Hola, muy buena explicación, muchas gracias por enseñar. Realice los pasos pero tengo el inconveniente que me sale una linea blanca en la hoja impresa, me podrías guiar de como puedo solucionarlo? gracias.
Hello Minnie! 1) The white powder is a lubricating powder for the OPC Drum. If you don't have that kind of product you can use black toner instead. 2) The wipe I use is an ordinary kitchen paper towel. It's used only dry. If you need harder cleaning of some parts like PCR or other rollers, you have to use proper cleaning solvent with a clean cotton cloth. Thanks a lot for your interest! You you have further questions dont't hesitate to ask ;)
Bhajan mere ko photo bahut sari ho gai hai iska blade ka problem a raha hai sirf blade ka jo carbon roti hai yah Kahan se Mil jaega meherbani Karke Hogi aapki
Hello my friend. Unfortunately I don't have such a consumable to tell you what is the toner model. You can try with toner for entry level models of Pantum, but it is at your own risk.
Hello friend! You can check with your local supplier what toner powder is compatible with your cartridge. I know my colleagues use Samsung toner on Pantum cartridges, but it is not for all models.
I haven't seen phisically pb211, but if it is the same cartridge and fits in the printer you can change the chip only. But if only it is the same cartridge with pd219
@@MrPrintGuyDIY so where do you get a chip? my cartridge says toner life end but i barely used the printer, so it prints 100 pages?? just trying to get more life out of mine.. so i cannot reset the cartridge without replacing the chip? thanks!
@@margaritagirl2629 you can find a chip for your cartridge from local suppliers. Check for them on the internet. I am sure you will find it. Good luck!
Dùng giấy lau mạnh vào các thanh trống xanh và caosu như vậy thật liều mạng, dễ gây xước các thứ đó. Vả lại hướng dẫn thì nên kèm thuyết minh, không nên bí ẩn như vậy.
Yes you are right about the wipes. I use high quality soft wipes and wipe aou the drum surface carefully. About the commenting - from some time after I added comments to all of my videos ;)
Muy buena instrucción y valedera, Gracias.
Hola, muy buena explicación, muchas gracias por enseñar. Realice los pasos pero tengo el inconveniente que me sale una linea blanca en la hoja impresa, me podrías guiar de como puedo solucionarlo? gracias.
Great job! Thank You very much!!!
Que tipo de toner lleva ese cartucho ?
Assalam walekum bhai jaan main Hun Hyderabad se latifabad Hyderabad Scottish ka mujhe blade batate Hain kahan se milega
Bom dia, dá para recarregar com pó Samsung?já que o pó pantum não está disponível na Venezuela
Hello friend! You can use Samsung toner powder for Pantum cartridges.
Muito grato pelo vídeo!
Me ajudou muito! Ganhou mais um inscrito!!😀
Hi,
1) What kind of white powder did you sprinkle on?
2) What kind of wipe did you use?
Thank you for the great video!❤
Hello Minnie!
1) The white powder is a lubricating powder for the OPC Drum. If you don't have that kind of product you can use black toner instead.
2) The wipe I use is an ordinary kitchen paper towel. It's used only dry. If you need harder cleaning of some parts like PCR or other rollers, you have to use proper cleaning solvent with a clean cotton cloth.
Thanks a lot for your interest! You you have further questions dont't hesitate to ask ;)
@@MrPrintGuyDIY I want to thank you. You have been so kind in sharing your skills in these videos. Great help. Saves us a lot of money.
Thanks for your kind words! I am glad I can help people :)
The chip you have replaced is supplied with the powder ink? Thanx
The chip is sold separately. You can order it from a local supplier or on internet. Good luck!
Bhajan mere ko photo bahut sari ho gai hai iska blade ka problem a raha hai sirf blade ka jo carbon roti hai yah Kahan se Mil jaega meherbani Karke Hogi aapki
Hello friend! I get spare parts for the cartridges from the local market. You can also try with ebay, aliexpress, etc. Good luck!
que es el polvo blanco que le pone antes de armarlo de nuevo? gracias
El polvo blanco que uso es polvo de tambor OPC. Si no tienes ese polvo, puedes usar tóner en su lugar.
@@MrPrintGuyDIY muchas gracias 🫂
You dont have to take the whole lot apart..just remobe the end where the nylon plug is..refill..replace plug and chip ....
Thank you. And what happens if do not clean the old toner and pour a new one?
If you don't remove the old toner it's possible to get printing defects because of different toner particles.
@@MrPrintGuyDIY clear, thanks.
Do l need to change the chips also?😊
Yes, you have to change the chip every time you refill the cartridge. Otherwise the printer will continue showing an empty toner message.
sir which type of ink use in PANTUM P2518 single function printer? because I have no idea about ink for this printer.
Hello my friend. Unfortunately I don't have such a consumable to tell you what is the toner model. You can try with toner for entry level models of Pantum, but it is at your own risk.
in my toner pc210E should i use liquid or powder ink?
You have to use only toner powder with your cartridge. Don't use ink.
@youngtraderfx6646 you're welcome 😀
Which toner I can use except pantum toner
Hello friend! You can check with your local supplier what toner powder is compatible with your cartridge. I know my colleagues use Samsung toner on Pantum cartridges, but it is not for all models.
If I buy the pb211 but my printer use pd219, how can I do to fix it other than return to the seller?
You have to use the right chip model for your printer, otherwise the printer won't initialize the cartridge.
@@MrPrintGuyDIY it means I can use a pd219 chip in pb211 cartridge to make it work
I haven't seen phisically pb211, but if it is the same cartridge and fits in the printer you can change the chip only. But if only it is the same cartridge with pd219
what toner refill are you using?
Do you mean the toner powder type? I use dedicated toner powder for Pantum bought from local retailer.
Is it necessary to change the chip?
Yes, you have to change the chip. Otherwise the printer will raise an error for empty cartridge.
@@MrPrintGuyDIY so where do you get a chip? my cartridge says toner life end but i barely used the printer, so it prints 100 pages?? just trying to get more life out of mine.. so i cannot reset the cartridge without replacing the chip? thanks!
@@margaritagirl2629 you can find a chip for your cartridge from local suppliers. Check for them on the internet. I am sure you will find it. Good luck!
Great job! Thank you!
how I can buy the chip?
Hello friend! Please check the local IT supplier for this chip. If it's not on stock you can obtain it from ebay, aliexpress ...
where can i order the black powder ink
Hello friend. You can buy the toner powder from a local retailer. You can search with google for it ;)
Thanks
thanks..
Hada
Dùng giấy lau mạnh vào các thanh trống xanh và caosu như vậy thật liều mạng, dễ gây xước các thứ đó. Vả lại hướng dẫn thì nên kèm thuyết minh, không nên bí ẩn như vậy.
Yes you are right about the wipes. I use high quality soft wipes and wipe aou the drum surface carefully. About the commenting - from some time after I added comments to all of my videos ;)