UNISTRUT SOLAR PANEL MOUNT: How to install solar panels Using Unistrut/Superstrut
HTML-код
- Опубликовано: 20 окт 2024
- A rooftop solar installation means that the solar panels are mounted directly to your roof. Installing rooftop solar panels may be your automatic choice because of how common they have become, however, there are a few factors to consider before moving forward. There are certain criteria that your roof and house must meet in order for a rooftop solar installation to make sense, both financially and structurally:
Your roof does not have a clear South, East or West-facing exposure.Orientation is extremely important when it comes to installing solar panels.If your roof can’t accommodate the ideal angle for installation that the panels require, or there are too many obstacles creating shade, then ground-mounted solar panels would certainly be the right choice for you.
USE THIS LINK TO BUY YOUR LITHIUM BATTERIES AND SAVE 5%
BATTERY HOOKUP PROMO CODE
batteryhookup....
KAIWEETS Affiliate link:
kaiweets.com?sca_ref=4823342.ry8scB7CPV
USE THIS LINK TO SAVE ON YOUR NEXT PURCHASE
KAIWEETS KM201 Digital Multimeter - 2000 Counts True-RMS
kaiweets.com/p...
KAIWEETS HT100 Non-Contact Voltage Tester Pen AC
kaiweets.com/p...
Super thorough explanation! Thanks for taking the time to make a good video on this topic, helped me out a lot
I am glad you find this useful and helpful.
Thanks for watching, LIKE SHARE & SUBSCRIBE.
Here's a link to other useful videos on solar panels mounts.
SOLAR PANEL MOUNTING IDEAS
ruclips.net/video/VKrUS4Psij4/видео.html
UNISTRUT SOLAR PANEL MOUNT: ruclips.net/p/PLSNjIRSnUPDJSvz75KI8_pijBq43WgZyY
HOW TO GROUND SOLAR PANEL: ruclips.net/p/PLSNjIRSnUPDJs7aaCPjJV65DNEpT3cgKC
I will be your first SUBSCRIBER on your channel 👍
God bless you and people like YOU! For last 2 days i've been surfing on net to get cheapest stuff for mounting my panels...The pricec were half cost of panels (SLOVENIA),and than I got RUclips recomandation on this video... Man I can't belive how simple is this method,It's esthetic,It's safe,It's cheap and It's ALL that anybody could wish...And You've explained It in details and shared It with us...WOOW! AMAZING! You sure have made my day much better now and I thank you for that Sir...Tomorow I'm in a store and hanging on my roof
Wonderful!👏👍
I am glad I helped someone again with video.
Bringing joy and happiness to everyone's home is my top priority.
I am so thrilled you find this video helpful and I am sorry for the late response due to RUclips holding comments until per approval.
Please share a link to your solar project mount if you don't mind.
God bless you and your in Slovenia
I saw your video a few years ago, but tried to come up with my own way. It didn't work as well and was more expensive. Now, I am using your method. THANKS!
@@scasinger123
Thanks for trying my method and hope it works well for your desired setup.
If you haven't already been a supporter or SUBSCRIBER on this channel please do so and don't forget to SHARE & LIKE this video.
Cheers
you can also use a spring nut, and hold the square washer for the mid clamps and for end clamps a spring nut and a L i mean less bolts and easy to uninstall in the future if you need to. Nice video and good alternatives
Thanks for the video. I was really lost on the direction I needed to go in order to mount my panels. Now I get it! Thank you!!!
You are welcome.
LIKE SUBSCRIBE and SHARE
Thank you for taking the time to explain how you mount your solar panels using the rails. Good job!
Thanks for watching
Excellent explanation! I'm going to follow the steps to mount my new panels.
Thanks for your compliment.
Here are some helpful tips for your future projects.
Don't forget to LIKE👍 SUBSCRIBE & SHARE these links to others.
