We made flowers like this in the 70's, if I remember correctly we dipped them in liquid that stuck to the wire to make the petals and leaves. This way looks like fun too. 🌺
You beat me to it. I was born in '64 and distinctly remember my sister had one of those kits in the mid '70s. There were wires that you folded into an oval or round shape, dipped it into a thick, colored liquid, and it dried into an opaque pane of something similar to cellophane. And then there was thick green tape you wrapped the bottom with. I thought of it instantly when I saw the thumbnail for the video.
Seriously, you are so underrated. Your craftsmanship is always top quality. Your art is always stunning and I respect your level of dedication in everything you create. You deserve to be known!!!
Tú trabajo es excelente muy limpio y delicado, felicitaciones, muchas gracias por compartir tu saber hacer, por favor podrías traducir al español, agradezco mucho su atención, cuídense mucho Bendiciones 👍🍀🌞❤️
I tried uv resin because of your videos. I hope I can also try this out someday! The way you make things and the final results are always so dainty and beautiful. ❤
so pretty. i wanna try with acetate sheets. so stunning! i love poppy flowers but know if you cut them and put them in a vase they wilt too quickly. if i make them like this it will last forever.
Instead of cutting out each identical petal, it's easier and faster to buy a flower punch. They're made for card stock paper, but I doubt those thin plastic sheets are hard to punch through. Even just tracing the petal and cutting inside the lines would have been faster than using a box cutter inside that thing. The heat warps the edges anyway, so perfection wasn't needed. Just helpful tips for anyone wanting to make these, as they're probably the most delicate and gorgeous flowers that I've ever seen. Works of art and I'm in love with them!
I also tried flower punch. This is OPP film, not paper, and flower punch will not cut it. OPP film is very thin. It gets stuck in the gap between the blades. It is more fun to make a petal of your choice of heimon than a commercial petal shape.
@@nelconecoможно взять бумагу или картон для толщины, положить на нее пленку, а затем использовать специальный дырокол... Ещё можно напечатать сразу несколько лепестков на бумаге, положить сверху пленку и вырезать лепестки ножницами по контуру... Пленку приклеить к бумаге скотчем, чтобы пленка была надёжно зафиксирована...😊
I will never have the patience to make these myself but I loved seeing your process and it gives me ideas for other things I might do with OP film. Thank you for sharing! 💛☺️
after shaping the petals in the flame, I wonder if a small hole could be pierced in the base of each petal with a hot needle and the flowers assembled by very fine wire?
I use OPP, which is different from PET material, so I don't know more about it.Worbla TranspaArt is PET, right? OPP shrinks at 75-140 degrees Celsius. PET shrinks at 85°C I don't use PET because it is difficult to handle. I don't know about coloring either. Sorry.
I used a mold to make petals of the same die cut shape. Isn't it difficult to cut them into the same shape using scissors? Is there any other better way to do it?
![[Resin] Cute bottles with shrink plastic and alcohol markers [Design sheet]](http://i.ytimg.com/vi/nQvIeMoQpGc/mqdefault.jpg)
![[Resin] Cute bottles with shrink plastic and alcohol markers [Design sheet]](/img/tr.png)
![[Resin] Shrink plastic and colored pencils! DIY with free download design sheet [Teddy bear]](/img/1.gif)
We made flowers like this in the 70's, if I remember correctly we dipped them in liquid that stuck to the wire to make the petals and leaves. This way looks like fun too. 🌺
You beat me to it. I was born in '64 and distinctly remember my sister had one of those kits in the mid '70s. There were wires that you folded into an oval or round shape, dipped it into a thick, colored liquid, and it dried into an opaque pane of something similar to cellophane. And then there was thick green tape you wrapped the bottom with. I thought of it instantly when I saw the thumbnail for the video.
@@Marcus9638 Yup, that is exactly it. 👍🏻🌸fun times….🌼🌺
@@charlottesmom Indeed. I thank God all the time that I grew up in the 70s. It was paradise.
