I run a business and it has failed over automatically about 4 times in this last year. Amazing product. Well worth the $15 a month and ease of use is the best. Keep it up.
@@schwagerik_ It's super simple to just use an LTE router and put it on a secondary WAN port. Here in my home I have a WISP, and two LTE/5G modems. For example, I have a T-Mobile router that has completely unlimited data, no throttling, nothing. Just plug that into your second WAN port and go to town. It's cheaper than the U-LTE solution, and has no limits. Why mess with the U-LTE?
@@SeattleSandro Earlier this year I pulled out my Unifi gateway because of lack of features (this update adds some back) and lack of support for 3 or more WAN connections. I pay $80 a month for my 15/5 WISP, but I'm about to cut them loose. I pay $30 a month for T-Mobile and $119 a month for AT&T. I am running a home-built pfSense gateway now.
Can you list the specific firmware/network app verions that are needed for each supported device, so that load balancing is actually enabled? So far the only device I have is the USG-Pro-4. I have been updating my test bench UDM-Pro with Release Candidate and Early Adopter versions recently, and despite the written release notes telling me that load balancing is enabled, I don't see it in the UI
Now my only question is, is the UDM-Pro also going to get this? As it has yet to even remotely receive UniFi OS 2.5. Or is the UDM-Pro basically phased out?
@@UbiquitiInc how soon do you know, is it a matter of weeks or months? im considering switching over to pfsense to get this working as ive been waiting so long for this. i have dual 1Gbps circuits that need to be loadbalanced. pls reply :D
Would it be possible to make a video explaining how throughput is affected in relation to threat management settings? I would love to hear your breakdown on that particular matter more than anything. Thank you for all your hard work. I appreciate your time.
Does this allow policy based routing? Send traffic out a specific WAN port based on criteria such as source IP, destination IP, source port, destination port?
I have been waiting for so long policy routing too, but I don't know if this system would work well for me I use edger outer cause I'm isp but I can't use policy routing there...
can we talk about VPN connections in a failover situation? with the uLTE, we cannot use our site-to-site VPN as the WAN changes on that uLTE. We try our best to stay in the unifi ecosystem, but we also rely on a site-to-site.
Thanks for your patience! UDM does not support Dual WAN functionality as it only has one WAN port. However, UDM Pro will be coming very soon! Stay tuned at community.ui.com/releases for the latest.
Yeah when? I need the ability to force Zoom, and Discord over Wan 2 while every other traffic can be over Wan 1. my ISP's Starlink and Consolidated Communications DSL. Starlink, although much faster than DSL, tends to randomly go out multiple times per day usually during important meetings and I need reliability and uptime for specific programs. Failover isn't working in my situation as Starlink might go down for 3-15 seconds 5 times per hour which in my case just makes the internet not work for anyone.
@@UbiquitiInc I'm asking about the firmware update that supports it, I'm aware the UDM base has one wan port, both the UDM base and udm pro are running Debian stretch on the 4.19.125 kernel, yet the udm se is running Debian buster on virtually the same hardware as the pro. We should have already had a 3.x.x firmware based on bullseye months ago considering that bulls eye was released a year ago.
@@xVertigo101 This is already doable. Traffic Routes has been a feature since 1.12/2.4 firmware. Settings > Traffic Management > Traffic Routes. Use a Domain or IP rule to route specific traffic over WAN2.
Can someone tell me what to do if one is faster at download whereas the other is faster at upload? I have WAN1 at 1200/35 and WAN2 at 200/100. The load balancing ratio doesn't help for both download and upload then. What option do I have left?
*UniFi OS 2.5 / Network 7.2 Required for Load Balancing* Currently supported on UDM SE. | UDM Pro, UXG Pro will be coming very soon! Stay tuned at community.ui.com/releases for the latest.