FYI, I BE WILL YOUR FIRST SUBSCRIBER ON YOUR CHANNEL
ruclips.net/video/Z0805tM_S4Q/видео.html
ruclips.net/video/vm795ptpARA/видео.html
ruclips.net/video/VKrUS4Psij4/видео.html
ruclips.net/video/DTZrHt_Fxxs/видео.html
ruclips.net/p/PLSNjIRSnUPDIY_4fOGmx1mYBZ5COZWQyJ
Was looking for strut panel ideas. This is it!
Great job, thanks.
I glad you find what you were looking for.
Thanks for stopping by and don't forget to SUBSCRIBE LIKE AND SHARE
I concur with all the below supporters - great job in your descriptive details!
Thanks for WATCHING.
LIKE & SUBSCRIBE
Thank you!!! I have aluminum unistrut and now I know how I will mount our solar panels.
I am glad you find this video helpful. Please don't forget to LIKE SUBSCRIBE & SHARE this video to help others.
Cheers
Excellent video, thank you. I am using unistrut to mount my four 180 watt panels to the roof of my hightop van. I was concerned because if I had to have space between my panels for "Z" brackets, they would be very close to taking up the entire 10 feet of the unistrut, which I am mounting between 2 gutter mount racks front and rear. (My panels will be mounted across the van just like you show yours) I will have room to get under the panels with a wrench to tighten them to the unistrut so, I will have no spacing between panels and, I will not have to spend like $40 on "Z" brackets I do not need. I might add some blue locktite to the bolts that go into the unjistrut but, other than that, I am happy I found your helpful video which just made my job much easier and cheaper. Thank you.
I am happy you came across my video and find it very helpful.
Thanks for sharing your project with me and please don't forget to SUBSCRIBE LIKE & SHARE this video.
Cheers
Great tutorial. Thats was i need the cheapest way. Thanks
You are welcome my friend.
Thanks for stopping by and don't forget to LIKE SUBSCRIBE and SHARE
Thank you so very much! This has been my one thing I just could not figure out!
You are welcome.
I am glad you came across my channel.
Please don't forget to Subscribe Share and like my videos.
Cheers
My opinion you done a good job and you are right on them expensive racks too much money for me to and that's what I was thinking about doing what you just showed thank you
Gary,
Thanks for watching I really appreciate your comment and I am glad you find this video helpful.
LIKE SUBSCRIBE and SHARE
Very smart idea for the rail system, and thank you for showing all of the parts needed which is very helpful.
Thanks for the comment Derek. I really appreciate your positive feedback for this video. LIKE SUBSCRIBE and SHARE
Have a bless day buddy.
@jwsolarusa Dude, I'm SO happy you posted this. I had watched a different video on using unistrut previously, but their method did NOT work for my roof, and was not stable. This video was literally an answer to prayer for me. It's perfect, and way more secure! THANK YOU THANK YOU THANK YOU!
I am glad to hear that and thanks for sharing this awesome comment.
Please don't forget to LIKE SHARE and SUBSCRIBE. Be sure to check out the rest of my videos on my playlist and stay tuned for more to come.
THANKS FOR SHARING! VERY THOROUGH AND HELPFUL VIDEO
Thanks for watching. I am glad you find this video helpful.
Please LIKE SHARE and SUBSCRIBE
Excellent video. I have been meaning to do one of these instructables using easy to get parts. Great work!
This is amazing! Helped me a lot, thank you.
Thanks for having me.
LIKE👍 SUBSCRIBE & SHARE
Thanks for sharing really appreciate the items being displayed before so I can find them at a store.
Thank you.
I am glad you find this video helpful. LIKE SUBSCRIBE and SHARE.
Have a bless day and
Another great video my friend, here is another great tip is to mount tilt brackets in between the panel and the uni-strut. I hope you and your family have been OK during this crazy time. Keep up the good work and stay safe and God bless you and your family
Amen and thank for stopping by
Great Video. I'm about to install 410W solar panel on my greenhouse roof structure. This would work so well. Thank you.
You are welcome my friend.
Stay tuned LIKE SHARE and SUBSCRIBE
God Bless brother you are right, it is safer than “professional” install
Thanks for WATCHING.