お花は今までもたくさん作られていますが、いろいろな方法で作るのでアイデアがすごいです
Seriously, you are so underrated. Your craftsmanship is always top quality. Your art is always stunning and I respect your level of dedication in everything you create. You deserve to be known!!!
花びらを一枚ずつカットすることを思いませんでしたが、とてもきれいです。 あなた達のビデオを見るのが大好きです。💗
Tú trabajo es excelente muy limpio y delicado, felicitaciones, muchas gracias por compartir tu saber hacer, por favor podrías traducir al español, agradezco mucho su atención, cuídense mucho Bendiciones 👍🍀🌞❤️
今回もすごく素敵でキラキラなお花達に感動しました😍
花瓶にさしても可愛いですが、ピアスにすると更に可愛いですね💕
CrystalDropのレジン液も使っていただけてとっても嬉しいです！
ありがとうございました😆
次回の動画も楽しみにしております💖
素晴らしいです♪
動画見てるだけで優しい穏やかな気持ちになれました😌
ネコちゃんのマッチ棒カンカン可愛すぎる🐈⬛
Браво!Восхитительно!У вас огромный творческий талант!
I tried uv resin because of your videos. I hope I can also try this out someday! The way you make things and the final results are always so dainty and beautiful. ❤
Omg!!! The amount of patience this requires ... such a kawaii craft!
Always so patient, such dedication to your craft! Stunning 💞
もう本当に綺麗😍
世界観大好きです💕
Absolutely beautiful and very intricate earrings.
Wow you are a
genius, your videos are a true
pleasure to watch
well made,and
relaxing,what a
patience, brilliant🤗
so pretty. i wanna try with acetate sheets. so stunning! i love poppy flowers but know if you cut them and put them in a vase they wilt too quickly. if i make them like this it will last forever.
Instead of cutting out each identical petal, it's easier and faster to buy a flower punch. They're made for card stock paper, but I doubt those thin plastic sheets are hard to punch through. Even just tracing the petal and cutting inside the lines would have been faster than using a box cutter inside that thing. The heat warps the edges anyway, so perfection wasn't needed. Just helpful tips for anyone wanting to make these, as they're probably the most delicate and gorgeous flowers that I've ever seen. Works of art and I'm in love with them!
I also tried flower punch.
This is OPP film, not paper, and flower punch will not cut it.
OPP film is very thin. It gets stuck in the gap between the blades.
It is more fun to make a petal of your choice of heimon than a commercial petal shape.
@@nelconecoможно взять бумагу или картон для толщины, положить на нее пленку, а затем использовать специальный дырокол... Ещё можно напечатать сразу несколько лепестков на бумаге, положить сверху пленку и вырезать лепестки ножницами по контуру... Пленку приклеить к бумаге скотчем, чтобы пленка была надёжно зафиксирована...😊
可愛い💕💕最初の「キュッキュッ」からこんな可愛いピアスができるなんて！お顔がパァっと映えそうな綺麗な色🙌左右違うのもまた良いなあ😊ネルコさん本当に繊細な作品ほど素敵に作るからすごいです☺️💕
You have an incredible amount of patience 🥰
I will never have the patience to make these myself but I loved seeing your process and it gives me ideas for other things I might do with OP film. Thank you for sharing! 💛☺️
とても美しい😊
so pretty, I would love to make lolly pops with petals like this/cherry blossoms
What a work of art! Love it 🥰
Stunning👏👏🌸🌷
Beautiful!
Wow stunning❤🎉. Also the rusty lake song omg
So pretty!!! ❤️❤️❤️👍🏻👍🏻👍🏻
Great peoject for stressed/anxious people , it will help shift their focus on something and stop thinking.
Wow Absolutely Stunning 👌👌👍
Beautiful work
とても地味で大変な作業ですが、花びら一枚一枚の味が素敵ですね。
Oh my the patience you need
凄いですねとしか言いようが
ありません👍👍👍💖💖💖☺️☺️☺️
love it!
Absolutely fabulous!
