mean it's become 6Watt?
Hello, great question! I recall connecting it to a watt meter at one point before and tried bringing the brightness down and it did change the power consumption level down, too. However, I am not sure if putting it to 50% brightness brings the wattage down to half. There are other component still at work so most like it may still be more than 6.
@@cayetanojed hey. I already tested using smart plug that can read the output details. I can confirm that if we reduce the brightness by 50%, wattage also will automatically reduce to 50%.
After replacing the original bulb with the new smart bulb, the bulb doesn't blink. I can't pair it with app. Is there a way to troubleshoot it? Thank you 😊
For most tuya smart bulbs, you’ll need to turn the switch on and off like 3 times, or until the bulb blinks rapidly. When it starts blinking, it is now in pairing mode, you can then go to the app to pair it. You can also check the instruction manual that comes with the bulb for more details.
@@cayetanojed thanks . so on google assistant we can only control the light on/off but can color changing and dimming can it be done as well or you need that smart app
In most cases, you’ll need to turn the physical wall switch on and off 3 consecutive times. Otherwise, you’ll have to check the user manual for the setup instructions or consult your vendor about it.
Unfortunately, this item only works with WiFi 2.4GHz. You’ll need to check for other smart devices that work with Bluetooth or WiFi 5GHz. Be sure to check the specs first and ask the store for the right specs for your requirements. Also check if they provide a return policy in case the item you got is not compatible with your home network. Good luck!
@@cayetanojed hi im crying the bulb does not connec and i dont know what im doing wrong , should i also turn off my internest router and reconnect it while im setting the bulb??
You may want to check the instruction manual that came with the device. Or, contact the store/company where you bought the device, they should be able to help you out with any issues related to the operation of the device.
Sorry to hear that. Please check the included user guide on how to properly use your device. The one that I got may be different from the one you purchased. You may also want to reach out to the seller or store where you got the item and check for warranty coverage or replacement options. Best of luck!
Thank you for taking time to comment, and I’m sorry if I can’t respond appropriately because I don’t understand your comment. I don’t trust Google translate either.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Jed, Thank you for this video. You made it very simple to understand. You would make a great teacher. Thanks Paul 🇺🇸
I appreciate the feedback, Paul @Radiotron47. Thank you very much!
How do you put it on pairing won’t, if it does not flash on the beginning ?
This was hard to install at first 😅 but I finally got it working and love the colors. ❤
Glad to hear that!
@@cayetanojed ❤️
I really wish someone would do a video or explain how to manually connect to a smart light with no wifi
Same
So the issue I have is two lights on my garage hooked up to one light switch. I can get garage 1 light to work but can't get garage 2 light to get the wifi signal. I can get it to flash fast by unscrewing it by hand 3 times and wait for it to load but just get a failed message? There is different options light single light or string lights. Tried both but no go. Any suggestions?
hold on, does the light require the wall switch or does the bulb have wifi capability without being on the required wall switch? My Vivitar bulb will not connect to the wifi. The app connects but bulb will not
hello, you’ll need to have the wall switch in the ON position so that you can control the bulb via WiFi.
Ohmygoodness thanks!! I couldn't figure out how to get it to connect 😂 your video helped a bunch!!
You're welcome!
what did you select as product type under add device?
Hi, any idea on how smart lights get paired without connecting to them via Wi-Fi or Bluetooth during initial installation? How does your phone find them?
That is a really good question.
Got the answer. It's through UDP packets. It's mentioned in Tuya documents.
@@n-p2048what does that mean lol
After "Lighting" on what device do you tap?
Light Source (Wi-FI)
@@cayetanojed thanks
So if you turn the bulb OFF from the wall switch it no longer works at all or just loses programmed features? Very helpful video, makes clear there is a problem with control from wall switch.
It will no longer work since it’s already physically cutoff from power. When you turn the wall switch back on, it may take a few seconds for the smart bulb to connect to wifi before you can use the smart features on the phone again
@@cayetanojed Thank you very much for your reply. I hoped it would be functional without connection to wi-fi. Basically I am looking for a bulb that could be programmed with a phone and stay programmed and operational at specified parameters (colors) while turning ON/OFF from wall switch.
@@sezwo5774In that case you may need to look into zigbee type of devices which don’t require WIFI.. Also, if you still want to have a wall switch that controls the bulb to turn it on or off, you’ll need a smart wall switch, I also have a video for it, and in your case you’ll need to set up the smart wall switch to remotely control the smart bulb.
@@cayetanojed Does it consume electricity whether is on or off
Hi, where did you get the light switch cover? The one shown at 1:43 in this video? Thanks.