I am glad you find this video helpful.
Please don't forget to LIKE SHARE and SUBSCRIBE
Here's part:3
UNISTRUT SOLAR PANEL MOUNT: How to secure solar panels\/unistrut superstrut mounting solar panels
ruclips.net/video/Z0805tM_S4Q/видео.html
Awesome stuff man, thanks for sharing.
Thanks for WATCHING. I am glad you liked the video.
Here's is version 2:
SOLAR PANEL MOUNTING IDEAS
ruclips.net/video/VKrUS4Psij4/видео.html
Using this suggestion for 3 panels on 2 10 ft. struts. Works nicely for my temp setup easy to slide them in an out.
Wonderful !
I am pleased this method works for your application.
Thanks for sharing and for stopping by.
LIKE SUBSCRIBE and SHARE
Thanks . I love how innovative people can get.
I am glad you find this video HELPFUL.
Thanks for WATCHING and don't forget to LIKE SHARE and SUBSCRIBE
The sliding nut you are using can be inserted from the top and turned 90 degrees to seat, the nylon washer keeps it high in the track after insertion. The ears sit in the track to prevent the insert from turning.
Thanks for the input
Thanks so much for this video. I wasn’t too familiar with unistrut, so the first half was especially useful.
Thanks buddy.
I am glad you learned something out of the video.
Please try to watch PART#2 of that where I clarify some other viewers concerns.
Thanks for stopping by and see you on my next video.
Have a bless day Jeff.
great video super helpful.I want to put this on the roof on my trailer but I am planning on using bifacial solar panels. Do they make any type of shock anti vibration that I can use under the strut so my panels don't break from the movement?
I am glad you find it helpful.
Please don't forget to LIKE SHARE and SUBSCRIBE
👍👍👍👍👍 5 Thumbs up to you Sir. Thank you for your informative video. Well done
I am glad you liked it.
Thanks for watching, SUBSCRIBE and SHARE this video.
Have a bless day.
Another great video! Nicely explained for all levels.
Great video! Thanks a bundle!
You are welcome
Thank you this was very helpful. Going to use the same hardware
You are welcome.
Thanks for stopping by and visit my channel.
I am glad you find this video helpful.
LIKE SHARE and SUBSCRIBE
not bad -yes that will work-i will use door hinges - to till my panels-on the same device/thanks
Just what I needed, thank you. You seem to need to leave the gap between the solar panel and the Unistrut slightly loose to allow them to slide along. I was wondering, without the center clamp connected to pin them down would these not rattle on a windy day? The end struts would only clamp the ends down but the center would still be a weak point (in terms of rattling).
You are welcome. I am glad you find this video helpful.
Please don't forget to SUBSCRIBE LIKE & SHARE THIS VIDEO.
exactly what i needed bro thank you
I am glad you find that vide helpful
Great video man! Thanks
Thanks for watching and don't forget to SUBSCRIBE LIKE AND SHARE
Thank you!
You most welcome.
Thanks for stopping by and watching my videos.
Please don't forget to LIKE SHARE👍and SUBSCRIBE
Nice withouth mid clamps and you dont have to tighten lot of midclamps .. I love this ...its cheap unistrut are strong anyone can get in thier country
Thanks for stopping by.
LIKE SHARE and SUBSCRIBE to my CHANNEL.
Please don't forget to check out the link below for more videos like this:
UNISTRUT SOLAR PANEL MOUNT: ruclips.net/p/PLSNjIRSnUPDJSvz75KI8_pijBq43WgZyY
well done! I used 80/20 aluminium extrusions and it cost me quite a bit more. I also used some angle aluminium pieces, but I see how your material would be much less of a cost, Thanks
Yes and thanks for your input and watching my video.
Please don't FORGET to LIKE SUBSCRIBE and SHARE my videos and my Channel.
