Loves the videos yall put out. Been diving for just over a year and finished AOW about 3 months back. In selecting and setting up new gear, through reviewing and practicing movements, on to continuing continuous education I can't state it enough how great these videos can be. Yall keep it crisp, direct, and too the point without any of the fluff. Love it!
As new divers, we have learned so much from your very well made videos that are infomative and to the point, and look forward to every new video you upload. We absolutely LOVE them! They are SO good! 🤿👌
Gracias babbette y Peter, por ponerlo en español, estoy en Tenerife y no he podido bucear con ustedes por el idioma, muchas gracias por tener en cuenta el castellano
Awesome work as always!! I love the fact that you suggest doing this in the water, I always without exception noticed that something has changed after jumping in.. nevermind the mess with remembering each step so this top to bottom right to left logic really simplifies all this. I'm ever so grateful for your help and its a standout contribution for the dive community for sure.
Very good Video as always but short question, isn't it better to check things like weights, buckles, mask, suit and air value open before I enter the water?
Thank you for raising such a great question! We approach this slightly differently because our system simplifies much of what you mention. Since we don’t advocate the use of removable weights, your required weight is integrated into your backplate or weight pockets on the cam bands during initial assembly, so there’s no need for additional checks. Buckles are even easier; with DIR equipment’s continuous webbing setup, the only buckle (on the waist strap) is naturally checked as you put on your gear. For the mask, as long as you have it with you, there’s no need to check it before entering the water - you’ll address it properly during the equipment match sequence covered in the video. Lastly, the valve should already be opened when assembling your gear. If not, the issue will become evident during the pre-dive check in the water as you interact with your BC and regulator.
@flowstatedivers Thank you very much for your detailed answer which gives a better understanding in your DIR philosophy. I'm just a normal recreational vacation driver, who likes to become better and likes to improve. So what a great Video would be " Why I should consider applying DIR to my diving even as a recreational vacation standard diver" In your Videos we twin set up, side mount, cave diving and normal ones like me asking themselves, why should I also do this. I have a hybrid Windstyle Jacket bcd, for example should I also consider changing to a long hose configuration or is that just for techies?
I am a new OW diver (10 dives), and I do my best to dive safely and responsibly. I try to always be aware of safety and really want to simplify and "do it right". All of my dives have been beach vacations dives with local operators, using a mixture of rented equipment and my own. Too often I've found operators that are in a rush to get people quickly in the water and diving and forgo a lot of the steps (or all of them) of a pre-dive check, both on the boat and on the surface. I am not familiar with some of the equipment I'm wearing since it's not mine, so I always ask them for a minute or two to do my check, even when the guide and the rest of the group is probably already in the water. Do you have any suggestions for us in this spot? I want to be safe in my dive, but I also understand that they are doing their jobs, and I don't want to delay the operation.
Thanks for sharing your experience. First and foremost, you are a paying customer. If you feel you're not getting enough time for your preparation, feel free to walk away and choose a reputable operator that understands safety. Regarding your unfamiliarity with the equipment, I highly suggest investing in your own. At some point, you’ll need to decide whether you want to pursue this sport seriously or remain a holiday diver who only dives a few times a year. Based on your questions, I believe you’ve already made that decision. So, purchase your own equipment, and you’ll solve half of your problems in one go.
When there is significant current and a negative entry is needed to minimise separation of a group of divers, how does this system work or what modifications need to be made?
Thanks for your comment, that's a great question! We actually debated whether to include this edge case in the video. In our opinion, the only valid reasons to dive in a current are either during a proper drift dive or when using a DPV, both of which merit their own dedicated video. We'll create content to cover these scenarios. To answer briefly: you would perform the safety check just as shown in the video, but on the boat instead. The S-drill can be done at 3 meters of depth in almost any conditions, whether you're drifting or not. However, you’ll need to forgo the bubble check entirely when conducting the checks out of the water.