@@UbiquitiInc Yeah. The UDM-Pro has been stuck on V1.12 for months. No load balancing, please either update the video/description or tell us when it will be available. This is extremely misleading
Both of these capabilities are nice, but the failover is way too sensitive and seems to use latency as the determinant for the network being out of service. The only way I’ve been able to get my UDM SE to behave is to physically disconnect the secondary WAN connection. My primary is a wireless LTE connection as I am very rural and this has higher latency but more bandwidth than the terrible DSL service I get here (backup connection). Unfortunately LTE is subject to some packet loss and variable latency/jitter and so the UDM SE was constantly failing over and as there is no control over how tolerant the failover is, it made the feature useless for me at the moment
I have to ask about the load-balancing. You made it sound like you can balance only 100Mbps of bandwith. At 2:32 you mentioned you can set WAN1 to 80Mbps and WAN2 to 20Mbps. If that is the case, that is not what everyone will be expecting... I would think that this balance would cover the percentage of internal traffic going one way or another.
@@overamped23042 that would be my understanding but why would it be concerned with the ISP speeds anyway. In my eyes, this feature should look only into the internal traffic, split it percentage wise the way you set it, that's it.
@@EternalLionZeke yeah im on 7.2.92 and not seeing loadbalancing but only my failover no option to change or select as per the above but they running 7.3
Can the failover WAN connection be a VLAN? because I don't want to run an extra cable as the LTE modem is locate far away form the router. Unifi LTE isn't offer where i am.
what about reverting to wan1 (after a failover to wan2), when wan1 becomes active/available again?? Failover works, but never goes back to the primary wan connection on the USG.
Год назад
Good but to fast in particularly for the LTE backup!!! You said that is working in combination of WAN1 and WAN2 but is not clear. For example can I've a configuration in load-balancing in which: PC1 --> use WAN1 WAN1 --> FAIL PC1 --> use WAN2 THEN, in case of fail of both WAN2 and WAN1 PC-> use the LTE!!!
Is the traffic inspection still reliant on using the Unifi device(s) as client DNS servers? If so, that negates that functionality for any network that uses something else for its DNS resolution (ie AD DNS, PiHole, OpenDNS).
The video explicitly states the use-case for limiting social media traffic and routing that traffic out of WAN 2 while keeping WAN 1 for primary business use, however I can't see how to do this. In traffic management, the rules section allows you to block, allow or speed limit types of traffic and this can be picked on app or app group which is great. However when moving over to the Routes section, those apps and app groups are not available. The only way to add a route is by domain name, IP address or region. Am I missing something obvious here? I expected to be able to select App or App Group in the routing section - or at least be able to select the traffic rule I created and route that - but this doesn't appear to be possible. Can anyone assist please?
@@Elucidator Does Ubiquiti have somewhere a feature matrix that would list what devices support which of these advanced networking features of Unifi Network? Seems lately to be lots of "here's feature X (supported only on these select devices), here's feature Y (supported only on these other select devices), etc. and it's hard to navigate what is supported where and from what version onwards.
After 9 months and still nothing done on the UDM PRO , we have to reconsider the definition of the word 'soon' in Ubiquiti! Unbelievable i have to give up on my DMP only because it doesn't has this feature yet.
Год назад+2
It was released today (: I just got up and then checked it.
This is great news, loved the explanation of the different options. Question however, when will Unifi OS 2.5 become Official Release (I'm located in Canada)?
@@LarsKlintTech I'm stuck on 1.12.22 on my UDM-Pro and updates page says "Up to date" Networks is at "7.2.92" also stating "Up to date" and my only selection for "Unifi OS Release Channel" is "Official", nothing else in the drop down.
Finally! I just downgraded my UDM Pro to an EdgeRouter 8 Pro just for dual-WAN load balancing. A week sooner or a comment on any of the numerous forum threads requesting it would've been nice though..
Yeah. This video is super confusing. The UDM-Pro is a full release of Unifi OS than everything else. I probably would have not gotten the UDM-Pro and just done self hosted if I knew the UDM-Pro was not gonna get the latest or support load balancing. I have 2 WANs and was under the impression it would support load balancing...
It was the same for me, I was expecting load balancing and was confused as I found out that my UDM-Pro doesn’t support it. And now the UDM-Pro also don’t get it. I don’t like the current policy of Ubiquiti
can you stack multiple wan ip addresses onto a single wan port yet? like i have a /29 and would love to be able to put those multiple ips on the same wan port.