Cheers
UNISTRUT NUT WITH SPRING: Superstrut Solar Panel Mount
ruclips.net/video/XBR-aiK7kIw/видео.html
SOLAR PANEL ORIENTATION/Cutting Unistrut/Superstrut for Roof Mount Installation
ruclips.net/video/eNFo08dfN8Q/видео.html
UNISTRUT SOLAR PANEL MOUNT: How to install solar panels Using Unistrut/Superstrut
ruclips.net/video/3uubcw8gGPw/видео.html
Aluminum is a soft, ferrous metal and it is a weak metal which will eventually strip out, 100% of the time and especially, on torque situations like this. Please, place brackets like a picture frame around the frame aluminum then bolt through. You will not kill so done when it flies off your roof like a kite.
jwsolarusa )
@@PhilVerryChannel Aluminum is non-ferrous.
Hey, thanks I’m great full for you sharing your knowledge. In my situation ( non roof mount ) do you think the mid gap is important for wind ? We get occasional thunderstorms with 60 mph winds. Going to Home Depot tomorrow to pick up the struts. So far I need to mount like 1200 watts of panels.
It's your preference to have a mid gap.
Thanks for watching and don't forget to like & subscribe
Very helpful video.... Thank you
You are welcome.
Thanks for watching, I glad you find this video helpful and don't forget to LIKE👍 SHARE and SUBSCRIBE
Unistrut is very adaptable. I use some on a solar panel pole mount attached to azimuth.
Oh......yes.....unistrut are very useful.
LIKE & SUBSCRIBE
Thanks! Looking to follow something similar. Do you have a parts list for what you used by chance?
Here are good examples.
Thanks for watching and don't forget to LIKE SHARE and SUBSCRIBE
Thank you!
You are welcome 👏
I am glad you find this video helpful.
Please don't forget to LIKE SUBSCRIBE and SHARE this video.
ruclips.net/video/3AJWkKnUeNY/видео.html
This is great! Thank you 🙏🏼
Thank you.
I really appreciate your input and please don't forget to LIKE 👍SHARE and SUBSCRIBE for future updates.
Have a wonderful day buddy.
Good budget idea, but still needs better securing. Also you need at least a 1/4" spacing between panels to prevent heat build up and comply with codes in certain states.
Thanks for watching
Nice -- thanks
Thanks 👏 for stopping by.
I am glad you find this video helpful.
Don't forget to SUBSCRIBE, give the video a LIKE👍 and SHARE it please......
Thank you for your easy to understand intructions.
I ordered a solar panel yard mount and there are no instructions to speak of. Looked at picure on box for assembly but had no clue how to attach the 4 panels to super strut.
I am glad you find this video helpful.
Thanks for watching LIKE SUBSCRIBE AND SHARE
Wonderful alternative! Thank you!
Simplified. Thanks for sharing.
Thanks for watching.
I am glad you liked it.
Don't forget to LIKE SHARE & SUBSCRIBE
Great explainer video! I'm consideirng using this setup on my van. Is there any horizontal shake of the panels using the sliders and if so is there a way to mount it such that there isn't? Since the van will be moving I didn't want there to be any rattling up there.
These panels are perfectly designed and sturdy for my application uptil now.
Thanks for watching and for stopping by.
Don't forget to LIKE SHARE and SUBSCRIBE
Thanks bro
@@LUCK-k8
You are WELCOME👍
Please don't forget to SHARE LIKE
nice simple thanks
I really appreciate you stopping by and also your awesome comment.
Please don't forget to SHARE LIKE and SUBSCRIBE
BRILLIANT !
Thank you.
Please don't forget to LIKE SHARE and SUBSCRIBE
Thank you for this video! I still have one question though. How do you determine the correct gauge size to use for the super strut?
Thanks for watching.
Don't forget to SUBSCRIBE LIKE👍 the video and SHARE.
It's all by depends on the kind of installation you want for your project
Keep doing the good work. 👍
Nice work.
Thanks for the video, would the panels not rattle when it's windy?
Not at all.
LIKE SHARE and SUBSCRIBE
Thanks. I'm planning to do this.
