Ultimate Works TS (Reva’s Lightsaber) - Review
HTML-код
- Опубликовано: 3 июл 2024
- This is a 1:1 replica of Reva Sevander's lightsaber from the Obi-Wan Kenobi series. installed with Asteria Nano soundboards.
Use code: SABERLIFE for discount
thepachstore.com
0:00 Intro
0:18 Unboxing
1:16 Demonstration
3:42 Overview
4:18 Divide
6:42 Gallery
Hilt can be disassembled from a full circle saber to form 2 independent sabers.
Pixel RGB Colour Changing 2 x 1"x 28" // 72cm Removable blades.
Effects include; Blaster block, Flash on Clash, Tip Drag & Colour change.
High capacity removable 18650 Li-On battery
Easy USB Type-C access
Kitless Adjustable Rings with locking mechanism
Gesture controls to power on and off, swing on, roll on and off.
Individual blade swing on gesture control support
Individual Blade power off without affecting the other blade
Single motion bank switch
Supports Individual blade control and effects for each blade
Middle LED bar has automated colour matching
12 Preset banks, can be extended to 32 banks total
9 blade styles, 7 blade effects and 3 power up effects and 4 trigger effects. Total of 756 combinations
2W Speakers
Accepts fonts from Saberfont.com
Non Removable Chassis
Hilt Dimensions
Aluminum, Full moon Diameter 170mm, Hilt OD 40mm, ID 28mm
#ultimateworks #reva #thirdsister #revaslightsaber #thepachstore #obiwankenobi #unboxing #review 
Развлечения
This saber looks awesome! But I’m still more in love with the 2nd Sister design
It’s beautiful, I’m still on the fence over which one I prefer. If you can, get both! 😂😂😂
All the Inquisitor sabers are pretty cool, especially Marrok's now. The one thing that set this apart for me personally was the ability to split it into 2 sabers. Mine just arrived yesterday (Tuesday) and the Asteria board isnt as fancy as some of the higher end boards, but it's still pretty cool and looks awesome!
Another awesome fantastic review of reva lightsaber looks excellent has always keep collecting your light saber 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻may the force be with you all star wars fans the force is strong with this one saber life
This saber is awesome, especially that it splits into two halves, but I think it’s too big. The grand inquisitor one is much smaller. A smaller lightsaber that could still split into two would be the ultimate inquisitor lightsaber! Not to mention spinning :)
I haven't picked up this hilt yet, even though it does look awesome. I have the 2nd Sister and maybe 90% of the other UW/TPS hilts.
I'm really looking for a Graflex and "The Lord" (Count Dooku) to be updated released.
Mine just came in yesterday. I agree the short blades are enough, makes it easier to handle. Weird thing about mine is the "i am a Jedi like my father before me" sound font has a red blade style rather than the green! Going to have to learn how to correct that...and maybe do a couple other mods as most of the blades are red and Id like a variety. LOVE the Ahsoka theme and blade
I think this can all be changed in the Asteria settings. I probably changed my colour while playing around with it and saved it as a new preset! - such a great saber though!!! 💯
Amazing dobble lightsaber for inquisitor 😍😍🤗🤗🗡️🗡️🤞🤞
Definitely my favourite saber at the moment! 🔥
otro gran trabajo
OMG so coool
Their hilts are gorgeous. I have many of them. There are two major disadvantages, however. For every Asteria heart you buy, they put the same fonts on every saber, whether they are appropriate for a given saber or not. Second, contrary to what is advertised, adding fonts is not simply a "Drag and Drop" process. Although many font makers are now including Asteria versions of their fonts, when you add them, you still have to set blade effects manually for each font, e.g., you have to set them for blaster, clash etc. individually. This is quite tedious. You can only change colors on the fly, but not blade effects. Although in the newest software update (v. 109) you can now add preons, you cannot add pstoffs. Also music tracks are put in one folder in the root directory, not in individual fonts. To get to a particular music track you have to cycle through all the others. As a result, the Asteria board is far inferior compared to the GHV3 or the CFX. The Pach Store should make a board that does justice to their beautiful hilts.
