@@christopherwebb3517 Depends on how many people are on the list, check the end of the video, it's usually 20 bikes per video. For me it took a little over a month.
@smultron3030 around 60-100km depending on the level of assist. There's no proper torque sensing, but there is a mode that feels like there is, but the motor just tries to match your speed.
20:32 So many drinks on my Indie 3. Those bars were rotated pretty far forward and 5 degree back sweep only. Took over a month to get the back wheel spaced and stable so the thing wouldn't rub. DT spokes cut 24 in total. I actually tried a suntour suspension fork and as well the Surly fork.. 23:02. 🍻 yeah my guy slides I got to ride the step-thru like a true slacker. Hakan bike with the no sand. 😅😅
Thanks for the review Gary - that old racer of my dad's probably should have gone in the skip, but I guess it shows that you cant keep a good bike down 😂 Gareth
Gareth did a great job of restoring his dad's old 5 speed bike. Reminiscent of my old Sun 5 speed. I know I keep saying this, but the restoration of these beautiful old frames / bikes and put to use is fantastic. Oi! Oliver, chuck it in my skip mate 😂
Cold blooded Gary. But fair. That S-Works is a bit of a wreck when you get close up enough. And I'd completely failed to notice that M910 rear mech! They were cosmetically very similar but mechanically very different, but how did I not pay attention to that phat parallelogram spring?
I got the exact same specialized sworks 94' frame, in that same color, same saddle post, same Ti stem, but with nice 1.5 ritchey slick road tires. Under 10kg. Got it on an awesome deal. Just needed rear deraileur hanger and deraileur (bought the exact same old one from factory), swapped front forks for a rigid one and a decent saddle. Very stupidely, i modded the stock front canti brake hanger, when it still had the weirdo suspension shock (canti did not work as it was incorrectly mounted). Now has a tilng TEKTRO?/NOS? cantilever brake hanger that works on the lower fork mount. Got to solve a loose lower head set bearing race (the one from the fork), don't know why it was ok on the idiot shock but loose on the rigid fork.
29:10 Is it really useful to convert MTB (I guess) into single speed with these semi-vertical dropouts? I mean it’s not a fixed gear and chain tension is not relevant and I think clearance is ok, but anyway (sorry, I am new here) Also thank you for your content, it’s actually very useful
@@Nkellllll1 you can run a chain tensioner to help tension the chain, some ppl like to convert to single speed for simplicity , but yeah up to the rider. Cheers mate !
My 2006/07 Trek 4300 6061 aluminum "wishbone" frame has M739 XT V-brake levers, M760 XT V-brakes👍👍, an XT M770 HollowTek 2 crank🤘🤘,an M772 XT Shadow rear derailer 🤘🤘, XT 760 front dereailer 👍👍, M772 XT Rapid F!re+ shifters🤘🤘with a 9spd. M970 XTR cassette 🤘🤘. 7075 TITEC H*llbent riser bars, 7000 series aluminum Thomson Elite post and stem🤘🤘; and a 7075 aluminum King headset🤘🤘. I'm hoping to order a set of Mavic Crossride 26" wheels; they're going to be over 💰600.00🍁😳. And a pair of Rock Shox Recon TK Silver shocks; these will be over $400.00🍁. I do wish I had more Titanium on my bike, or better a Titanium MOOTS frame😁🤘🤘 "YEAH"❗️ S🍁rry for writing a book😏
@garysprojects The only original part from my July 2007 purchase is the sh!tty headset spacer, HaHa. I recently ordered a Hope 2014 aluminum headset spacer kit; Dr. Blue is the colour I believe. It was only $26.00👍👍. I was going to order the more expen💰ive 7000 series aluminum Thomson headset spacer kit, but I have too much black and silver on my bike; it needs a bit more colour😁. I also ordered along with that hope headset spacer kit a pair of Ergon GA3 grips; they were $56.00👍👍
I also ordered a Jegwire compressionless Kevlar reinforced brake housing/cable kit🤘🤘. I didn't need this, but ah, well. It was "only" $70.00, lol. I'm also planning on buying Jegwire's 2× compressionless shifting set; it's also "only" about $70.00🍁 😁
Hi Gary, thank you for featuring my bike, I didn't expect it to be so soon. Appreciate it! Greetings from Poland
Cheers mate thanks for sending it !
How long did it take?
@@christopherwebb3517 Depends on how many people are on the list, check the end of the video, it's usually 20 bikes per video. For me it took a little over a month.
What an honour! Thanks for including my build. Loving the series.
thank you hakan thanks for sending! cool bike
What sort of range do you get out of the battery? How's the torque sensing feel?
@smultron3030 around 60-100km depending on the level of assist. There's no proper torque sensing, but there is a mode that feels like there is, but the motor just tries to match your speed.
Let’s goo!! Finally made it. Thanks for the roast. Front brake came and I ended up chopping the legs of the basket.
hahah good to know ! thanks for sending in
It's 4:50am rn but frick it I'm watching bike talk
@@CryptJeeper 😂😂😂 damn that’s late… or early
Heh heh heh three shadows. Damn, solid turkey in the oven and it's...ROAST'N
hahah takes a special photographer to do that
20:32
So many drinks on my Indie 3.
Those bars were rotated pretty far forward and 5 degree back sweep only. Took over a month to get the back wheel spaced and stable so the thing wouldn't rub. DT spokes cut 24 in total.
I actually tried a suntour suspension fork and as well the Surly fork..
23:02. 🍻
yeah my guy slides I got to ride the step-thru like a true slacker.