I am glad you find this video helpful and thanks for stopping by.
Please don't forget to LIKE SHARE and SUBSCRIBE
Super wonderful
@@curiosidadanalitica6564
Did you find what you were looking for?
Thanks for stopping by and don't forget to LIKE SHARE and SUBSCRIBE
Thanks for the great video! But I got a question: how can You tighten the bolt on the inner side to the panel towards to the previously installed panel? Or I just have to make it tight enought to able to slide it in the rail?
Here's a link to my videos how I have done it.
ruclips.net/p/PLSNjIRSnUPDJSvz75KI8_pijBq43WgZyY
Just a thought, before mounting the struts mount panels first that way you can use the holes in strut
and from the "backside" you will be able to line up and tighten bolts on the panel. Leave a 2 or 3 inch gap
in panels when mounting to struts. The gaps will be used so you can get a lag bolt down into roof joist.
I keep seeing people do this, how are you stopping galvanic corrosion? You have steel and aluminum together? You have stainless steel hardware but regular steel uni strut?
There isn't any corrosion with my installations.
I don't know about yours? Could you please share your installation with us.
Anyone can use whatever they have available.
It's a matter of CHOICE we making in life.
Thanks for stopping by and don't forget to LIKE SHARE AND SUBSCRIBE
good job , thanks for the video
Anytime.
I am glad you liked the video. If you haven't been a SUBSCRIBER yet please do LIKE SHARE and SUBSCRIBE
Fantastic idea
Thanks.
Please don't forget to LIKE SHARE and SUBSCRIBE
Make sure you place a plastic washer between the strut and the module. Galvanic action takes place if different metals touch.
UNISTRUT NUT WITH SPRING: Superstrut Solar Panel Mount
ruclips.net/video/XBR-aiK7kIw/видео.html
SOLAR PANEL ORIENTATION/Cutting Unistrut/Superstrut for Roof Mount Installation
ruclips.net/video/eNFo08dfN8Q/видео.html
UNISTRUT SOLAR PANEL MOUNT: How to install solar panels Using Unistrut/Superstrut
ruclips.net/video/3uubcw8gGPw/видео.html
Had my modules on galvanized rails for bit longer than 7 years. No visible damage can be seen of galvanic action.
Boats in saltwater use sacrificial.zinc anodes to protect aluminum hulls and motors .
It works the same on the unistrut .
As long as the majority of the zinc is still present , corrosion will be negligible .
How are you managing the ground of each panel?
@@CalvinGorriaran
Just as usual.
Thanks for stopping by and don't forget to LIKE SHARE and SUBSCRIBE
Trying this right now, using 7/8 Unistrut. Hitting a snag. The struts are mounted to the roof with lag bolts, but now the sliding pieces can't get past the head of the lag bolt. Not only can we not slide the panels into position, we can't even set them up so they won't slide at all. Trying to set up four 250 SanTan panels side-by-side.
What are we missing?
I may have figured it out. At the 2:10 mark of this video you mention both Unistrut and Superstrut, but then you picked up and used the larger Superstrut, when I thought you were using the regular Unistrut.
You have to use flat and wide head bolts to mount or install the rails so you can have clearance later when you about to slide your solar panels. I hope you figured it out.
Thanks for stopping by and also for using my teaching method for your portable solar install.
Don't forget to LIKE SUBSCRIBE and SHARE.
I have a bless day
Take a look at this other video I installed two large panels.
Here are the link on how I have used UNISTRUT to installed solar panels
ruclips.net/video/Z0805tM_S4Q/видео.html
ruclips.net/p/PLSNjIRSnUPDJSvz75KI8_pijBq43WgZyY
Great description!
Thanks for watching.