Opp 필름 가장자리 정말 숨막히는 작업이네요.끝까지 너무 잘 봤어요.완성도 높은 수제 귀걸이가 만들어졌네요!!❤
Amazing and lovely piece of art! Congratulations!😍😍😍
Todo muy bello EXCELENTE MYSICA😊
Absolutely stunning 😍😍😍
Woooow! Stunning
Потрясающе! ❤
Very pretty!
😮❤❤❤super cute flowers. Thank you🙏
Love these!!!
Ah so satisfying to watch your video
😌💙🤍
Truly beautiful ❤
after shaping the petals in the flame, I wonder if a small hole could be pierced in the base of each petal with a hot needle and the flowers assembled by very fine wire?
Из пластиковой бутылки вырезать целый цветок,так прочнее.❤Я тоже делала веночек на волосы.Красиво !❤❤❤
Super hermosos !
Wow!!😮✨😍
The earrings are very beautiful. Delicate and feminine. I'm curious to know how long it took you in total to make all of the lovely flowers shown.😊❤
It took me a day to make all of them.
@nelconeco I believe it. It looked like an intricate process. They turned out gorgeous, though. 💝💕
Absolutely beautiful 🥂❤️⚘️
Thank you so much
Очень красиво ❤❤❤❤
Wow, i could try that
Awesome ❤
انها رائعه😍😍
ザ.プロの仕事ですねー♪これが【プロ】と素人の違いなんだなぁ〜と思いました。私もまだまだ、素人！！これから…もっともっと、頑張ろうと思います☺️
蝋燭のとことか、、めっっちゃ繊細な作業ですね、、！尊敬します！！
❤ WOW 😲 is amazing 😍
Excellent 👏👏👏
Маркер? Он же пачкается😮😮😮
Попробуйте лак для ногтей😊
Hi! What is the plastic white tube to wrap the wire around called? Thank you!!!!
Spatula for clay☺️
Ooh, one could make bigger ones from Worbla TranspaArt ..oor just use a heat gun and plexiglass? Would alcohol inks work on them or is dye needed?
I use OPP, which is different from PET material, so I don't know more about it.Worbla TranspaArt is PET, right?
OPP shrinks at 75-140 degrees Celsius.
PET shrinks at 85°C
I don't use PET because it is difficult to handle.
I don't know about coloring either. Sorry.
めっちゃ綺麗ーദ്ദി ˃ ᵕ ˂ )
いつも思いますがこういう表現よく思いつきますよね〜凄い( و⸝⸝⸝ •̀ω•́⸝⸝⸝)و ̑̑
Would have been nice to see the earrings on some ears.
♡ Hermoso
Is that lamp ?
Lamp ?
🧐
ماهي المادة السائلة المستخدمة لدهان الزهرات
وما إسم الورق الشفاف المستخدم في صنع بتلات الزهور
فيلم OPP ومحلول الراتنج.
❤❤❤
제가 본 첫 영상이에요. 너무 멋지네요. 구독했어요
Wouldn’t scissors be easier?
I used a mold to make petals of the same die cut shape. Isn't it difficult to cut them into the same shape using scissors?
Is there any other better way to do it?
It's acetate?
Oriented Polypropylene
i really want to try to make petals with acetate sheets but im worried that melting the plastic will be toxic😓
The petals are not burned by candlelight. Just apply heat.
And ventilate.
デザインカッターの方が使いやすくないですか？人差し指が痛くなりそう😢
デザインカッターも使いやすいですね。カッターなのでどちらも沢山カットしてると指が痛くなりますね🥲カッターは疲れます。
Sao không dùng kéo cắt cánh hoa ???
Description on materials please
OPP film
UV LED Resin
Wire
Oh my, I’ve never been this early in this Chanel before :0 hi! 🩵
New subscriber here 👋
推しの写真を入れる栞サイズのキーホルダーを作りたいんですが、どこにもそのサイズのキーホルダーが売っていません😢ネルコネコさんならどんなキーホルダーを作るのか見てみたいです！
👋👋👋👋👋👋❤❤❤❤❤
Girl get a tiny rotary cutter! Or a sharper xacto you poor girl this must have taken forever!
Very pretty and lovely, but i do not recommend inhaling fumes of melted plastic. Smoking is less health damaging.
👍＾＾