Mate, could i ask. My company have 200 users with 600 devices maximum. I want to build a server room with unifi solution, include 12 access points, udm se ascontroller (to sso with azure), 2 poe sw, 2 router running load balance failover mode, when the main router got proplem, the secondary router will continue. So which unifi model/ version can help me ? As I know 2 unifi routers can not load balance as active-passive mode, right? Any solution for this if I need router backup in case one router got problem ?
@@UbiquitiInc It really isn't. 2.5 is at least 3 releases away, even EA isn't 2.5. So the soonest seems to be a least a few weeks, but more likely months or longer.... Very misleading, esp for someone moving to/living in a rural area looking for a load balancing solution that would work today
When I bought the udm pro I expected what I read about it. I have never had so much fun with a router. It's like a piece of art with the GUI. Can't wait to get the doorbell to yell racial slurs at the neighbors for playing music too loudly and waking people in the house up
This won’t increase your download speed. A single 1GB file won’t download any faster, but if you’re downloading two 1GB files it will be twice the speed. Personally I wouldn’t bother with this, instead I would use MPTCP bonding to combine your two WAN connections into a single connection. Say if you had two 80Mbps connections you could create a single 160mbps connection. If you visit Speedtest it would say 160. Very useful for places where you can get maybe 80 down but only 20 up. You could essentially have a 160/40 connection. Unfortunately Ubiquity isn’t doing this, and I doubt they’ll do it in the future as it requires a server on the other end to stitch the packets back together
So you give this function to the SE and router first but not the largest Pro installation base? We are the group who has been waiting the longest for something that should’ve been there long ago. Explain this BS treatment of your loyal users Unifi Expert.
Each console is different and we are taking necessary steps to refine this important feature before rolling out to our largest installation base. Thanks for your patience and understanding as we are excited to roll this out as soon as possible.
@@UbiquitiInc How long has the UDM Pro been out? How long has the SE and Router been out? How long have you been working on this function for the UDM Pro? Are the UDM Pro and SE virtually the same components and architecture aside from PoE and built-in storage?
Load balancing for the nonsense does an edge router x do it, not more expensive like the sfp+ module? In times of home office, fast VPN like Wireguard is in demand! Which cloud do you actually sleep in?
Mostly all this works great. But I have tested your cloud controller after one of these videos and it was a shitshow hour cloud controller can’t handle anything with real business needs. We had like 75 devices and it crashed. So when you say “expert corner” that’s using that term loosely.
Thanks for your feedback. Please share more info about your Cloud Console setup and any related support ticket numbers here: community.ui.com/social-feedback so we can escalate, review, and assist. Thank you.
Just hope this comes to the UDM-PRO as soon as possible.
do you know if this is available now por the UDM pro?
So when will this be available for UDM Pro ?
Loving the expert corner series, great job Spencer !
Ive been using the network failover capabilities for over a year now and it works great.
Unfortunately, this is not working well with the LTE Pro :(
@ I'm using fiber and cable. I haven't tried the LTE yet.
I run a business and it has failed over automatically about 4 times in this last year. Amazing product. Well worth the $15 a month and ease of use is the best. Keep it up.
I love this expert corner!. Quick question, is this feature available now on UDM-PRO?. Thanks so much!
It was released today (: I just got up and then checked it.
This is crazy. The amount of customization you can do is awesome!!! I absolutely love my Ubiquity equipment and they delivered on this one.
Ubiquiti LTE support load balancing? Tell me, yes...
Failover only
@@tornadotj2059 I know, but I wonder if that feature load balancing will be possible in the future.
@@schwagerik_ It's super simple to just use an LTE router and put it on a secondary WAN port. Here in my home I have a WISP, and two LTE/5G modems. For example, I have a T-Mobile router that has completely unlimited data, no throttling, nothing. Just plug that into your second WAN port and go to town. It's cheaper than the U-LTE solution, and has no limits. Why mess with the U-LTE?
@@tornadotj2059 Which router do you have? Roughly how much is your service /mo?
@@SeattleSandro Earlier this year I pulled out my Unifi gateway because of lack of features (this update adds some back) and lack of support for 3 or more WAN connections. I pay $80 a month for my 15/5 WISP, but I'm about to cut them loose. I pay $30 a month for T-Mobile and $119 a month for AT&T. I am running a home-built pfSense gateway now.