Please don't forget to LIKE👍 SUBSCRIBE and SHARE
UNISTRUT NUT WITH SPRING: Superstrut Solar Panel Mount
ruclips.net/video/XBR-aiK7kIw/видео.html
SOLAR PANEL ORIENTATION/Cutting Unistrut/Superstrut for Roof Mount Installation
ruclips.net/video/eNFo08dfN8Q/видео.html
UNISTRUT SOLAR PANEL MOUNT: How to install solar panels Using Unistrut/Superstrut
ruclips.net/video/3uubcw8gGPw/видео.html
I thought about using foam tape or even two sided tape between panels, to create a seal between them, to keep leaves from building up between and on the panels. There would be less chance of a leak if they are sealed between , I have 2kw I want to put on my roof, but haven't found a cheap way to mount unistrut to the roof! Maybe simple as a block of treated 4x4! But I want it to last, any roof attachment idea's??
It depends on your roof. If its regular shingles then almost anything will do. Like a Z mount. Just make sure you use lots of sealant. If it is tile then you will need special tile roof mounts. Not horribly expensive but still around $5-10 each. They go under the tiles and mount to the roof studs. they also have some
UNISTRUT NUT WITH SPRING: Superstrut Solar Panel Mount
ruclips.net/video/XBR-aiK7kIw/видео.html
SOLAR PANEL ORIENTATION/Cutting Unistrut/Superstrut for Roof Mount Installation
ruclips.net/video/eNFo08dfN8Q/видео.html
UNISTRUT SOLAR PANEL MOUNT: How to install solar panels Using Unistrut/Superstrut
ruclips.net/video/3uubcw8gGPw/видео.html
The panel may never blow off a roof, but flutter may become a problem if the panels are allowed any slop to move around.
Thanks for your opinion.
LIKE👍SHARE and SUBSCRIBE
Absolutely only a matter of time before the panel bolts unscrew and the panel bends in the wing or comes crashing to the ground.
@@andyxox4168 spring washers and plenty of thread locker
Nice video. I'm concerned about leaves from trees can be jammed there, rot and make some mess.
I appreciate your concern. Thanks for watching my video, I'm glad you liked it.
LIKE SUBSCRIBE and SHARE
Even in Florida weather conditions I can just push together like 16 panels without mid clamps?
Use your discretion. Thanks for watching LIKE SUBSCRIBE and SHARE
ruclips.net/p/PLSNjIRSnUPDJSvz75KI8_pijBq43WgZyY
6:40 Your roof is carpeted? Ha ha... The struts and hardware, did you buy them in the U.S and if so which hardware store was it?
Home Depot, Lowe's
Menards
LIKE SHARE & SUBSCRIBE
You can use the smaller unistrut right? Its cheaper then super strut.
Yes
LIKE SHARE and SUBSCRIBE
Looks like you’re better off getting the super strut. The hex bolt on the slides and hex lag screws to roof won’t leave enough room for clear sliding in the smaller strut. The prices are similar after all so I will exchange for the super strut.
@@gregtatosian2021
ruclips.net/p/PLSNjIRSnUPDIY_4fOGmx1mYBZ5COZWQyJ
Can you make it Angle Adjustable?
If you wish to, or want to. All depends on your project application.
Thanks for stopping by and don't forget to Like👍 Subscribe and Share
You can add more to your work , do the same video using Roman double tile with hook roof flexible ...... Mount
Thanks for watching
It looks like and sounded like it had some play. In other words kind of loose. Can they be tighten a little more
Yes.
I was just demonstrating how you can go about this.
Thanks for concern and for watching.
Please don't FORGET to LIKE SUBSCRIBE and SHARE my Channel.
Cheers
You do realize that they were just sitting on the floor. Once the rails are bolted on the roof they will not be loose.
UNISTRUT NUT WITH SPRING: Superstrut Solar Panel Mount
ruclips.net/video/XBR-aiK7kIw/видео.html
SOLAR PANEL ORIENTATION/Cutting Unistrut/Superstrut for Roof Mount Installation
ruclips.net/video/eNFo08dfN8Q/видео.html
UNISTRUT SOLAR PANEL MOUNT: How to install solar panels Using Unistrut/Superstrut
ruclips.net/video/3uubcw8gGPw/видео.html
Thanks for the helpful info. I do have one question, can you use 3/8in Cone Strut Nuts in place of the 3/8 Top Grip Nuts that you used? I'm not able to find any Top Grip Nuts locally, only the Cone Strut Nuts. Do you see any issue with swapping them out?