Saw that as well. It would have been good if the presentation noted that to fully help with raising awareness of what to look for when doing the bubble check
Absolutely great content as always. Nevertheless, do you think the pre-dive check should be done in water for a technical rebreather dive? For example, when perfoming a trimix dive with my rebreather, I find more secure to properly do the pre-dive check on the boat just before entering the water. The bulkiness and the (sometimes) rought sea condition are not optimal to our pre-dive checklist. But the true message of promoting the culture of rigorous pre-dive check are great! Thank you
Thank you for your thoughtful comment, Sebastien! You make an excellent point, rebreathers are indeed more complex and often present unique challenges. As you mentioned, going through your mandatory checklist during assembly, including verifying sensors and conducting loop checks, is critical and typically taught as best practice. However, we still see value in moving certain parts of the process, like bailout deployment, into the water (conditions permitting). Despite the added difficulty, especially with the bulky gear required for technical dives, this approach can help ensure all team members are comfortable with their equipment in real conditions. Ultimately, the goal is to develop a system that works for you and your team while continually refining it. While this video focuses on traditional open circuit configurations, the same principles apply effectively to dives with multiple stage or deco bottles.
Integrated on the backplate and around the cylinders. Consider checking out our divers trim related video that explains the concept in depth. ruclips.net/video/x5AoGrKqWCg/видео.html&ab_channel=FlowStateDivers
@ButYesButNoButYesButMaybe this video is a slow and paced demonstration.. the entire process from start to finish will take you less than 40 seconds if you and your team built competence doing so.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
You guys are a gift to the scuba community that keeps on giving. I salute you for that!!
Thank you!
Great content as always. In the future would you consider making a video about how to effectively dive with camera equipment with the DIR setup?
@scrubly_jr great suggestion! We are working on a video that discusses equipment streamlining, and this topic fits right in :)
Loves the videos yall put out. Been diving for just over a year and finished AOW about 3 months back. In selecting and setting up new gear, through reviewing and practicing movements, on to continuing continuous education I can't state it enough how great these videos can be. Yall keep it crisp, direct, and too the point without any of the fluff. Love it!
Thanks for watching!
As new divers, we have learned so much from your very well made videos that are infomative and to the point, and look forward to every new video you upload. We absolutely LOVE them! They are SO good! 🤿👌
You guys are incredible divers.
Gracias babbette y Peter, por ponerlo en español, estoy en Tenerife y no he podido bucear con ustedes por el idioma, muchas gracias por tener en cuenta el castellano
Thank you for producing this video
@@ivoryjohnson4662 our pleasure
I wish my buddies would join me on this before every dive. My experience is that most divers only check their equipment before boarding the boat.
@Thiione time to build yourself a team rather than diving with 'buddies' ;)
@flowstatedivers Agree!!
These videos are truly invaluable!
Glad you like them!
Awesome work as always!! I love the fact that you suggest doing this in the water, I always without exception noticed that something has changed after jumping in.. nevermind the mess with remembering each step so this top to bottom right to left logic really simplifies all this. I'm ever so grateful for your help and its a standout contribution for the dive community for sure.
Glad it was helpful!
Hi, are you planning to do video on shotline setup and deployment ?
There is only one video on yt explaining it
Thanks for the tip, that's a great idea!! Added to our list :)
Awesome video as always! Say hi to the cats for me 👋
So you are familiar with the place :)
Can't wait for this already!!!!
Thank you so much for sharing all this knowledge!
You are so welcome!
Very good Video as always but short question, isn't it better to check things like weights, buckles, mask, suit and air value open before I enter the water?
Thank you for raising such a great question!
We approach this slightly differently because our system simplifies much of what you mention. Since we don’t advocate the use of removable weights, your required weight is integrated into your backplate or weight pockets on the cam bands during initial assembly, so there’s no need for additional checks.
Buckles are even easier; with DIR equipment’s continuous webbing setup, the only buckle (on the waist strap) is naturally checked as you put on your gear.
For the mask, as long as you have it with you, there’s no need to check it before entering the water - you’ll address it properly during the equipment match sequence covered in the video.
Lastly, the valve should already be opened when assembling your gear. If not, the issue will become evident during the pre-dive check in the water as you interact with your BC and regulator.
@flowstatedivers Thank you very much for your detailed answer which gives a better understanding in your DIR philosophy.