Good video, clearly and confidently presented. Thank you, look forward to a working setup on UDM Pro
Hello, do you have a forecast to make Load Balance available for UDM-PRO?
Look at the video description!!!
It was released today (: I just got up and then checked it.
Can you list the specific firmware/network app verions that are needed for each supported device, so that load balancing is actually enabled? So far the only device I have is the USG-Pro-4. I have been updating my test bench UDM-Pro with Release Candidate and Early Adopter versions recently, and despite the written release notes telling me that load balancing is enabled, I don't see it in the UI
Now my only question is, is the UDM-Pro also going to get this? As it has yet to even remotely receive UniFi OS 2.5. Or is the UDM-Pro basically phased out?
Support for UDM Pro, UXG Pro will be coming soon! Stay tuned at community.ui.com/releases for the latest.
@@UbiquitiInc how soon do you know, is it a matter of weeks or months? im considering switching over to pfsense to get this working as ive been waiting so long for this. i have dual 1Gbps circuits that need to be loadbalanced. pls reply :D
This was a perfect overview while hitting all of the important points!
Can you cover optimizing network settings for WiFi calling? That would be a great topic.
how about adding WAN aggregation
Awesome! Great to see this feature come to Unifi!
any eta on the UDM pro fix?
Would it be possible to make a video explaining how throughput is affected in relation to threat management settings? I would love to hear your breakdown on that particular matter more than anything. Thank you for all your hard work. I appreciate your time.
Does this allow policy based routing? Send traffic out a specific WAN port based on criteria such as source IP, destination IP, source port, destination port?
I have been waiting for so long policy routing too, but I don't know if this system would work well for me I use edger outer cause I'm isp but I can't use policy routing there...
Implement a SDWAN out of the box setup, with the cloud portion as a monthly or yearly fee. !!
Just now I was looking for a router that does this. Can the uplink ports also be configured for any VLAN like on a normal switch?
can we talk about VPN connections in a failover situation? with the uLTE, we cannot use our site-to-site VPN as the WAN changes on that uLTE. We try our best to stay in the unifi ecosystem, but we also rely on a site-to-site.
So when exactly does the UDM B/P get the 2.x.x update we have been promised all this time?
Thanks for your patience! UDM does not support Dual WAN functionality as it only has one WAN port. However, UDM Pro will be coming very soon! Stay tuned at community.ui.com/releases for the latest.
Yeah when?
I need the ability to force Zoom, and Discord over Wan 2 while every other traffic can be over Wan 1.
my ISP's
Starlink and Consolidated Communications DSL.
Starlink, although much faster than DSL, tends to randomly go out multiple times per day usually during important meetings and I need reliability and uptime for specific programs.
Failover isn't working in my situation as Starlink might go down for 3-15 seconds 5 times per hour which in my case just makes the internet not work for anyone.
@@UbiquitiInc I hope you guys don't blow up the conversion and require a restore from backup to upgrade.
@@UbiquitiInc I'm asking about the firmware update that supports it, I'm aware the UDM base has one wan port, both the UDM base and udm pro are running Debian stretch on the 4.19.125 kernel, yet the udm se is running Debian buster on virtually the same hardware as the pro.
We should have already had a 3.x.x firmware based on bullseye months ago considering that bulls eye was released a year ago.
@@xVertigo101 This is already doable. Traffic Routes has been a feature since 1.12/2.4 firmware. Settings > Traffic Management > Traffic Routes. Use a Domain or IP rule to route specific traffic over WAN2.
Can someone tell me what to do if one is faster at download whereas the other is faster at upload? I have WAN1 at 1200/35 and WAN2 at 200/100. The load balancing ratio doesn't help for both download and upload then. What option do I have left?
Is this functionality added to Unifi for the USG-PRO-4?
WoW, I sold all my Unifi gear. Will give Unifi a 2nd look now. Thanks for sharing
These are excellent tips. For a network noob like myself, setting up failover was surprisingly easy. Well done Spencer 🙂
I have an UDM-Pro with 2 WANs. Port9 (GE) and Port10 (SFTP+) but the Load Balancing Option is not available (SW 7.2.92) What can I do?
*UniFi OS 2.5 / Network 7.2 Required for Load Balancing*
Currently supported on UDM SE. | UDM Pro, UXG Pro will be coming very soon! Stay tuned at community.ui.com/releases for the latest.
