Thanks for sharing such great information. It is really helpful to me. I always search to watch the quality content and finally I found your vidoe. Keep it up, keep posting!
I’ve been surfing the RUclips for more than an hour today, yet I was unable to find any stunning video like this one. It’s alluringly worth it for me. Keep posting more such amazing videos.
I like the last tool. Unfortunately connections aren't made on a level surface with plenty room for the handles to extend. Most of the time your in a tight spot and space is at a minimum.
Do not use CPVC. It is garbage and will be brittle and cause problems quickly. Also, don't use sharkbites in areas that are not easily accessible. Personally, I think they are only good for temporary repairs. Also, always stub out in copper.
This is great advice. If you want brittle problematic plumbing in your home use CPVC. Its terrible there is a whole neighborhood in my city that used this material to plumb houses to save money. Believe me no one is saving money anymore and its ran in the slab. We have all kinds of weird unexplained breaks that we get calls for. Run
What are you hearing about CPVC. Has IAPMO decided to pull it out of the plumbing code or are you talking about the EPA and environmental issues that want to get rid of petroleum products?
Thank you so much for letting me express my feelings about your post. You write every blog post so well. Keep the hard work going and good luck. Hope to see such a beneficial post ahead too.
No 8...When the valve needs replacing is it just a case of cutting the pipe and then when you find the stub is too short just the small job of lifting the floor, toilet removal and extending the pipe, replace the floor and coving , reinstall the toilet and then fit a new valve?? Seems simple :0 :0 . But if in copper! remove the valve and replace with new!
I really love the content you posted, it is always super helpful and informative. Keep posting such an amazing videos, I love watching all your videos.
i guess Im asking the wrong place but does anybody know a trick to log back into an instagram account..? I somehow lost my password. I love any help you can offer me!
@Hassan August Thanks for your reply. I found the site through google and im in the hacking process atm. I see it takes a while so I will get back to you later with my results.
He glued the pipe push it on the valve then turned 1/4 turn false. Go back and read the can it says (push on while turning) not push then turn. Push pipe FULLY into fitting using a ¼ turning motion until pipe bottoms. Hay if you didn't take a plumbing class at least read the can slooowly. 🐌
The number 1 is not bad but not for professional man. Is very heavy and difficult to use. Specially on the inside of the corner.. and in the ceiling. Is better other types of pressmachine without arms.
That last tool. The copper press tool. Not very practical. Plumbing pipes are usually located in hard to reach/confined spaces. So this would not be able to do the job
This is supposed to be the best tools. The only decent ones in the list were the first 2. For the last one haven't they seen a press fit gun? Milwaukeemake a decent one granted it costs about £2000 gbp.
Who ever made this video isnt a plumber. If they were they would have mentioned pro press as it does black iron and copper press fittings. No pex expansion tool mentioned here, nor the seesnake. No moisture meter or thermal imaging. Honestly everything here is garbage.
Nice. Say what🤔 Were made in HIS image. HE made us with the power of free choice A good prayer: I'm a sinner JESUS please forgive me for all my sins I know you shed your Blood for me on the cross at Calvary. Thank you JESUS for my salvation and for shedding they Blood for me. I love you JESUS. Romans 10:5/10 ct...❤️k JESUSisLord!Amen... Amen.. If you'd like to call someone who cares 83 For Truth. bc you don't know when you'll die? .y r u hesitant. . . .
روعه تسلم ايدك يوسف للتشطيبات والديكورات الحديثة
Yes okay very very good thanks
Thank you too!
Хороший инструмент всегда «греет» душу)))
good experince
good experince thanks
Thanks
Welcome friends
Thank you
You're welcome
Where do we find that table at the end with the spinning vices.. that caught my attention.. the crimper is nice but I could use that table..
Thanks for sharing such great information. It is really helpful to me. I always search to watch the quality content and finally I found your vidoe. Keep it up, keep posting!
Great to hear!
I’ve been surfing the RUclips for more than an hour today, yet I was unable to find any stunning video like this one. It’s alluringly worth it for me. Keep posting more such amazing videos.
nice tooling
I like the last tool. Unfortunately connections aren't made on a level surface with plenty room for the handles to extend. Most of the time your in a tight spot and space is at a minimum.
A good plumber would never put cold water on the joint that’s just been solder
It will cause the lead to crack and spring leaks
I noticed that too. And I would put something under it as well. I didn't see no flux but maybe it's silver solder.
that stuff was awesome. The last one, I don’t know. Just because of the space you need to operate it.
l
Never seen a glue on shutoff - interesting.
I had a customer show me a really old tool set where you could make your own copper fittings out of copper pipe. It was badass.
Please share it, if ou find it. I am interested
Can anyone or someone please give me a link or website for the 1st tool fireproof soldering mat???
There is No links below.
Thank you
Do not use CPVC. It is garbage and will be brittle and cause problems quickly. Also, don't use sharkbites in areas that are not easily accessible. Personally, I think they are only good for temporary repairs. Also, always stub out in copper.
Perhaps, but many issues are garbage installation of this approved material!
