Interesting to see you use the negative rake facemill. I have never had much luck with them. I like the positive cutting action of the Sandvik R245 instead. Good video.
Nabudúce by mohli byť časti videa aj len s čistým zvukom nástroja pri obrábaní. Ak používate chladenie vymrazovacou tryskou na pár sekúnd by ste ju mohli vypnúť nech je počuť len nástroj. Inak parádne videjko aj súčiastka! BTW skúste niekedy nájsť Pramet plátky do telies od Pokolmu. Pasujú a držia jak vínko! Pramet 4win!
Так что? На лицевой стороне не ошибка технолога ЧПУ? Я так понимаю, все равно металл там удалили? В отверстиях... Станок вообще огонь! Хорошая скорость и чистота обработки.
Hello sir if any cnc machinist job please reply I am working in vmc in tool room our company make die for ola electric and I work in AWEA 2012 and makino machine thank you sir
Just curious did you guys try the new toolpaths tech like dynamic milling in mastercam , if yes why do you still use the old school toolpaths in roughing ?
I use dynamic (opti-rough) in mastercam for roughing with feed mills. But not because its quicker (because its not, iv tested) but because it manages tool load far better. Allowing me to push cutters more reliably and achieve far better tool life. Also with standard roughing toolpaths we have to use corner rounding, which leave excess in corners but opti roughing doesn't need this so cuts more material.
@@yanivchen6401 This roughing takes about 10% of the total mold production. Finishing strategies are especially important on the mold, and cimatron has a lot of them
I got this cutter from pentagonal blades for testing. I worked with it for about 3.5 hours and the blade is still good. I'll probably keep it.
perfect video to enjoy a cup of coffee with ☕
ruclips.net/video/xJKqdlFhFk8/видео.html
Zase super video! Moc rad na vas koukam, vzdy si odnesu par novych zkusenosti a vedomosti. Jen tak dal 🙂👍
Ďakujeme
Interesting to see you use the negative rake facemill. I have never had much luck with them. I like the positive cutting action of the Sandvik R245 instead. Good video.
ruclips.net/video/xJKqdlFhFk8/видео.html
Nice Job Guys
greetings from Germany 🇩🇪
Dankeschön
Beautiful work👍
Love those lumps at 3:14 we've all done it. Sometimes pushed it too far 🤦♂️
Хорошая работа, бро!
Nabudúce by mohli byť časti videa aj len s čistým zvukom nástroja pri obrábaní. Ak používate chladenie vymrazovacou tryskou na pár sekúnd by ste ju mohli vypnúť nech je počuť len nástroj. Inak parádne videjko aj súčiastka! BTW skúste niekedy nájsť Pramet plátky do telies od Pokolmu. Pasujú a držia jak vínko! Pramet 4win!
Так что? На лицевой стороне не ошибка технолога ЧПУ? Я так понимаю, все равно металл там удалили? В отверстиях... Станок вообще огонь! Хорошая скорость и чистота обработки.
ruclips.net/video/xJKqdlFhFk8/видео.html
Tiež pracujem na CNC Frézke a ako obdivujem Vás čo dokážete vymajstrovať.Veľký palec hore
Dík
Ako dlho sa venujete kovoobrábaniu?
Od učňovky čiže asi 29 rokov
Love your work guys... ,but dear God.... invest in proper screws for those shell mills ;)
커터 장인!
Chips Ahoy!
Ahoj
How long was the total run time?
What brand is your CNC??? It's amazing similar to the AWEA's that I used to run....
UCHINE UDM-2216
Do you program the high feed mills with theoretichal corner radius or do you model your tools to match with the insert profile?
Only theoretical radius.
какие преимущества у твердосплавного адаптера-удлинителя перед стальной державкой - меньше вибраций на больших вылетах или особой разницы нет?
Разница огромная, но и в цене. Вибрации намного меньше, особенно в углах.
4:46 what brand of this carbide tool holder? Thanks
AURA
Hello sir if any cnc machinist job please reply I am working in vmc in tool room our company make die for ola electric and I work in AWEA 2012 and makino machine thank you sir
They look like luigi
Just curious did you guys try the new toolpaths tech like dynamic milling in mastercam , if yes why do you still use the old school toolpaths in roughing ?
We use Cimatron. I don't know what dynamic milling is
@@CncFrezar it's Cimatron's Volumill. Its expensive, but you can buy it
I use dynamic (opti-rough) in mastercam for roughing with feed mills. But not because its quicker (because its not, iv tested) but because it manages tool load far better. Allowing me to push cutters more reliably and achieve far better tool life.
Also with standard roughing toolpaths we have to use corner rounding, which leave excess in corners but opti roughing doesn't need this so cuts more material.
@@wildin13 Hmm. Interesting. Thanks for the explanation. I did not find a similar strategy in the cimatron
@@yanivchen6401 This roughing takes about 10% of the total mold production. Finishing strategies are especially important on the mold, and cimatron has a lot of them
cześć
Yeah, the CNC programmer made a LOT of mistakes.
Probably scrap
Check plunge milling
no.