@@UbiquitiInc Yeah. The UDM-Pro has been stuck on V1.12 for months. No load balancing, please either update the video/description or tell us when it will be available. This is extremely misleading
Both of these capabilities are nice, but the failover is way too sensitive and seems to use latency as the determinant for the network being out of service. The only way I’ve been able to get my UDM SE to behave is to physically disconnect the secondary WAN connection. My primary is a wireless LTE connection as I am very rural and this has higher latency but more bandwidth than the terrible DSL service I get here (backup connection). Unfortunately LTE is subject to some packet loss and variable latency/jitter and so the UDM SE was constantly failing over and as there is no control over how tolerant the failover is, it made the feature useless for me at the moment
awesome been expecting this feature glad to see it coming
I have to ask about the load-balancing. You made it sound like you can balance only 100Mbps of bandwith. At 2:32 you mentioned you can set WAN1 to 80Mbps and WAN2 to 20Mbps. If that is the case, that is not what everyone will be expecting...
I would think that this balance would cover the percentage of internal traffic going one way or another.
WAN1: 800Mb/s
WAN2: 200Mb/s
It's just an example of 80%
@@overamped23042 that would be my understanding but why would it be concerned with the ISP speeds anyway. In my eyes, this feature should look only into the internal traffic, split it percentage wise the way you set it, that's it.
@@overamped23042 For me: 180Mb/s and 500Mb/s
Sure would be nice to see the update for this on the normal UDMP...
I have it on the normal UDM Pro 🧐
Im not in early access
@@snoks How? UDMP is not onOS2.x.x yet
@@Phan7om7 Can confirm, running a UDMP, UniFi OS 1.12.22 Main branch, Network 7.2.92. Load Balancing is available.
@@EternalLionZeke yeah im on 7.2.92 and not seeing loadbalancing but only my failover no option to change or select as per the above but they running 7.3
It would be nice if we get a 2.x.x update, considering that wee should be on a 3.x.x update by now.
Can the failover WAN connection be a VLAN? because I don't want to run an extra cable as the LTE modem is locate far away form the router. Unifi LTE isn't offer where i am.
what about reverting to wan1 (after a failover to wan2), when wan1 becomes active/available again?? Failover works, but never goes back to the primary wan connection on the USG.
Good but to fast in particularly for the LTE backup!!! You said that is working in combination of WAN1 and WAN2 but is not clear.
For example can I've a configuration in load-balancing in which:
PC1 --> use WAN1
WAN1 --> FAIL
PC1 --> use WAN2
THEN, in case of fail of both WAN2 and WAN1
PC-> use the LTE!!!
Love the new content thank you so much, are you guys considering doing maybe a deep dive experts corner?
Would load balance be possible between UDM-SE and USG? If so, possible between 3 routers?
Same question, when will it be available on Udm Pro ?
UDM Pro will be coming very soon!
@@schwagerik_ Great ! I can't wait !
Is the traffic inspection still reliant on using the Unifi device(s) as client DNS servers? If so, that negates that functionality for any network that uses something else for its DNS resolution (ie AD DNS, PiHole, OpenDNS).
it is a link to switch over fiberoptic as well, right?
Can I use wan 1 for LAN and WLAN and wan 2 for guest wifi only but still be able to have wan 2 as failover for wan 1 ?
Fixed traffic option not supported in usg pro 4?
Lovely...if only this bludy worked on a UDM Pro. No distributed option there.
It was released today (: I just got up and then checked it.
@ Yeah found it lol. 'Bout time :D
Now there is
The video explicitly states the use-case for limiting social media traffic and routing that traffic out of WAN 2 while keeping WAN 1 for primary business use, however I can't see how to do this.
In traffic management, the rules section allows you to block, allow or speed limit types of traffic and this can be picked on app or app group which is great. However when moving over to the Routes section, those apps and app groups are not available. The only way to add a route is by domain name, IP address or region.
Am I missing something obvious here?
I expected to be able to select App or App Group in the routing section - or at least be able to select the traffic rule I created and route that - but this doesn't appear to be possible.
Can anyone assist please?
Can you have more than one backup connection?