This is great advice. If you want brittle problematic plumbing in your home use CPVC. Its terrible there is a whole neighborhood in my city that used this material to plumb houses to save money. Believe me no one is saving money anymore and its ran in the slab. We have all kinds of weird unexplained breaks that we get calls for. Run
1:49 CPVC will soon not pass inspection .. Do not use it if you don't have to.
What are you hearing about CPVC. Has IAPMO decided to pull it out of the plumbing code or are you talking about the EPA and environmental issues that want to get rid of petroleum products?
@@stevelopez372 code. when? who knows i'd bet b4 2030. becomes brittle even in dark dry areas.
Nice tool's
Excelent waooooo
👍👍👍👍👌👌👌👌
Thank you so much for letting me express my feelings about your post. You write every blog post so well. Keep the hard work going and good luck. Hope to see such a beneficial post ahead too.
You are so welcome!
Don't cool the pipe down with a rag solder won't bond right!
What is happens in case i like to replace a faulty valve at 3:04? Cut and cut and cut........
No 8...When the valve needs replacing is it just a case of cutting the pipe and then when you find the stub is too short just the small job of lifting the floor, toilet removal and extending the pipe, replace the floor and coving , reinstall the toilet and then fit a new valve?? Seems simple :0 :0 . But if in copper! remove the valve and replace with new!
I really love the content you posted, it is always super helpful and informative. Keep posting such an amazing videos, I love watching all your videos.
i guess Im asking the wrong place but does anybody know a trick to log back into an instagram account..?
I somehow lost my password. I love any help you can offer me!
@Reece Darwin Instablaster =)
@Hassan August Thanks for your reply. I found the site through google and im in the hacking process atm.
I see it takes a while so I will get back to you later with my results.
@Hassan August it did the trick and I actually got access to my account again. Im so happy:D
Thank you so much you saved my account :D
@Reece Darwin happy to help xD
He glued the pipe push it on the valve then turned 1/4 turn false. Go back and read the can it says (push on while turning) not push then turn. Push pipe FULLY into fitting using a ¼ turning motion until pipe bottoms. Hay if you didn't take a plumbing class at least read the can slooowly. 🐌
1st mistake, "DONT" put a wet sponge on the solder joint, let it cool naturally
Whomever used CPVC out of the floor should be fired and only allowed to sweep floors at Walmart.
Hi. Im from egybt
Who cares
Hello there!
The number 1 is not bad but not for professional man. Is very heavy and difficult to use. Specially on the inside of the corner.. and in the ceiling. Is better other types of pressmachine without arms.
1st mistake: cooling the joint with a wet rag! 🤦🏻♂️
shark bite stop
cut was anything but square
come on plumber2411
It seems almost impossible to find a video / advert without some form of distracting background noise now days, it sucks
That last tool. The copper press tool. Not very practical. Plumbing pipes are usually located in hard to reach/confined spaces. So this would not be able to do the job
They missed a good one . . . internal pipe wrenches. I have 4 different sizes.
u don't leave your toilet valve open till after you turn on the main leaking like a sive when you get back ha
Don't use rubber or neoprene seals instead of wax. Always use wax. The only place to use neoprene seals is on urinals.
And wallhung toilets
If you use Cpvc you will regret it its trash. I stopped using it in 1983 and its still junk today.
What are you s copper guy
where is link for tool# 10 ???
I can’t found the link too
Milwaukee rigid nibco and vieaga make a much better tool than iwiss and they are battery powered. Iwiss is trash
Uy lo último está chingon
NICE
Very nice
No one likes Allen key adjustment on tools. Every plumber I know carries a set of hole saws of the commonly used sizes.
This is supposed to be the best tools. The only decent ones in the list were the first 2. For the last one haven't they seen a press fit gun? Milwaukeemake a decent one granted it costs about £2000 gbp.
That is the most ridiculous hole saw contraption imaginable. I winced watching the guy turn that allen screw so close to the sharp part.
ربي يحفظكم
Real plumbers don't use sharkbites. At least those were glue style fittings but cpvc is trash
De baños no hay nada hay como dos tubito fue que vi de hierro
Goood
Who ever made this video isnt a plumber. If they were they would have mentioned pro press as it does black iron and copper press fittings. No pex expansion tool mentioned here, nor the seesnake. No moisture meter or thermal imaging. Honestly everything here is garbage.
No 8
Interasting
Nothing new about ratcheting pipe cutters.
Holo
Nice.
Say what🤔
Were made in HIS image. HE made us with the power of free choice
A good prayer:
I'm a sinner JESUS please forgive me for all my sins I know you shed your Blood for me on the cross at Calvary. Thank you JESUS for my salvation and for shedding they Blood for me. I love you JESUS.
Romans 10:5/10 ct...❤️k
JESUSisLord!Amen...
Amen..
If you'd like to call someone who cares
83
For
Truth.
bc you don't know when you'll die?
.y r u hesitant.
.
.
.
God is great
@@ZedIOptima Amen bro. Thanks for the reply
hnmmmm
F**k shark bites
Wer installiert so einen "Scheiß"?