To be honest, that is much the same as any custom saber brand. Other companies hilts usually come preinstalled with similar fonts unless specified at checkout and require the same about of work to install. Hopefully UW will constantly improve the Asteria firmware to include all the features seen in Proffie and GH boards but until then you get the benefit of paying less for it 😂. As a collector and owning over 100 Sabers you soon tire of these gimmicks anyway and just want a great looking hilt. I personally couldn’t care less about the font customisation as they are mostly just displayed and the Asteria’s offer enough for me.
@@saber_life >> require the same about of work to install.
I don't agree. For example, I have a number of CFX sabers and adding fonts can be done either directly on the SD card, or through the micro USB port if there is one. While I agree that most companies have a set of stock fonts, adding new fonts on say, CFX, is much, much easier. (Proffie is another story, which is why I don't buy Proffie sabers.) I've added fonts on Asteria, GHV3, and CFX. The last two are much easier than the Asteria.
>> I personally couldn’t care less about the font customisation as they are mostly just displayed and the Asteria’s offer enough for me.
Here I think we just have different tastes.
Thanks , we had got your demands ，Copy&Paste single font folder from other board to play will be included in next Asteria firmware version
@@UltimateWorksSabers Very nice. I see now the Asteria is updated to now use Proffie fonts. I haven't quite gotten the file banks set up correctly to add new fonts, but I did get a new Asteria Heart that has good fonts on it to use as a template.
I'm almost completed the process of updating all my Asteria equipped hilts. After that, I'm going to try to make my own font bank set ups.
This hilt.....i must have it 😂
Do it! 😂
It doesn't spin around by itself
No, that would be cool though! 😂
@@saber_life but if you modified it & you sent it off to a friend of yours they can make it work with the right parts & then you can reboot it on RUclips again to recommend me on your RUclips comment video my brother ?
@@saber_life thanks talk to you later it's late
are those the 28" blades it comes with? do you feel that is the "correct" length or feel that a different length would be better?
I purchased it without blades as I already had a few spare. I used 28” as anything larger would have hit my ceiling 😂.
@@saber_life is that a good length for the hilt, or would 32" be more apropos? It appears to be a pretty good ratio
@@doug896 I like this length for double bladed sabers tbh but your height might also effect your choice. I’m relatively short so this length suits me fine.
Which one is brighter ? Imperial workshop or UW?
Sorry I only have the UW version so I can’t compare them :)
The blades are included or you need to buy them as well?
The Pach Store website lists options to buy with or without blades.
How long did this take to arrive after you bought it?
Around a week or 2
@@saber_life that’s perfect
Can I add my own ignition sounds to this?
Yes
@@saber_life Could you explain how? Or make a video on it?
I was bummed to hear that Hasbro got pressured by stupid haters into not producing the saber, I'm glad somebody else took up the responsibility and did it.
Me too. This one is so much better in terms of build quality and features however, It was worth the wait! 🔥
What do you mean because people didnt like the character?
@@saber_life oh, I believe it.
@@josemartinezz9152 that was one of the factors contributing to the fact that Hasbro never made this lightsaber. The other reason being that they were having a hard time making it sturdy. However, I'm sure Hasbro could have made it started enough to use. But seeing as people complained about the character to no end because she's a woman or something stupid like that, Hasbro never made the toy.
@@Bored_Overthinker i mean me personally i didnt like the character at all it dont got anything to with race like people have told me i just didnt like the way she was written out but i loved the light saber i thought it was bad ass
How long did it take to come?
1-2 weeks :)
Maybe it’s a dumb question but how do you effortlessly go through all the fonts? Got mine today and I’m trying to figure out button controls just by watching ur video
@@craw_daddy5647 with the Asteria’s you just push the Aux (second button) down to cycle through the fonts
@@saber_life Thanks! What about the volume of the remotes. Is there a way to control that ?
@@craw_daddy5647 I think the new firmware allows for that :)