FAQ- DEH-7300BT- Audio Settings

Поделиться
HTML-код
  • Опубликовано: 3 фев 2025

Комментарии • 8

  • @stevencreiter1227
    @stevencreiter1227 4 года назад

    Easy for an expert to do. I got mine in a used truck. Sounds and works ok as far as I can figure, where may I get the manual?

    • @deckerdotto6035
      @deckerdotto6035 4 года назад

      The Pioneer DEH-7300BT was manufactured back in 2010-2011. You can find more videos about Pioneer DEH-7300BT here: ruclips.net/video/cpeSXKCNmRY/видео.html and here: ruclips.net/video/kJt9-cgfdBQ/видео.html You can find the owner's manual for the Pioneer DEH-7300BT here: www.pioneerelectronics.com/PUSA/Car/CD-Receivers/DEH-7300BT#manuals and you can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics

  • @leebodean1493
    @leebodean1493 2 года назад

    How do I turn off the subwoofer and get the fade function back?

    • @pioneerelectronics
      @pioneerelectronics  2 года назад +1

      What is the model number of your Pioneer in-dash receiver? Depending upon the receiver model, you may need to switch the Rear Speaker Output to Full Range in the Initial Setup. If you have the Pioneer DEH-7300BT, you can learn about it in this Pioneer How To video: ruclips.net/video/cpeSXKCNmRY/видео.html
      If you have a more modern Pioneer receiver, you can learn about it in this How To video from Pioneer: ruclips.net/video/4xf-rc9IEok/видео.html
      You can find more videos on Pioneer's RUclips Channel here: ruclips.net/user/pioneerelectronics

  • @JoleneHerndon
    @JoleneHerndon 3 месяца назад

    How do u cut the power off so it doesn't kill my battery

    • @pioneerelectronics
      @pioneerelectronics  3 месяца назад

      The red wire should go to ignition power. 12 volts when the car is on, zero volts when the car is off. The yellow wire goes to a constant 12 volts, to retain the memory.

  • @naeemullah5277
    @naeemullah5277 2 года назад

    When my mobile is connected to bluetooth i can hear the call but it’s not working on music why???

    • @pioneerelectronics
      @pioneerelectronics  2 года назад

      What is the model number of your Pioneer in-dash receiver? Most modern Pioneer receivers with Bluetooth work with streaming audio. After your phone is connected, play some music on your phone and set the phone's volume level to ~50%. Next, press the receiver's SRC button to choose the BT Audio Source.
      You can see it demonstrated in this How To video from Pioneer: ruclips.net/video/Quq2R6PH5yw/видео.html
      You can find more videos on Pioneer's RUclips Channel here: www.youtube.com/@pioneerelectronics