Advantages of EZ~Brush® Vac Bag Silicone Vacuum Bagging Material
HTML-код
- Опубликовано: 5 окт 2024
- www.smooth-on.c... to learn more about vacuum bagging.
Making Re-usable Vacuum Bags Offers Several Advantages;
• Reusable Bags Reduces Labor Costs Up To 90%
• Reusable Bags Can Be Used To Quickly Produce Many Parts
• Easy to Mix and Apply
• EZ~Brush® Bags Resist Attack from Chemically Harsh Resins
• Better Heat Resistance up to 500°F / 260°C
• Non-hazardous; No Odor
• Using EZ~Brush® Bags Are Eco-Friendly; Reusable Bags Eliminates Bag Film Waste
Make It Now! with Smooth-On
www.smooth-on.com/
/ smoothon
/ smoothon
www.google.com/...
~-~~-~~~-~~-~
Adult Supervision Required
Keep Out Of Reach Of Children
~-~~-~~~-~~-~ - Хобби
It's removed as stated in the video, you can still see the depressions it made in the finished resin.
That's awesome stuff. Can I buy in the UK for small parts? Thanks.
Certainly! Contact the folks at Bentley Advanced Materials - Benam.co.uk
How many parts will this make assuming no handling damage?
If the vacuum is on during the cure, what stops the resin from flowing out of the part and into the pump?
To address your concern, please contact Smooth-On technical support for assistance with your specific application. Have a great day!
Muy buen producto.Quiero comenzar un projecto,y necesito información del producto derma o brush y espuma foam.
This seems to be promising. I suppose if you use infuse epoxy using this kind of bag, it has some transparency to see the progress of procedure under the bag right?
The few that I have done showed very nicely, but we dye our resin black so that would help.
This looks like exactly what i need, so i don`t have to get the giant spray gun. Do you have to put releasewax on the inside for a carbon/epoxy part? Is this bag suitable for infusion or RTM? Any european distributor?
Do I need a mood release
Hello, It will depend. This is a good question for our tech support team, can you send them a ticket here? www.smooth-on.com/support/ticket/add/agree/ Thanks for watching!
wow. were did the peel ply and breather fabric go right before the demolding at 8:47 ?
The peel ply was there when they popped the bag, but they removed it off camera for the pulling of the part.
"Apply vacuum ... 158 kPa"? What school did you finished buddy.. Absolute Vacuum is 1 bar = 100 kPa. Nice technology, and would be even better if it had integrated breather.
Gregory F Apply vacuum 158kPa basically means apply suction up to 158kPa. Only a nerd like you couldn't get it.
jacky sew
Lol, another badass ninja in pysics.. Usually, it's not a big deal to make a mistake, but you're just not well educated and not well mannered. The maximum achievable "suction" at normal atmospheric pressure is -101.3 kPa. At this pressure there are not any atoms which could interact with each other and produce any pressure. If someone other than this moron would like to improve their knowledge about vacuum, I recommend site: www.fram.nl/workshop/vacuum/index.htm
You all missed "23 psi"....vacuum is measured in inches of mercury not psi.
Approximately how thick did the bag in the video end up? Was it as little as 2 mm? Closer to 3 or 4 mm? Thicker than that?
***** I would take a look at Smooth-On's Technical Bulletin, as it provides the recommended thickness and coverage rate. www.smooth-on.com/tb/files/EZ_BRUSH_VAC_BAG_SILICONE.pdf
Stephen Westbury, thank you for the reply and the link. That does indeed answer my main questions. I had looked at a whole bunch of stuff on the Smooth-On website but had not run across that info. Also, EZ-Brush was not listed in the Material Calculator.
***** It more than likely because it is a brushable material and is harder to figure out the exact math. There are simply too many variables.
It depends on where you measure as some reinforced sections are thicker. I would think 2-4 mm would be an average bag thickness for production infusion.
Muy buen producto.Quiero comenzar un projecto,y necesito información del producto derma o brush y espuma foam.