I put a split in my grip tape about an inch and a half below my bolts which is right where I set my front foot up for most kickflips. But otherwise, yes this is an interesting idea. Even just a regular grid would be helpful too to know exactly where to place your feet.
Thank you andy anderson for mapping out lines that are invisible for the normal world. For brand new skaters Or even in veteran ones may help improve foot placement and Promote consistent trick landing. Thank you, Nigel for producing this content.Please do not stop producing these films so that we may enjoy them for the rest of our lives
That conversation you just hung on at the end was so enjoyable. I felt like watching the video where Andy sets up a JM Duran Deck during Covid. The vibe is just way to good in your uncut videos. Keep going
when you're installing the griptape, only pull little bits of the paper off at a time, andas you peel it back, you can make sure it's lined up perfectly without worrying about it sticking.
I am sure many will call this "overthinking" 😀 I mean I see a lot of people have different foot placements, flick, scoop and wrap points for the same trick. It also depends on board shape and even wheels and trucks. ;-) But it looks interesting. I may consider it in case I can get my hands on a black 7ply Vajra and the grip. Currently there is a lack in supply of Powell boards in Germany, that's why I am now on a Heroin Anatomy Egg.
Man this is so helpful for my brain. Real innovation is seeing something everybody has looked at in a new way. Also, I hope your gnarly depression is over. Seems like it was the pain necessary to create something like this. Much love.
I'm a 33 year old man and this type of video still gets me pumped up to go outside ... I nerd out too but I'm still just trying to catch up. Some of the tips here helped me on some stuff I was getting hung up on (like relearning pop shove after learning scoopy shoves) so thanks! Also this grip is cool, I wouldn't mind putting it on my board and not just imagine the lines.
What if you made it so that the backing on the grip tape came in two pieces to peel off? One of them could be before the bolts on the nose or tail. So you line up and press down the grip tape with the backing still on and then you can peel off the small part over the nose or tail and press that down. I think then it would be lined up enough to peel of the rest of the backing and press it down over the rest of the board
Some of the best inventions are simple and obvious… this is one of them! Rad sauce 🤙🏼 I realized putting the tape on peal from the middle and leave the nose and tail backing on until it’s lined up.
If you want to make it fit on any board, you could cut it in half in the middle and make the front piece and the back piece fit. In theory it should work
Dude line it up on the board with the backing paper on and bolts going through the grip on top..... Peel back paper from one end, pressing the grip down as you go... Remove the bolts as you come to them. I think that will be much less risky and more precise. Love ya
Andy Anderson met the older differently haired Andy Anderson. I'm not a fan of Andy's skating, but he's an interesting fella. That heron logo is one of the only things he's created I genuinely like. It's dope.
That is a Bat-Mobile-looking griptape. First sceptical, but then makes sense. I've skated Mini-Logo trucks the most in recent 2 years and I like them the most of all, but could not keep skating them. They over-lock on the round copings - wheel gets stuck between the truck and the coping and it sucks the speed completely on 50-50-s. Also I could not adjust my position on the coping as I'm overlocked, e.g. get accidental toe-side lock on quarter and would look like little baby trying to battle invisible dragons. I just wish the hanger was straight. Weitght and wheelbase of those trucks is perfect, height is fine as it allows fun for early-pop but could be used with risers to have better scoop. MiniLogo's my favourite trucks, but the hanger is just overlocking. P.S. I don't care if Andy Anderson could avoid that overlocking, I just can't avoid that.
Very cool that grip is clean like that. Even cooler, is on an asymmetrical board, I'm interested in seeing how the lines naturally change layout, but will naturally work, because it will contour to the shape. Very very cool. I will definitely support this grip. I want a sheet as soon as I can get it. Haha.
Andy Anderson still revolutionizing skateboarding by thinking about the basics... What an amazing mind this man has... Oh yeah. When and where can i buy this to put on my andy Anderson board?
so I think a good name for it would also be the "flip grip :D One question I got: does it work for normal shaped boards too? last but not least I was just strongly considering to switch to some non abrasive grips just because im sick of ruining my shoes..also carrying the board would be so much more pleasant.. but thiiss out..makes out a tough call to decide.. GJ Andy
The Hendrix/Zappa analogy is great. Imagine what Hendrix could have created if he stuck around long enough learn theory. Zappa did improvise during guitar solos. Check out Stevie's Spanking with Vai... Peace!
