Thanks for watching and liking this video! For everyone upgrading to LEDs: don't forget to get bigger dust caps to prevent overheating. I used the originals for a while but recently changed to caps that provide more room behind the bulbs to cool down. Cheers.
The trick is to put the "blue" thing on the adapter and then insert the adapter (without the rest of the LED). After you lock the adapter you simply insert the LED and lock it as you did. Try it next time, I've done it on my mito without removing the headlights in just a few minutes.
And I used led lights 4 my number plates. And its looks super bright. Day lights didn't work whit less cause I was getting a problem whit computer and the LEDs will go off after 3 seconds. So that I need to fix.
Hi @ItsAboutCars , I had a massive issue when replace3d the day-time running lighs ( minimums) by blue lights. The Orange of the indicator melt with the temperature, with the 7W bulbs, someone recomended me not to use higher than 5W later.
I just got me a 2009 Mito but i would ;like to get me some LED light white to blue look. Can anyone tell me which one should I get, make and model please, Thanks mate..
What are you doing man? you have to remove the dust cap because the LED lights you have installed need a lot of air to cool off for this have a fan on the back, putting the dust cap will cover the fan by burning your new lights😉
@@itsaboutcarsyt do not remove the caps. Buy led caps with more room for airflow. If you remove your caps you will suck dust in resulting that you have to clean your projectors lenses etc.
@@itsaboutcarsyt it gets realllyy hot so i made a hole the exact size of the fan this is a temporary solution cause i ordered longer dust cap so it has room to cool.
ItsAboutCars I just bought MiTo 2 months ago and I am looking for new lights now too. I installed philips racing vision but they are just not so good for me as I travel early in the morning. Can you send me the link where you bought this set? Thanks
I have never seen anyone removing the whole headlight, just to replace a bulb, am I missing something ?🤔 Does the adapter come with the LED kit? Cheers.
What I need for your light setup can you link all articles in a comment please? Greetings Was braucht man alles für den Umbau? Könntest du einmal alle Artikel in einem Kommentar verlinken? Liebe Grüße
Leider gibt es das ganze so nicht mehr auf Amazon... Ich hab schonmal die Frage beantworten wollen und konnte nur die Adapter finden, aber nicht die LEDs dazu. Vielleicht gibt es neuere Versionen mittlerweile
Thanks for watching and liking this video!
For everyone upgrading to LEDs: don't forget to get bigger dust caps to prevent overheating. I used the originals for a while but recently changed to caps that provide more room behind the bulbs to cool down.
Cheers.
under SOCIAL/ Music etc., it would be great if you could share the links to purchase the LEDs and adapter. Cheers
@@rvcasa problem is that the LEDs i used are no konger available so i can't provide any links
You can turn the Day Lights of boss! Go through the settings on the display and you'll find it. Goodluck!
The trick is to put the "blue" thing on the adapter and then insert the adapter (without the rest of the LED). After you lock the adapter you simply insert the LED and lock it as you did.
Try it next time, I've done it on my mito without removing the headlights in just a few minutes.
Thanks for the tip!
Loving it. Please show a vid of how to change the sound system on the Mito
Definitely a thing to think about, because the bass isn't the best in the current system
how did you fix the bumper gaps :)
This is possible without removing the bumper dude 😎 bud great video man.
Yeah if I only knew before haha 😅
@@itsaboutcarsyt 😂 keep up the good work, still great video
How? Sorry- bit late to the party!
@@finleyclark2853 🤣
And I used led lights 4 my number plates. And its looks super bright. Day lights didn't work whit less cause I was getting a problem whit computer and the LEDs will go off after 3 seconds. So that I need to fix.
Which brand / model is your new daylight ? Excelent video man. Thanks for sharing your experience!
Id like to know this as well :)
Did somebody also changed the little light also?
Well done 🥇, beauty car alfa mito 🔝
you can get LED number plate lights on ebay. perfeect for what you want and i have them too
Thanks!
