I think what I appreciate most about this video is the TITLE. "Here's the conclusion. Watch for details if you want, but no teasers, no begging for subs / likes / comments, just facts." Poster respects my time by telling me what I need to know UP FRONT and then shows his work.
Yes. Thanks for asking. We have had outside for over 25 years now. The only species that stood the test of time were the Mataverde Ipe and the A grade heartwood Redwood. The redwood looks like it it's nearing the end of its life cycle. The Ipe looks like it could go on for decades. We'll do a follow up video in the near future.
That's awesome, Harley! Great job. Maintenance matters. Many people don't want to go through the effort, and for them, a long lasting hardwood decking species works great.
thats understandable. it IS the alpha of the group however it's important to also be cognizant of the disastrous environmental consequences of harvesting this species.
@@MOUTHonesixtyseven Thank you, Jake. As you know there are always two sides to every story. Mataverde Ipe is harvested by sustained yield harvesting practices in legally permitted parcels where regrowth happens naturally. Here's some great information that may be helpful for a fuller understanding: www.mataverdedecking.com/environment
Thank you, Matt. FYI, 9 years later nearly everything has rotted out except the Ipe, it has weathered to a gray patina and is in excellent shape. The A grade CVG Redwood decking came in second place.
That's a great question Brent. Although Ipe hardwood is the 'gold standard' for exterior decking and lumber, there are many other high-density hardwoods that perform exceptionally well, too. Cumaru and Garapa hardwood from Brazil are two excellent species. Machiche hardwood from Guatemala is another. Mataverde offers a 25 year limited warranty on all of these hardwood species. Thank you.
All of the species were end sealed with Anchor Seal immediately after cutting. This helps minimize end checking. None of the wood species were pre-finished for this long-term test. www.mataverdedecking.com/care-and-maintenance
I use ipe seal on the end grain of any cut. It's a white waxy emulsion same stuff that's on the end grain of the boards when they are delivered. Goes on like a white wax dries clear. Take a new boards and scrape the end grain with a fingernail and you'll probably have some under your nail.
@@oldporkchops I can't say for sure but the ipe seal seems to be both topical and absorbed. I would lean towards not using it on a cutting board as I'm not sure it's a food safe product.
@@MOUTHonesixtyseven Great question, Jake. With softwoods like fir or cedar, regular refinishing means, whenever the wood starts to turn gray, a new sealer coat should be applied. With high density hardwoods like Ipe, the gray color does not affect the wood's performance. I hope this is helpful. Here's a short article: www.mataverdedecking.com/blog/hardwood-decking-weathers-gray-for-a-great-low-maintenance-deck
We continue to test many finishes for Ipe decking. We found Penofin Hardwood Formula works best. That said, it usually requires a re-coat every year or two.
Thanks KO, Yes, Ipe hardwood decking is more expensive than most other real wood decking options - upfront. Over the course of time, though, Ipe is one of the lowest cost decking options over the entire life cycle of your deck. Here's a link to more information on deck pricing: www.mataverdedecking.com/compare-woods/price-comparison . I hope this is helpful. Thank you!
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
I think what I appreciate most about this video is the TITLE. "Here's the conclusion. Watch for details if you want, but no teasers, no begging for subs / likes / comments, just facts." Poster respects my time by telling me what I need to know UP FRONT and then shows his work.
Thank you for your comments.
Have you kept the ipe outside since you posted this video? I would love to see how it’s held up
Yes. Thanks for asking. We have had outside for over 25 years now. The only species that stood the test of time were the Mataverde Ipe and the A grade heartwood Redwood. The redwood looks like it it's nearing the end of its life cycle. The Ipe looks like it could go on for decades. We'll do a follow up video in the near future.
Id like to see an update for 2020!
Thank you, Will. We're on it!
kept my cedar deck oiled, it lasted 32 years, think that's pretty good.
That's awesome, Harley! Great job. Maintenance matters. Many people don't want to go through the effort, and for them, a long lasting hardwood decking species works great.
Great, video and after 9 years of this being posted, ill be going with the ipe.
thats understandable. it IS the alpha of the group however it's important to also be cognizant of the disastrous environmental consequences of harvesting this species.
@@MOUTHonesixtyseven Thank you, Jake. As you know there are always two sides to every story. Mataverde Ipe is harvested by sustained yield harvesting practices in legally permitted parcels where regrowth happens naturally. Here's some great information that may be helpful for a fuller understanding: www.mataverdedecking.com/environment
Thank you, Matt. FYI, 9 years later nearly everything has rotted out except the Ipe, it has weathered to a gray patina and is in excellent shape. The A grade CVG Redwood decking came in second place.
I know ipe is the most popular but I’m curious how its durability compares to its less expensive tropical cousins.
That's a great question Brent. Although Ipe hardwood is the 'gold standard' for exterior decking and lumber, there are many other high-density hardwoods that perform exceptionally well, too. Cumaru and Garapa hardwood from Brazil are two excellent species. Machiche hardwood from Guatemala is another. Mataverde offers a 25 year limited warranty on all of these hardwood species. Thank you.
Great video! Was the Ipe oiled/waxed at the end grain? I heard that Ipe needs a special wax/oil after it is rip cut?
All of the species were end sealed with Anchor Seal immediately after cutting. This helps minimize end checking. None of the wood species were pre-finished for this long-term test. www.mataverdedecking.com/care-and-maintenance
@@5ccnolan I appreciate your time taken to reply. This is helpful.
I use ipe seal on the end grain of any cut. It's a white waxy emulsion same stuff that's on the end grain of the boards when they are delivered. Goes on like a white wax dries clear. Take a new boards and scrape the end grain with a fingernail and you'll probably have some under your nail.
@@10p56 Thanks. This helps. Would you apply the same Ipe seal for the end grain of Ipe cutting boards too?
@@oldporkchops I can't say for sure but the ipe seal seems to be both topical and absorbed. I would lean towards not using it on a cutting board as I'm not sure it's a food safe product.
Would like to see how maintained vertical grain fir looks after 15 years
Hi Patrick, if vertical grain Douglas Fir is re-stained and refinished on a regular basis, it will last longer and look better.
@@MataverdeDeckingandSiding Curios how often is a regular basis? Saying the porch is covered, w/ typical wear and tear. Thanks!
@@MOUTHonesixtyseven Great question, Jake. With softwoods like fir or cedar, regular refinishing means, whenever the wood starts to turn gray, a new sealer coat should be applied. With high density hardwoods like Ipe, the gray color does not affect the wood's performance. I hope this is helpful. Here's a short article: www.mataverdedecking.com/blog/hardwood-decking-weathers-gray-for-a-great-low-maintenance-deck
How can Ipe's natural brown color be preserved easily over time?
We continue to test many finishes for Ipe decking. We found Penofin Hardwood Formula works best. That said, it usually requires a re-coat every year or two.
@@5ccnolan Good info to know. Thanks.
Was the southern yellow pine pressure treated?
Hi Kevin, yes the pine was pressure treated
Would hope Ipe is best considering it’s high price.
Thanks KO,
Yes, Ipe hardwood decking is more expensive than most other real wood decking options - upfront. Over the course of time, though, Ipe is one of the lowest cost decking options over the entire life cycle of your deck. Here's a link to more information on deck pricing: www.mataverdedecking.com/compare-woods/price-comparison . I hope this is helpful.
Thank you!
Aug 2021 update