I bought it from a local hardware store. I think it was Ace Hardware. You may also find it online in Amazon, or any online stores available in you region. They are fairly cheap
@@cayetanojed you wouldn't believe it but I have found it hard to find something similar in Amazon. Thanks for the info.
You explain perfect 👌, Thank you
Thank you!
That was the same exact light bulb u replaced 😂 good shit 👍
they look pretty similar 👍
it doesn’t work for me :( it says connecting to device and then it fails
A few things:
- make sure you are trying to connect via 2.4Ghz WiFi, with correct username and password of course
- your mobile device is on 2.4GHz WiFi as well
- you don’t have too may devices connecting to your router
Other than that, check with your seller for replacement options if you got a faulty unit.
Ok. I dont have wifi in my house ...should i turn on my phones hotspot as well as Bluetooth??
Hello. I’m sorry but you will need to have WiFi in your house to properly use it as a smart bulb.
thanks a lot.
My light will only blink only 2 times won’t go into paring mode
Hello, sorry for the very late reply. Usually pairing mode should be a continuous blinking until pairing is complete. In your case, you may not have the same exact bulb that I have(I have a Tuya powered one) so it may have different pairing requirements. Please check the user manual. Otherwise, I’d recommend you reach out to the seller where you got your item from.
Nice thanks. Can i switxh it on or off via phone when away from home too??
Hello, I don’t think that’s a supported feature
Nice tutorial maybe i use it to my smart bulb lights fory room
Awesome! Thank you
Hi. Let's say this bulb is 12Watt so the brightness of 12watt equal to level 100% right?. if the brightness set at 50% does this mean it's become 6Watt?
Hello, great question! I recall connecting it to a watt meter at one point before and tried bringing the brightness down and it did change the power consumption level down, too. However, I am not sure if putting it to 50% brightness brings the wattage down to half. There are other component still at work so most like it may still be more than 6.
@@cayetanojed hey. I already tested using smart plug that can read the output details. I can confirm that if we reduce the brightness by 50%, wattage also will automatically reduce to 50%.
2024 who’s here
What a weirdo you are
Me
After replacing the original bulb with the new smart bulb, the bulb doesn't blink. I can't pair it with app. Is there a way to troubleshoot it? Thank you 😊
For most tuya smart bulbs, you’ll need to turn the switch on and off like 3 times, or until the bulb blinks rapidly. When it starts blinking, it is now in pairing mode, you can then go to the app to pair it. You can also check the instruction manual that comes with the bulb for more details.
I tried it several times. I searched YT Tutorials until I ended on this video. Maybe the bulb is defective. Thanks by the way. 😊
Does it support google assistant?
yes, it does
@@cayetanojed thanks .
so on google assistant we can only control the light on/off but can color changing and dimming can it be done as well or you need that smart app
thank you for the knowledgeable session
Always welcome
Why isn’t mines flashing am I doing it wrong or something?
In most cases, you’ll need to turn the physical wall switch on and off 3 consecutive times. Otherwise, you’ll have to check the user manual for the setup instructions or consult your vendor about it.
Thanks ,but I use only wifi 5ghz..there is any way to connect only via Bluetooth?
Unfortunately, this item only works with WiFi 2.4GHz. You’ll need to check for other smart devices that work with Bluetooth or WiFi 5GHz. Be sure to check the specs first and ask the store for the right specs for your requirements. Also check if they provide a return policy in case the item you got is not compatible with your home network. Good luck!
Do you need to register on icloud???
Hello. nope not necessarily iCloud, but you will need to sign up for an account in the Smart Home App to be able to control the devices via internet.
@@cayetanojed hi im crying the bulb does not connec and i dont know what im doing wrong , should i also turn off my internest router and reconnect it while im setting the bulb??
Hey u did a awesome job
Thank you!
But it's not blinking, I've tried everything.
You may want to check the instruction manual that came with the device. Or, contact the store/company where you bought the device, they should be able to help you out with any issues related to the operation of the device.
Same problem
The light does not work at all. I think the problem is with my light
Sorry to hear that. Please check the included user guide on how to properly use your device. The one that I got may be different from the one you purchased. You may also want to reach out to the seller or store where you got the item and check for warranty coverage or replacement options. Best of luck!
2024
أهلاً وسهلاً ومرحباً بك-يتعذر التعليق-لا أعلم .
Thank you for taking time to comment, and I’m sorry if I can’t respond appropriately because I don’t understand your comment. I don’t trust Google translate either.
Me