Best video on RUclips on this topic so far. I am not a builder but I have provided manual labor at building sites. As I have a General Maths background, it was not difficult to follow and understand your presentation. However, I am confused why you used 8.8m instead of 8.35m ridge length in calculating Area 2.
Never Done much roofing but some how I followed this better than most English versions, waited for I English interpretation and followed it. I tell you what if I was you I'd do a full English version on how to get a full hip roof with calcs and Jack's, very good on you even in 2 languages 10 out 10.
വീശ്യകർമ്മ ആചാരി മരപ്പണിക്കാർ ഈ മെത്തേട് ഒന്നും ഉപയോഗിക്കാതെ മുഴക്കോലിൽ അളവ് ഉപയോഗിച്ച് കളം വരക്കുക എന്ന ട്രീക്ക് ഉണ്ട് . ഒരു മുടിനാരിഴ അളവ് തെറ്റാതെ കൃത്യമായി ചെയ്യും. ഇന്നത്തെ തലമുറക്ക് ആ അറിവ് പകർന്ന് കീട്ടിയവർക്കേ അറിയൂ. പതിനായിര കണക്കിന് വർഷം പഴക്കമുള്ള ക്ഷേത്രേ നീർമ്മിതികൾ കണ്ടാൽ മതി.
Very informative video thank you. Was the area of the roofing tile effective tile area? If effective tile area isn’t given, only manufacturers dimensions are given, how should the overlaps be accounted for?
It depends on the material you are using. Normally we will be calculating the roof area. Depending on the percentage of overlap specified per unit area,
Wow. May God bless you richly sir. I have been researching to find something like this. Thank God I found this. Sir, is the formula for rise (1/3 of span) constant? Thank you.
The value of rise as 1/3 of span is commonly adopted in indian conditions, where intermittent rain persists. Such a slope is necessary for fast draining of rainwater. The maximum slope is limited to 30 degree to avoid effect of Wind force over the roof. ( For rise = 1/3 span, slope is approximately 33 degree). In countries where snow fall exist, much more steeper slope is needed to avoid accumulation of snow over the roof. Conclusion **Rise = 1/3 span is a general condition in India where there is rain intermittently. **Slope of the roof (or Rise of the roof) can be decided based on the environmental conditions of the locality such as wind force, snow fall, rain etc.
Since It was made for helping diploma students in Polytechnic College of Kerala when the Government suspended regular classes due to Covid-19, I had no other choice than to take classes in mother tongue.
Notching of rafters are not considered during the estimation since it is of negligible quantity. Notching positions are provided as per the technical drawings and depending on the type and size of members used. You might not be finding some data in this video because this video is made for diploma students for study purpose based on the book QUANTITY SURVEYING by B.N. Dutta. So, in this video I strictly follow the text book and depth of explanation is based Diploma syllabus. Please ask your doubt in detail. I shall try to give you the explanation.
ഡിപ്ലോമ സിലബസ് പുസ്തകത്തിലെ ഒരു ചോദ്യം ആണ് ഇതിൽ വിവരിച്ചത്. Covid സമയത്ത് ഓൺലൈൻ ക്ലാസ്സിന് വേണ്ടി എടുത്തത് ആയിരുന്നു. പരീക്ഷ ആവശ്യങ്ങൾക്ക് ഉള്ള ഭാഗം ആണ് പ്രധാനമായി ഉൾപ്പെടുത്താൻ ശ്രമിച്ചത്. ബാകി ഓൺലൈൻ ലൈവ് ക്ലാസ്സിൽ discussion.
this is the best illustration so far
Good explained
Super Explanation , I don't know Malayalam, your explanation is very clear , Super Brother . Madhav From Hyderabad Telangana
wow, am not indian bt i have understood every.....thank you
Best video on RUclips on this topic so far.
I am not a builder but I have provided manual labor at building sites.
As I have a General Maths background, it was not difficult to follow and understand your presentation.
However, I am confused why you used 8.8m instead of 8.35m ridge length in calculating Area 2.
It's a mistake actually. 8.35 is the correct value.
@@mohamedrahees1464 I thought as much. Excellent video all the same.
ഒരു ഇഷ്യൂ സോൾവ് ചെയ്തു തരുമോ? 😊@@mohamedrahees1464
Never Done much roofing but some how I followed this better than most English versions, waited for I English interpretation and followed it. I tell you what if I was you I'd do a full English version on how to get a full hip roof with calcs and Jack's, very good on you even in 2 languages 10 out 10.
high talented man thank you for your clear EXPLANATION SINCE IAM NOT AN INDIAN CITIZEN BUT COMPLETED UNDERSTOOD WHAT YOU HAVED KEEP GOING
വീശ്യകർമ്മ ആചാരി മരപ്പണിക്കാർ ഈ മെത്തേട് ഒന്നും ഉപയോഗിക്കാതെ മുഴക്കോലിൽ അളവ് ഉപയോഗിച്ച് കളം വരക്കുക എന്ന ട്രീക്ക് ഉണ്ട് . ഒരു മുടിനാരിഴ അളവ് തെറ്റാതെ കൃത്യമായി ചെയ്യും. ഇന്നത്തെ തലമുറക്ക് ആ അറിവ് പകർന്ന് കീട്ടിയവർക്കേ അറിയൂ. പതിനായിര കണക്കിന് വർഷം പഴക്കമുള്ള ക്ഷേത്രേ നീർമ്മിതികൾ കണ്ടാൽ മതി.