You might
Thanks for watching LIKE SUBSCRIBE and SHARE
@@jwsolarusa Might? So I should use the Top Grip Nut instead of the Cone?
@@loudfang5.21
What Stores have you checked?
These are the stores I definitely recommend you check for these stuff.
Lowe's
Home Depot
Menards
@@loudfang5.21
I suppose the cones will work as well for I have not yet experimented those
Awesome video 👍🏼
Thanks for watching. LIKE & SUBSCRIBE to the Channel
Nice and simple video. Thanks a million
Awesome video
Great but I can’t find Unistrut on Canadian Home Depot or Lowes websites... of course...
ruclips.net/video/Z0805tM_S4Q/видео.html
Hello, it seems to me like they would rattle in the wind. are the connectors that attach the panel to the strut supposed to be that loose or should they be tightened down more?
You can tighten them up. This video was for demonstration purpose.
Thanks for stopping by, LIKE SUBSCRIBE & SHARE
UNISTRUT SOLAR PANEL MOUNT: HOW TO SECURE SOLAR PANELS, UNISTRUT SUPERSTRUT MOUNTING SOLAR PANELS
ruclips.net/video/Z0805tM_S4Q/видео.html
@@jwsolarusa But how do you tighten the ones down that are under the solar panels when the unistruts are attached to the roof???
You can tighten the rails
LIKE SHARE and SUBSCRIBE
@@rockandrattleretreat5830 Mount the panels on strut first then mount the strut on roof.
Just have space in panels for access to roof so you can have bolts into roof on ends AND between panels. Just a thought?
I would be worried about expansion and contraction breaking things apart without the gaps between the panels to compensate. Is my caution unjustified?
Check out my playlist to see my rooftop solar installation without any worries.
LIKE & SUBSCRIBE
UNISTRUT NUT WITH SPRING: Superstrut Solar Panel Mount
ruclips.net/video/XBR-aiK7kIw/видео.html
SOLAR PANEL ORIENTATION/Cutting Unistrut/Superstrut for Roof Mount Installation
ruclips.net/video/eNFo08dfN8Q/видео.html
UNISTRUT SOLAR PANEL MOUNT: How to install solar panels Using Unistrut/Superstrut
ruclips.net/video/3uubcw8gGPw/видео.html
Unistrut with spring nuts saved u some time
Thanks for your input
Thanks for the educative videos. Can you please give online links to these parts (say on Amazon)?
Thanks for the comment I really appreciate it.
I will recommend you check with your local hardware stores for all of these materials.
I did not order mine online.
Please don't FORGET to LIKE SUBSCRIBE and SHARE my videos and my Channel.
Cheers
Thanks
You are welcome and thanks for stopping by
Do forget to LIKE SHARE and SUBSCRIBE
Would help if I could see the other side. Also more detailed shots of the back and front on the first part.
UNISTRUT NUT WITH SPRING: Superstrut Solar Panel Mount
ruclips.net/video/XBR-aiK7kIw/видео.html
SOLAR PANEL ORIENTATION/Cutting Unistrut/Superstrut for Roof Mount Installation
ruclips.net/video/eNFo08dfN8Q/видео.html
UNISTRUT SOLAR PANEL MOUNT: How to install solar panels Using Unistrut/Superstrut
ruclips.net/video/3uubcw8gGPw/видео.html
I don't understand why you left the panels loose in the rails. This is going to make a lot of noise in a windy day. You should have had the bolts so they can be tightened from the panel side (5:18)
UNISTRUT SOLAR PANEL MOUNT: How to install solar panels Using Unistrut/Superstrut(part:2)
ruclips.net/video/oDbPAZxXZvs/видео.html
Love it. Thank you
Thanks for WATCHING.
LIKE SHARE & SUBSCRIBE
How would you ground the system?
