You can try using Nissan march piston (72mm just plug n play) or (73mm need to rebore)..The pin size 18mm is similar to the stock one no worries...For turbo setup try using TD04L from subaru
Jakey, I just bought on Feb 21, 2022, a 2000 Daihatsu. the car does not have a Vin number all I have is the engine Chasis which is # M100S-013064, TYPE: GF-M100S -GPNF, Engine: EJ-DE, 989cc, Trim: F AS6. I checked everywhere on the web-based on the Chasis number but I did not find anything. I would like to know that is model, the specifications of the car. in order for me to buy all the parts the car needs. I am located in the Dominican Republic, thanks
Malaysian k-car fans.. I'm also own this this 660 engine but already swap with 1ltr EJDE turbo then I swap with TDOL turbo.. nice
You can try using Nissan march piston (72mm just plug n play) or (73mm need to rebore)..The pin size 18mm is similar to the stock one no worries...For turbo setup try using TD04L from subaru
Good job, really liked the music
thanks :)
Hi, may I know how much the NM torque to tighten the mainbearing and conrod bearing?
bearing cap - 59.0 ± 6.0
rod cap - 36.0 ± 6.0
pro.daihatsu.fr/Daihatsu/SAV/TECHNIQUE/MANUELS%20ATELIER/SIRION%20M100/9726/EM.PDF
@@Jakey032 tq very much bro
Going to be a weapon !
Jakey, I just bought on Feb 21, 2022, a 2000 Daihatsu. the car does not have a Vin number all I have is the engine Chasis which is # M100S-013064, TYPE: GF-M100S -GPNF, Engine: EJ-DE, 989cc, Trim: F AS6. I checked everywhere on the web-based on the Chasis number but I did not find anything. I would like to know that is model, the specifications of the car. in order for me to buy all the parts the car needs. I am located in the Dominican Republic, thanks
M100 Is Daihatsu Sirion. Hope this helps?
Hi. How long is the engine mileage before repair?
honestly I'm not entirely sure. but I think it's abit over 200k kms
Hi, what piston are you using? Did you lower the compression ratio by just grind off the extra material in the head or with thicker head gasket too?
standard piston. With the compression I didn't intend to lower it in purpose it will just be a result of the chamber shape change.
@@Jakey032 Can use nissan march 73mm if you wanna bolt on turbo.