Be interested to see if this causes asymmetric routing
My modem has 2 ethernet ports and allows for LAG to get 2 gigabit to my ISP. Does unifi Load balancing allow me to take advantage of that?
This would not be load balancing. You have a 2gbps connection over one ISP. There is nothing to load balance.
can we prioritize upload through wan2 ?
Does load balancing now works with VPN access? That never worked with the USG. So you had to choose between LB oder VPN access…
so wan1 =10mb wan2=20mb then loadbalancing create 30MB single IP ?
It depends on how you set it up, but you have 2 outgoing IP addresses. But especially with P2P this can cause problems.
Can you do load balancing on WAN1 and WAN2 with fail over to LTE?
How would I load balance between two VPN interfaces?
How do you route to wan2 based on application like stated 1:27?
This is awesome content. Keep it up!
How about stacking or multi chassis LAG?
This is awesome!
Does this also cover the USG-3P which has the "option" port?
Sadly not, no.
@@Elucidator Does Ubiquiti have somewhere a feature matrix that would list what devices support which of these advanced networking features of Unifi Network? Seems lately to be lots of "here's feature X (supported only on these select devices), here's feature Y (supported only on these other select devices), etc. and it's hard to navigate what is supported where and from what version onwards.
@@-tsvk- I totally agree. I do not know any feature matrix. I personally had to go through all their products to find what is best for my case.
Guys, when it will be available for UDM Pro?
It was released today (: I just got up and then checked it.
After 9 months and still nothing done on the UDM PRO , we have to reconsider the definition of the word 'soon' in Ubiquiti! Unbelievable i have to give up on my DMP only because it doesn't has this feature yet.
It was released today (: I just got up and then checked it.
This is great news, loved the explanation of the different options. Question however, when will Unifi OS 2.5 become Official Release (I'm located in Canada)?
I run Unifi OS 2.5.11 on my UDM SE.
@@LarsKlintTech I'm stuck on 1.12.22 on my UDM-Pro and updates page says "Up to date" Networks is at "7.2.92" also stating "Up to date" and my only selection for "Unifi OS Release Channel" is "Official", nothing else in the drop down.
@@Teragonsu Yeah, that is the up to date version for the UDM Pro. Not sure if/when the 2.X will be available.
Some clients of mine require more than 2 wan interfaces. What is your solution to that ??
Finally! I just downgraded my UDM Pro to an EdgeRouter 8 Pro just for dual-WAN load balancing. A week sooner or a comment on any of the numerous forum threads requesting it would've been nice though..
It’s not actually available on the UDMP yet.
Beta or otherwise. The video is misleading/deceptive.
I'm in the exact same situation, I can't wait for this to get to udm pro.
Yeah. This video is super confusing. The UDM-Pro is a full release of Unifi OS than everything else. I probably would have not gotten the UDM-Pro and just done self hosted if I knew the UDM-Pro was not gonna get the latest or support load balancing. I have 2 WANs and was under the impression it would support load balancing...
It was the same for me, I was expecting load balancing and was confused as I found out that my UDM-Pro doesn’t support it. And now the UDM-Pro also don’t get it. I don’t like the current policy of Ubiquiti
can you stack multiple wan ip addresses onto a single wan port yet? like i have a /29 and would love to be able to put those multiple ips on the same wan port.
dual wan load balancing and failover can be set at the same time?
Load balancing can also fail over
Mate, could i ask. My company have 200 users with 600 devices maximum. I want to build a server room with unifi solution, include 12 access points, udm se ascontroller (to sso with azure), 2 poe sw, 2 router running load balance failover mode, when the main router got proplem, the secondary router will continue. So which unifi model/ version can help me ?
As I know 2 unifi routers can not load balance as active-passive mode, right?
Any solution for this if I need router backup in case one router got problem ?
Muy buenos productos y muy buena tecnología saludos desde México
Is this coming to the UDMP? Mine is up to date but doesn't have it yet.
Currently supported on UDM SE | Support for UDM Pro, UXG Pro will be coming soon! Stay tuned at community.ui.com/releases for the latest.
Any hopes of getting this functionality on our UniFi Dream Routers?
Static rule usg-pro-4 support?
Wish the UDM-P could do this.