I'm just a normal recreational vacation driver, who likes to become better and likes to improve. So what a great Video would be " Why I should consider applying DIR to my diving even as a recreational vacation standard diver"
In your Videos we twin set up, side mount, cave diving and normal ones like me asking themselves, why should I also do this. I have a hybrid Windstyle Jacket bcd, for example should I also consider changing to a long hose configuration or is that just for techies?
Masterful content
Thanks a lot!
I am a new OW diver (10 dives), and I do my best to dive safely and responsibly. I try to always be aware of safety and really want to simplify and "do it right". All of my dives have been beach vacations dives with local operators, using a mixture of rented equipment and my own.
Too often I've found operators that are in a rush to get people quickly in the water and diving and forgo a lot of the steps (or all of them) of a pre-dive check, both on the boat and on the surface. I am not familiar with some of the equipment I'm wearing since it's not mine, so I always ask them for a minute or two to do my check, even when the guide and the rest of the group is probably already in the water.
Do you have any suggestions for us in this spot? I want to be safe in my dive, but I also understand that they are doing their jobs, and I don't want to delay the operation.
Thanks for sharing your experience. First and foremost, you are a paying customer. If you feel you're not getting enough time for your preparation, feel free to walk away and choose a reputable operator that understands safety. Regarding your unfamiliarity with the equipment, I highly suggest investing in your own. At some point, you’ll need to decide whether you want to pursue this sport seriously or remain a holiday diver who only dives a few times a year. Based on your questions, I believe you’ve already made that decision. So, purchase your own equipment, and you’ll solve half of your problems in one go.
Great video guys
Thanks so much!
When there is significant current and a negative entry is needed to minimise separation of a group of divers, how does this system work or what modifications need to be made?
Thanks for your comment, that's a great question! We actually debated whether to include this edge case in the video. In our opinion, the only valid reasons to dive in a current are either during a proper drift dive or when using a DPV, both of which merit their own dedicated video. We'll create content to cover these scenarios. To answer briefly: you would perform the safety check just as shown in the video, but on the boat instead. The S-drill can be done at 3 meters of depth in almost any conditions, whether you're drifting or not. However, you’ll need to forgo the bubble check entirely when conducting the checks out of the water.
Still holding out for your dry suit video 🤞🏽🤞🏽🤞🏽🤞🏽🙌
@tobypage892 we have been quite busy lately, but it's in the making
Great video! The SPG of the diver with doubles has a leak...
good catch ;)
Saw that as well. It would have been good if the presentation noted that to fully help with raising awareness of what to look for when doing the bubble check
TOP TOP TOP
If everyone always did this, there would be fewer incidents in the industry.
Absolutely great content as always. Nevertheless, do you think the pre-dive check should be done in water for a technical rebreather dive? For example, when perfoming a trimix dive with my rebreather, I find more secure to properly do the pre-dive check on the boat just before entering the water. The bulkiness and the (sometimes) rought sea condition are not optimal to our pre-dive checklist. But the true message of promoting the culture of rigorous pre-dive check are great! Thank you
Thank you for your thoughtful comment, Sebastien! You make an excellent point, rebreathers are indeed more complex and often present unique challenges. As you mentioned, going through your mandatory checklist during assembly, including verifying sensors and conducting loop checks, is critical and typically taught as best practice. However, we still see value in moving certain parts of the process, like bailout deployment, into the water (conditions permitting). Despite the added difficulty, especially with the bulky gear required for technical dives, this approach can help ensure all team members are comfortable with their equipment in real conditions. Ultimately, the goal is to develop a system that works for you and your team while continually refining it. While this video focuses on traditional open circuit configurations, the same principles apply effectively to dives with multiple stage or deco bottles.
Where are your weights?
Integrated on the backplate and around the cylinders. Consider checking out our divers trim related video that explains the concept in depth. ruclips.net/video/x5AoGrKqWCg/видео.html&ab_channel=FlowStateDivers
@flowstatedivers thanks. I've seen them all, I just wanted to see your actual placement and distribution with a drysuit out of curiosity.
By the time they finished their full safety check I'm already out of the water sucked the hell out of my 15l at 20m :D
@ButYesButNoButYesButMaybe this video is a slow and paced demonstration.. the entire process from start to finish will take you less than 40 seconds if you and your team built competence doing so.