This is how I have done it.
Please take a closer look at this
ruclips.net/video/pOU6FQlAILY/видео.html
What is the size of the superstrut? 1-5/8" x 1-5/8"?
5/8 10ft long
Thanks for WATCHING, LIKE & SUBSCRIBE
UNISTRUT NUT WITH SPRING: Superstrut Solar Panel Mount
ruclips.net/video/XBR-aiK7kIw/видео.html
SOLAR PANEL ORIENTATION/Cutting Unistrut/Superstrut for Roof Mount Installation
ruclips.net/video/eNFo08dfN8Q/видео.html
UNISTRUT SOLAR PANEL MOUNT: How to install solar panels Using Unistrut/Superstrut
ruclips.net/video/3uubcw8gGPw/видео.html
Very cool
Thanks brother Donald.
ruclips.net/video/p1xx3qFzuGQ/видео.html
Look at my system
ruclips.net/video/hK4rzGDsLAA/видео.html
Tell me what you think I'm buying unistrut today to replace all wood with it
The one problem I can see is that expansion of your panels can cause a buckling effect on your panels mounted without a common clamp between them.
UNISTRUT NUT WITH SPRING: Superstrut Solar Panel Mount
ruclips.net/video/XBR-aiK7kIw/видео.html
SOLAR PANEL ORIENTATION/Cutting Unistrut/Superstrut for Roof Mount Installation
ruclips.net/video/eNFo08dfN8Q/видео.html
UNISTRUT SOLAR PANEL MOUNT: How to install solar panels Using Unistrut/Superstrut
ruclips.net/video/3uubcw8gGPw/видео.html
Excellent, solar panels as a roof top
Thanks Laxman.
I do appreciate your support and please check out my latest videos LIKE SUBSCRIBE AND SHARE MY VIDEOS AND MY CHANNEL .
Cheers
UNISTRUT NUT WITH SPRING: Superstrut Solar Panel Mount
ruclips.net/video/XBR-aiK7kIw/видео.html
SOLAR PANEL ORIENTATION/Cutting Unistrut/Superstrut for Roof Mount Installation
ruclips.net/video/eNFo08dfN8Q/видео.html
UNISTRUT SOLAR PANEL MOUNT: How to install solar panels Using Unistrut/Superstrut
ruclips.net/video/3uubcw8gGPw/видео.html
i’ll be using unistrut to install 6 panels on the side of my house. trying to get low winter sun 😂
Sounds like a plan.
Thanks for sharing n don't forget to subscribe like👍and share
Is this code compliant?
Check with your state
Were can the material be bought
Menards, Home Depot, Lowe's
If you find this information helpful, LIKE SHARE and SUBSCRIBE
@@jwsolarusa question can you attach 4 post to it somehow ? To have it in the ground and angled?
@@cw5156
Yes
Oh dear, oh dear, I waited till the end to see how you would tighten the bolts to the rear of the panels to stop them vibrating loose and allowing the panels to fall and … nothing…
… You even used the wrong spanner 14mm metric for the imperial bolts, should have been recommending 5/16 ths but hey who cares about good engineering practice?
Hello Andy,
Thanks for watching my videos.
I hope you find then helpful.
Here are some of the videos related towards your questions and concerns.
Please don't forget to SHARE LIKE 👍 and SUBSCRIBE to my channel.
Cheers.
(Part#2) UNISTRUT SOLAR PANEL MOUNT: How to install solar panels Using Unistrut/Superstrut
ruclips.net/video/oDbPAZxXZvs/видео.html
(Part#3) UNISTRUT SOLAR PANEL MOUNT: HOW TO SECURE SOLAR PANELS
ruclips.net/video/Z0805tM_S4Q/видео.html
(Part#4) UNISTRUT SOLAR PANEL MOUNT: 20kW BATTERY STORAGE FOR Off-Grid TINY HOUSE ON WHEELS
ruclips.net/video/Mg1Hl6DUtmg/видео.html
Awesome idea
Thank you! good adea