Hi @ItsAboutCars , I had a massive issue when replace3d the day-time running lighs ( minimums) by blue lights. The Orange of the indicator melt with the temperature, with the 7W bulbs, someone recomended me not to use higher than 5W later.
Hey, thats too bad to hear! Of course you have to use compatible bulbs, the blue daytimes i used are 5w, not 7w like yours.
I just got me a 2009 Mito but i would ;like to get me some LED light white to blue look. Can anyone tell me which one should I get, make and model please, Thanks mate..
Idk if you have one already but I’ve just ordered the Winpower H7 70W one
Hi, were did you bought the adaptar. Thank you. Nice video by the way
Bought it together with the lights at Amazon I believe. Thanks btw!
What Type of MiTo is yours? Mine is the 155bhp Veloce 2009 version but it's been remapped to 230bhp.
It’s a Quadrifoglio Verde
What 230!!! Any issues with this?
Dude wont reply because his car blew up because of all the bhp
230HP? No way!
I cannot even get my QV to 215HP (w/ a stage 1)...
Hat die Led Birne ein EU Zeichen?
Where can I find the black adapter to insert the led? You said you had to buy it separately
I have the led lights but I need that adapter
Usually don't do links but here you go
www.amazon.de/dp/B071VLQ8ST/ref=cm_sw_r_cp_apa_fabc_TiDQFbGG9SNBV?_encoding=UTF8&psc=1
you have to remove only battery
What are you doing man? you have to remove the dust cap because the LED lights you have installed need a lot of air to cool off for this have a fan on the back, putting the dust cap will cover the fan by burning your new lights😉
Never thought about that tbh, guess you're right haha
I wanted to give you this indication to help you, thanks for the reply
Always appreciate comments like this, since I am no mechanic and therefore probably will keep doing mistakes in the future
@@itsaboutcarsyt do not remove the caps. Buy led caps with more room for airflow. If you remove your caps you will suck dust in resulting that you have to clean your projectors lenses etc.
@@martijngelling7189 also very helpful, thank you. Let's hope there is suitable dustcaps for the MiTo.
Did you get any errors with led lights?
So far no errors, still running with bigger dust caps
@@itsaboutcarsyt what do you mean bigger dustcovers?
Do you mean deeper? Because if they're wider they won't stay on! Cheers
@@rvcasa more air volume but of course fitting in diameter
@@itsaboutcarsyt I really don't understand "air volume"...🤔
@@rvcasa deeper like you said
Great Video. Have you had any issues with over heating using the original dust cap?
Don't think so, but I actually never checked
@@itsaboutcarsyt it gets realllyy hot so i made a hole the exact size of the fan this is a temporary solution cause i ordered longer dust cap so it has room to cool.
I have bigger dustcaps now, they seem to work fine 👍🏼
What about taking out the battery to reach the bulbs genius?
Actually you don't really have to remove anything at all, to remove/replace the original bulbs.
Are the led lights legal in Germany?
Probably not if you ask officials. But it looks like it's oem if your car has a lense like the MiTo. Never had any troubles with TÜV
ItsAboutCars I just bought MiTo 2 months ago and I am looking for new lights now too. I installed philips racing vision but they are just not so good for me as I travel early in the morning. Can you send me the link where you bought this set? Thanks
Great!
Kommst du aus Bad Homburg oder so? 😅 würd das gern bei meinem mito auch machen, nur bekomme die Front vorne nicht ab..
die front muss dafür auch nicht ab
I have never seen anyone removing the whole headlight, just to replace a bulb, am I missing something ?🤔
Does the adapter come with the LED kit? Cheers.
In my cuntry this is inlegal... :(
What I need for your light setup can you link all articles in a comment please?
Greetings
Was braucht man alles für den Umbau? Könntest du einmal alle Artikel in einem Kommentar verlinken?
Liebe Grüße
Leider gibt es das ganze so nicht mehr auf Amazon... Ich hab schonmal die Frage beantworten wollen und konnte nur die Adapter finden, aber nicht die LEDs dazu. Vielleicht gibt es neuere Versionen mittlerweile
@@itsaboutcarsyt english..?:))))
shit not leds