excellent even if with no audio. I had a Racing 3 and surprisingly the cassette spline started to move axially. In 3 seconds I retightened it, paying attention to the correct "lock" direction
The tool is a bearing press and is kind a expensive tool for the different bearings adapters that came with the tool !! Some bearing that are cheap just came alone with no adapter for any bearing sizes..... important thing that the video missed is the white grease in all the internals of the hub .. most campy need that . Cheers
Vorrei sapere se gli attrezzi usati sono specifici campagnolo per questa operazione (eventuali che codici hanno) o se sono generici per il mondo delle biciclette e come si chiamano, grazie
Gentilmente, è possibile conoscere ove reperire gli attrezzi per la rimozione e il rimontaggio (pressa), delle calotte ? Grazie. Altrimenti il video serve ben poco a chi vuole procedere da se, poichè i meccanici sanno come effettuare l'operazione peraltro non complicatissima.. Grazie.
I have a set of fulcrum 1s (2005-2009) with worn out rims... i was wondering if they are interchangeable across the range, such that i can just rebuild them with current fulcrum racing 3 rims? if i want to keep the existing hubs and aerospokes?
Buongiorno Luciano, se possiede delle Racing Zero la procedura è la stessa. In caso necessiti di ulteriori info la prego di scrivere a info@fulcrumwheels.com. Grazie!
Freehub comes off easily but i cannot having undone the non-droveside collar get the nut off in order to get the axle out whatever i do. What am i doing wrong? Bolt now rounded from the effort. Have i just fucked my wheel??
the problem starts when one of the bearing is damaged. you can't get spare parts cause their supposed authorized dealer don't have them. The LBS (Decimal Cycle Supply in Quiapo) i bought from even advised me just to get another wheelset.
Yes Fulcrum Racing three has a freehub for Shimano & Campagnolo. You can download parts lists for these wheels online at Fulcrums website and then go looking for bits you need locally or internationally.
The video posted by Cycling Weekly is a million times better than this garbage video for anyone looking to service their wheel. Fulcrum is kind of a shit company, you'll get more help from Campagnolo as it's basically the same hub.
excellent even if with no audio. I had a Racing 3 and surprisingly the cassette spline started to move axially. In 3 seconds I retightened it, paying attention to the correct "lock" direction
Worked great thank you. My hub was a bit loose from day one. Surprised to find loose bearings rather than cartridge. Repacked and ready to go.
Great Wark Sir 👍
Le mie Fulcrum anni i mozzi in carbonio e le sfere ceramica molto performanti comunque bel video
sulle mie Fulcrum zero resing posso montare i copertoni tubles grazie
@@lucianozanichelli6078 oui j ai mis des pneus pirelli p zero en 26 tlr et ça marche bien
Hi, great video , can you tell me what is the name of the tools you used?
are they campanolo ?
Thanks.
The tools on the 2:08 minute is a bearing extractor !!
The tool is a bearing press and is kind a expensive tool for the different bearings adapters that came with the tool !! Some bearing that are cheap just came alone with no adapter for any bearing sizes..... important thing that the video missed is the white grease in all the internals of the hub .. most campy need that . Cheers
no need to put grease on the bearings before sealing it again?
Vorrei sapere se gli attrezzi usati sono specifici campagnolo per questa operazione (eventuali che codici hanno) o se sono generici per il mondo delle biciclette e come si chiamano, grazie
Gentilmente, è possibile conoscere ove reperire gli attrezzi per la rimozione e il rimontaggio (pressa), delle calotte ? Grazie. Altrimenti il video serve ben poco a chi vuole procedere da se, poichè i meccanici sanno come effettuare l'operazione peraltro non complicatissima.. Grazie.
My rear wheel moves left and fight, di i have to tight the black threated Cup? Is enough?
Although a few years ago, could someone please, tell me which tools are in use? Thank you.
The tools used for this process please.
3mm, 5mm hex keys,screwdriver,hammer,hub puller,bearing press,and a spanner
@@Thecrazyvaclav in reference with bearing Press and pull out tool, Is possibile to buy general tools? Are the dimension needed available?
what kinds of grease should i use?
I have a set of fulcrum 1s (2005-2009) with worn out rims... i was wondering if they are interchangeable across the range, such that i can just rebuild them with current fulcrum racing 3 rims? if i want to keep the existing hubs and aerospokes?
My R3 backwheel has stopped spinning "free". What to replace or grease up?
Would it have killed you to do a voiceover?
Con mozzo in carbonio e sfere inceramica come si smontano?
Buongiorno Luciano, se possiede delle Racing Zero la procedura è la stessa. In caso necessiti di ulteriori info la prego di scrivere a info@fulcrumwheels.com. Grazie!
Freehub comes off easily but i cannot having undone the non-droveside collar get the nut off in order to get the axle out whatever i do. What am i doing wrong? Bolt now rounded from the effort. Have i just fucked my wheel??
the problem starts when one of the bearing is damaged. you can't get spare parts cause their supposed authorized dealer don't have them.
The LBS (Decimal Cycle Supply in Quiapo) i bought from even advised me just to get another wheelset.
I have a racing 3 with a campy free hub body, can i convert it to a shimano 11 speed by just swapping the freehub body splines? Thanks
Yes Fulcrum Racing three has a freehub for Shimano & Campagnolo. You can download parts lists for these wheels online at Fulcrums website and then go looking for bits you need locally or internationally.
plastic a bit weak but still work .
I might have put grease on the barring, but that’s just me. Still, thanks.
Man the no sound is killing me, just painful.. Some background music would have been great at least.
2:08 need tool
I think only bike shops can do this... We mere mortals do not have the tools.
You need to up your game them homes. This is basic stuff for even a recreational cyclist.
veramente......manca na parola........non se kapish nient
oh no!
@MrAngry27 sell it and buy other brand.
our dealer sucks in the philippines
The video posted by Cycling Weekly
is a million times better than this garbage video for anyone looking to service their wheel. Fulcrum is kind of a shit company, you'll get more help from Campagnolo as it's basically the same hub.