So if you have a board with different wheel base you have weird bolt pattern in your grip? Would be better without those big dots, if anything use tiney dots
I'm still tripping on the fact that a Canadian skate legend met a Canadian rock legend ( Geddy Lee ) in Venice Beach... may get the grip for my dvargs effigy see if it lines up.
I've just ordered the tape . I have the baby heron board , im putting the tape and wheels on it just to hang on the wall. Anyone have great trucks idea to finish it off?
Im gonna miss tensor maglights. Nigel is right. They’re going out of business. I have two sets left. And the fact that they grind so well means they wear down faster. Im only skating them on twin tails as a result. I might get some on ebay in the later years upcoming
Correct me if I am wrong, but he said he is riding size 8 trucks? Anyone know what size wheel he is using? Wondering if that is flush or less than flush to the rail for stable rail stands
Looks like Mini Logo 8.38" trucks , which would be like an Indy 146 in translation. That deck is an 8.4". The wheels look like Nano Cubic 52mm or 54mm 97a wheels
@@jordanisraelson8640 thanks dude! Im still super unfamiliar with truck to board sizing but looking to build this with freestyle railstands in mind so really making sure it’s going to be more flush than a normal street set up
8.5" truck Axel would be pretty close too. I've used that size on an 8.38" deck and couldn't hardly notice the difference, an 8.25" truck would be noticably inward laying tho.
another way you could do it is to place the whole grip on the board WITHOUT taking off the back film. Then put the front 4 bolts through the front side of the board.. Next peel the film off the back side of the tape and then slowly stick it down. THEN pull the bolts out of the front side and then peel off the rest of the film and slowly press it down.
I wonder if at any point for competitions they well ban certain board shapes as people like Andy continue to refine the shapes in order to give them an "advantage" or whatever for certain kinds of tricks. I hope they don't but I just wonder if board design evolved to a point where there became rules about it. Similarly to like how in hockey, goalie equipment started to advance to a point where rules started to develop about how wide pads, or other pieces of equipment could be because at a certain point it was seen as "cheating"
Bro, it goes from playing around. We .just. never .had someone put it into a pattern. Math has nothing to do with trial and error. Stop being an " Stop with the hype. Let Andy talk. Everyone else should cease talking.
andy dropping the DLC to his new board
As soon as I saw this grip tape I was like, why hasn't anyone done this before?! It just makes so much sense!
Cause it’s so very wack
I put a split in my grip tape about an inch and a half below my bolts which is right where I set my front foot up for most kickflips. But otherwise, yes this is an interesting idea. Even just a regular grid would be helpful too to know exactly where to place your feet.
Same. Needed absolutely no explanation for experienced skaters. Just makes perfect sense. Still nice to hear the minutia from Andy himself
@Connor-xz7kn it suits the board and signature shoes. the full wack
Brilliant idea for griptape! Map out all the diff foot & flick placements for different tricks! Genius
This dude is a mad genius. I’m old and broken don’t skate anymore but this dude is just awesomeness and love watchin his flow and style
Thank you andy anderson for mapping out lines that are invisible for the normal world. For brand new skaters Or even in veteran ones may help improve foot placement and Promote consistent trick landing. Thank you, Nigel for producing this content.Please do not stop producing these films so that we may enjoy them for the rest of our lives
he's been talking about this for years its sick to see it finally out 👀
That conversation you just hung on at the end was so enjoyable. I felt like watching the video where Andy sets up a JM Duran Deck during Covid. The vibe is just way to good in your uncut videos. Keep going
I literally had the idea for this like a month or two ago. So glad to see that someone did it 🎉
when you're installing the griptape, only pull little bits of the paper off at a time, andas you peel it back, you can make sure it's lined up perfectly without worrying about it sticking.
I am sure many will call this "overthinking" 😀 I mean I see a lot of people have different foot placements, flick, scoop and wrap points for the same trick. It also depends on board shape and even wheels and trucks. ;-) But it looks interesting. I may consider it in case I can get my hands on a black 7ply Vajra and the grip. Currently there is a lack in supply of Powell boards in Germany, that's why I am now on a Heroin Anatomy Egg.