അതെയതെ. ഇന്ത്യൻ വസ്തു വിദ്യാ.. 👍
Mathematics അറിയുന്ന വർക്ക് ഇത് എളുപ്പം മനസ്സിലാവും thank you
Good class..... Thank u so much....
Value ഓഫ് ലെങ്ത് - value ഓഫ് width = Ridge length....
15.05-6.7=8.35 simple
Yes.. This is a basic step for students. And they will skip all these steps in the next problem
Ithil jack rafter nte no: 7 alleh kittiyadh but estimation il adh 8 ahnallo edukkunnath?🤔
Thank you
We want more estimation vedios
Sprb
Very informative video thank you. Was the area of the roofing tile effective tile area? If effective tile area isn’t given, only manufacturers dimensions are given, how should the overlaps be accounted for?
It depends on the material you are using. Normally we will be calculating the roof area. Depending on the percentage of overlap specified per unit area,
Wow. May God bless you richly sir. I have been researching to find something like this. Thank God I found this.
Sir, is the formula for rise (1/3 of span) constant? Thank you.
The value of rise as 1/3 of span is commonly adopted in indian conditions, where intermittent rain persists. Such a slope is necessary for fast draining of rainwater.
The maximum slope is limited to 30 degree to avoid effect of Wind force over the roof. ( For rise = 1/3 span, slope is approximately 33 degree).
In countries where snow fall exist, much more steeper slope is needed to avoid accumulation of snow over the roof.
Conclusion
**Rise = 1/3 span is a general condition in India where there is rain intermittently.
**Slope of the roof (or Rise of the roof) can be decided based on the environmental conditions of the locality such as wind force, snow fall, rain etc.
@@mohamedrahees1464
Thank you very much for the explanation, Sir.
സൂപ്പർ
#Perfect and appreciated..kindly can you share how to find no. and size for purlins/batterns.
Size of purlins are usually vary from 38mmx25mm to 50mmx25mm.
No and length depends on the size of tile you are using and it's lapping length.
@@mohamedrahees1464ഒരു ഇഷ്യൂ സോൾവ് ചെയ്തു തരുമോ?
CAN YOU MAKE A PDF BOOK ABOUT ROOF CALCULATIONS
20+20+1+1=42 is by new construction..... Older Carpendery calculation is different....
Plz make a video in English also
കുയ്യടി വരുന്നതിന്റെ ഏരിയ എങ്ങനെ കാണും? ഇത് ഒറ്റ റൂഫ് അല്ലെ
Span ന്റെ മൂന്നിൽ ഒന്ന് എന്ന് പറഞ്ഞാൽ Eve Span ന്റെ ആണോ എടുക്കേണ്ടത്.
Yes,
Eave span is considered for calculating total rise of roof.
Can someone the roof area working out in English can't understand a singe word😂
Common Rafter length കൂടുതൽ വേണമെകിൽ എന്താ ചെയ്യുക?
Eave projection increase cheyyanam
It would have been much better if you could have explain in English or hindi
Since It was made for helping diploma students in Polytechnic College of Kerala when the Government suspended regular classes due to Covid-19, I had no other choice than to take classes in mother tongue.
ഇ ഫോട്ടോ കാണിച്ചത് പോലെ 9 മീറ്റർ നീളം 9മീറ്റർ വീതി . ഓട് ഇല്ലാതെ എത്ര പൈസ വരും
How to measure hip roof square feet
Roof area consists of two triangles on hip ends and two trapizium on either sides of roofs
Find the area of both plains to find total roof area.
Place give details with drawing
what about notching?
Notching of rafters are not considered during the estimation since it is of negligible quantity.
Notching positions are provided as per the technical drawings and depending on the type and size of members used.
You might not be finding some data in this video because this video is made for diploma students for study purpose based on the book QUANTITY SURVEYING by B.N. Dutta. So, in this video I strictly follow the text book and depth of explanation is based Diploma syllabus.
Please ask your doubt in detail. I shall try to give you the explanation.
@@mohamedrahees1464 thank you sir
Hi sir oru dout undarnnu reply tharumo
9020078866
പട്ടികയെ പറ്റി പറയുന്നില്ലല്ലോ (reapers required qty
ഡിപ്ലോമ സിലബസ് പുസ്തകത്തിലെ ഒരു ചോദ്യം ആണ് ഇതിൽ വിവരിച്ചത്.
Covid സമയത്ത് ഓൺലൈൻ ക്ലാസ്സിന് വേണ്ടി എടുത്തത് ആയിരുന്നു.
പരീക്ഷ ആവശ്യങ്ങൾക്ക് ഉള്ള ഭാഗം ആണ് പ്രധാനമായി ഉൾപ്പെടുത്താൻ ശ്രമിച്ചത്.
ബാകി ഓൺലൈൻ ലൈവ് ക്ലാസ്സിൽ discussion.