It was released today (: I just got up and then checked it.
I see the Power Distribution box in use - is that going to be available anytime soon?
Power Distribution Unit Pro is still in Early Access and still in development. Stay tuned for official updates and releases at store.ui.com
@@UbiquitiInc I check the EA store 2 times a day lol!
"UXG Pro will be coming very soon! " yes.. just like teleport
🤣🤣
Wait. How do I get Unifi Os 2.5 on my UDM-Pro?!!
Coming soon, more details in the description. Thank you.
@@UbiquitiInc It really isn't. 2.5 is at least 3 releases away, even EA isn't 2.5. So the soonest seems to be a least a few weeks, but more likely months or longer.... Very misleading, esp for someone moving to/living in a rural area looking for a load balancing solution that would work today
About time.
how to use Load Balancing and fail over at same time?
Load balancing can also fail over
Load Balancing load balances and fails over
Will this support the usg security gateway pro 4?
Support usg pro 4?
Load balancing between fiber-to-the-curb and StarLink.
Where is the UDMP firmware update? We can't use this future on UDMP "yet".
Support for UDM Pro, UXG Pro will be coming soon! Stay tuned at community.ui.com/releases for the latest.
Thanks.
Will you be creating a 5G failover device?
Please hurry on the udm pro
Everything is great but shame is that all unify routers has to weak CPU's to handle south heavy task like load balancing
Check out our NextGen Gateway Pro > store.ui.com/products/unifi-next-generation-gateway-professional
Support for UDM Pro ???
It was released today (: I just got up and then checked it.
Does Udm pro supports this ?
Support for UDM Pro, UXG Pro will be coming soon! Stay tuned at community.ui.com/releases for the latest.
@@UbiquitiInc USG-PRO-4 Support????
Nice addition but businesses need failover point to point VPN configurable interfaces too.
On switch 😱, awesome. But security...
So much easier than routerOS
When I bought the udm pro I expected what I read about it. I have never had so much fun with a router. It's like a piece of art with the GUI. Can't wait to get the doorbell to yell racial slurs at the neighbors for playing music too loudly and waking people in the house up
Good
Wie bündelt man?
And what about the UI reset everytime?
That has been here for 4 versions now...
Fix old bugs first!!
Without promoting Beta's
This won’t increase your download speed. A single 1GB file won’t download any faster, but if you’re downloading two 1GB files it will be twice the speed.
Personally I wouldn’t bother with this, instead I would use MPTCP bonding to combine your two WAN connections into a single connection. Say if you had two 80Mbps connections you could create a single 160mbps connection. If you visit Speedtest it would say 160. Very useful for places where you can get maybe 80 down but only 20 up. You could essentially have a 160/40 connection.
Unfortunately Ubiquity isn’t doing this, and I doubt they’ll do it in the future as it requires a server on the other end to stitch the packets back together
So you give this function to the SE and router first but not the largest Pro installation base? We are the group who has been waiting the longest for something that should’ve been there long ago. Explain this BS treatment of your loyal users Unifi Expert.
Each console is different and we are taking necessary steps to refine this important feature before rolling out to our largest installation base. Thanks for your patience and understanding as we are excited to roll this out as soon as possible.
@@UbiquitiInc How long has the UDM Pro been out? How long has the SE and Router been out? How long have you been working on this function for the UDM Pro? Are the UDM Pro and SE virtually the same components and architecture aside from PoE and built-in storage?
𝙥𝙧𝙤𝙢𝙤𝙨𝙢 😊
Multiple wan IP addresses to a wan port connection? Anyone Buller anyone? Lol
Load balancing for the nonsense does an edge router x do it, not more expensive like the sfp+ module? In times of home office, fast VPN like Wireguard is in demand! Which cloud do you actually sleep in?
First
Mostly all this works great. But I have tested your cloud controller after one of these videos and it was a shitshow hour cloud controller can’t handle anything with real business needs. We had like 75 devices and it crashed.
So when you say “expert corner” that’s using that term loosely.
Thanks for your feedback. Please share more info about your Cloud Console setup and any related support ticket numbers here: community.ui.com/social-feedback so we can escalate, review, and assist. Thank you.
UDM Pro ?!?!?
It was released today (: I just got up and then checked it.