Hakan bike with the no sand. 😅😅
Of course I carried it on to the beach for the pics lol 😅
@@hakannedjat I KNOW RIGHT!! 💯 yeah. I'm wearing my slides to breakfast on my step-thru
Ayyyy nice ! Good fix up on the bike and nothing more chill than slides 😆
Thanks for the review Gary - that old racer of my dad's probably should have gone in the skip, but I guess it shows that you cant keep a good bike down 😂 Gareth
Hahah true that ! Good save mate , well done !
5:25 - Spot the difference: The sunlight shining through the fence is at a slightly different angle in the second picture.
ooo good eye!
Lol come clean with the giraffe stem you are hilarious
😆😆😆 can’t hide that from anyone
Gareth did a great job of restoring his dad's old 5 speed bike.
Reminiscent of my old Sun 5 speed.
I know I keep saying this, but the restoration of these beautiful old frames / bikes and put to use is fantastic.
Oi! Oliver, chuck it in my skip mate 😂
Yes ! Gareth’s bike looked like trash lol. No my skip first 🤣🤣🤣
@@garysprojects 🤣🤣🤣
Thank you for your kind words, it was a bit of a slog at times but glad I stuck with it and managed to resurrect the bike to be enjoyed again!
@@MrMisaKulicka You're welcome mate. 👍
Some super sick bikes. The first one, Gregs Spesh does it foe me.
Hell ya that was a good one. Thx Harry 🙏
Cold blooded Gary. But fair. That S-Works is a bit of a wreck when you get close up enough. And I'd completely failed to notice that M910 rear mech! They were cosmetically very similar but mechanically very different, but how did I not pay attention to that phat parallelogram spring?
Hahaha cheers mate ! Don’t worry that is an easy miss, thanks for sending in ! Can chuck it in my skip anytime
17:21 I think this bike needs the long stem set-up from my Spez. 😂😂😂😂
hahaha yessss
LOL. my bike didn't make it.
Next episode maybe, I do them in order
I got the exact same specialized sworks 94' frame, in that same color, same saddle post, same Ti stem, but with nice 1.5 ritchey slick road tires. Under 10kg.
Got it on an awesome deal.
Just needed rear deraileur hanger and deraileur (bought the exact same old one from factory), swapped front forks for a rigid one and a decent saddle.
Very stupidely, i modded the stock front canti brake hanger, when it still had the weirdo suspension shock (canti did not work as it was incorrectly mounted). Now has a tilng TEKTRO?/NOS? cantilever brake hanger that works on the lower fork mount.
Got to solve a loose lower head set bearing race (the one from the fork), don't know why it was ok on the idiot shock but loose on the rigid fork.
hell ya that is one sick bike ! mmm yeah not sure maybe the crown race has warped? not sure though, sick bike none the less !
Glossed over the Magura hydraulic rim brakes on the wheeler, got distracted by the wonky front rack did ya?
tbh nothing too special 😂😂😂😂
Hakan's wins this round for me.
Is a cool one for sure !
Color on that Fork isOEM I believe..
Oh interesting
29:10 Is it really useful to convert MTB (I guess) into single speed with these semi-vertical dropouts? I mean it’s not a fixed gear and chain tension is not relevant and I think clearance is ok, but anyway (sorry, I am new here)
Also thank you for your content, it’s actually very useful
@@Nkellllll1 you can run a chain tensioner to help tension the chain, some ppl like to convert to single speed for simplicity , but yeah up to the rider. Cheers mate !
Rafael 's bike is cool!!!
for sure!
🙌🏼🙌🏼
My 2006/07 Trek 4300 6061 aluminum "wishbone" frame has M739 XT V-brake levers, M760 XT V-brakes👍👍, an XT M770 HollowTek 2 crank🤘🤘,an M772 XT Shadow rear derailer 🤘🤘, XT 760 front dereailer 👍👍, M772 XT Rapid
F!re+ shifters🤘🤘with a 9spd. M970 XTR cassette 🤘🤘. 7075 TITEC H*llbent riser bars, 7000 series aluminum Thomson Elite post and stem🤘🤘; and a 7075 aluminum King headset🤘🤘. I'm hoping to order a set of Mavic Crossride 26" wheels; they're going to be over
💰600.00🍁😳. And a pair of Rock Shox Recon TK Silver shocks; these will be over $400.00🍁. I do wish I had more Titanium on my bike, or better a Titanium MOOTS frame😁🤘🤘 "YEAH"❗️
S🍁rry for writing a book😏
damn! all decked out, sounds like a great bike
@@garysprojects I spent a "bit" of $$ on a rather mid range frame; ah well😁🤘🤘
@garysprojects The only original part from my July 2007 purchase is the sh!tty headset spacer, HaHa. I recently ordered a Hope 2014 aluminum headset spacer kit; Dr. Blue is the colour I believe. It was only $26.00👍👍. I was going to order the more
expen💰ive 7000 series aluminum Thomson headset spacer kit, but I have too much black and silver on my bike; it needs a bit more colour😁. I also ordered along with that hope headset spacer kit a pair of Ergon GA3 grips; they were $56.00👍👍
I also ordered a Jegwire compressionless Kevlar reinforced brake housing/cable kit🤘🤘. I didn't need this, but ah, well. It was "only" $70.00, lol. I'm also planning on buying Jegwire's 2× compressionless shifting set; it's also "only" about $70.00🍁 😁
2:06 what are the cranks Stephan is running?
Looks like promax Bmx cranks
Do you have a brother named Manny?
gottemmmm