My Warrior engine went to pieces
HTML-код
- Опубликовано: 26 авг 2024
- It looks like the weakest IRAN link is my cylinders, which have extensive external corrosion.
As it is disassembled, the parts of my Lycoming O-320 engine are visually inspected. Any with obvious defects are sent them to the various specialty shops that fix those parts.
The parts that pass the preliminary inspection are cleaned down to the metal and inspected with methods that uncover defects that are invisible to the naked eye.
Funny how that engine looks so good after sitting outside for a long time. I guess you never know, you should have a good airplane after this. Fly it and enjoy it 👍
Lucky you. I don't skimp either. It's cheaper to treat a motor right.
The internal combustion engine: friction leads to metal fatigue.
Wishing you a happy New year Dave and thanking you for your channel.
🌏🇭🇲
Thought I heard on AOPA's podcast with Mike Busch "Ask the A&Ps" that if there's an issue with a camshaft, to not work it, but to replace it.
Thanks man, good job.
I'm guessing that camshaft inside of airplanes are different than the ones in cars, I know that from building and racing small block Chevys years ago that once your lifter has worn out it would also take out the lobe on the cam and then you just have to destroy the whole thing, I'm guessing this is different with airplanes, they were talking about putting a polish on your current camshaft. Maybe when you speak with him in the future you can get them to comment further on these things
I'll ask. I recall Mike Busch (the maintenance guru) stating that the cam lobes are a harder metal than the lifters but I don't recall why that is. Eventually though, it's as you said, both of them would be wrecked.
More video like this as a person who is entering into the A&P field?
Pilots and mechanics point of view is always welcomed.
If CSI welded in the webbs they did not follow Lycoming Engines criteria.
mine is 0-320-d3g .is there any workshop that i can attend so i can overhaul my engine and thereafter getting certificate to do back home in KL,Malaysia? thx
Engines don’t do well sitting around when I was doing charter most of the piston aeroplanes I flew made TBO but they flew every day.
What bothers me the most when I see the various friction issues in your engine and in every body else’s is that there is at least one lubrication product in the marketplace which can greatly minimize that wear. Why you haven’t seen it is simply because the FAA requires a company to fork out a minimum of $ 75,000 to have it tested even though the product has been used by top fuel dragsters since the mid 1980’s. Doesn’t that seem like a plan to take pilot’s out of operation?
For recip aircraft engines the problem is corrosion. How does friction relate in terms of the mystery product?
So, you want an airplane. Feel lucky, punk?