Man this is so helpful for my brain. Real innovation is seeing something everybody has looked at in a new way. Also, I hope your gnarly depression is over. Seems like it was the pain necessary to create something like this. Much love.
The shoes the deck and now the grip create the perfect skate experience. Amazing as always Andy ✌🏽️💨
From tearing his own grip tape making it unique every deck to pre-marked lined up holes. Andy does it all. Bases covered.
Passionate, innovative, unique style! One of my top 10 overall!
I'm a 33 year old man and this type of video still gets me pumped up to go outside ... I nerd out too but I'm still just trying to catch up. Some of the tips here helped me on some stuff I was getting hung up on (like relearning pop shove after learning scoopy shoves) so thanks! Also this grip is cool, I wouldn't mind putting it on my board and not just imagine the lines.
What if you made it so that the backing on the grip tape came in two pieces to peel off? One of them could be before the bolts on the nose or tail. So you line up and press down the grip tape with the backing still on and then you can peel off the small part over the nose or tail and press that down. I think then it would be lined up enough to peel of the rest of the backing and press it down over the rest of the board
Yea honestly that’s a great idea.
Some of the best inventions are simple and obvious… this is one of them! Rad sauce 🤙🏼 I realized putting the tape on peal from the middle and leave the nose and tail backing on until it’s lined up.
I wish skating was that technical back when I started around the 90s. The only way to get tech knowledge was to have money to go to woodward.
If you want to make it fit on any board, you could cut it in half in the middle and make the front piece and the back piece fit. In theory it should work
Thank you that’s actually amazing
I was wondering how I could make this work on one of my twin-tails. Jeenus! Thanks!
This man is writing musical sheets. Just listening to his patience and well being is inspiring.
I'm gonna order my board already gripped just to mess with the skateshop workers
Dude line it up on the board with the backing paper on and bolts going through the grip on top..... Peel back paper from one end, pressing the grip down as you go... Remove the bolts as you come to them. I think that will be much less risky and more precise. Love ya
I think that's what I'll do. I probably haven't put tape on since before Andy was born and I really would like to have it line up just right
Such an awesome idea!
Andy Anderson met the older differently haired Andy Anderson. I'm not a fan of Andy's skating, but he's an interesting fella. That heron logo is one of the only things he's created I genuinely like. It's dope.
Super cool idea 👏
that emblem in the middle looks nice
That is a Bat-Mobile-looking griptape. First sceptical, but then makes sense. I've skated Mini-Logo trucks the most in recent 2 years and I like them the most of all, but could not keep skating them. They over-lock on the round copings - wheel gets stuck between the truck and the coping and it sucks the speed completely on 50-50-s. Also I could not adjust my position on the coping as I'm overlocked, e.g. get accidental toe-side lock on quarter and would look like little baby trying to battle invisible dragons. I just wish the hanger was straight. Weitght and wheelbase of those trucks is perfect, height is fine as it allows fun for early-pop but could be used with risers to have better scoop. MiniLogo's my favourite trucks, but the hanger is just overlocking. P.S. I don't care if Andy Anderson could avoid that overlocking, I just can't avoid that.
Fair evaluation of the curved hanger ! Thanks for the feedback ❤❤❤
Very cool that grip is clean like that. Even cooler, is on an asymmetrical board, I'm interested in seeing how the lines naturally change layout, but will naturally work, because it will contour to the shape. Very very cool. I will definitely support this grip. I want a sheet as soon as I can get it. Haha.
Takes a while to grip but cool idea I think a better idea may be a stencil that you can spray any grip with that shows the lines
andy i would like to see a no comply to board slide or board slide to no comply off a rail....you can do it...thank you
Cool setup
You could make alignment jigs out of some old riser pads and some xl hardware
Andy Anderson still revolutionizing skateboarding by thinking about the basics... What an amazing mind this man has... Oh yeah. When and where can i buy this to put on my andy Anderson board?
long time don't see you bro.respect all the time ;) V
so I think a good name for it would also be the "flip grip :D
One question I got: does it work for normal shaped boards too?
last but not least I was just strongly considering to switch to some non abrasive grips just because im sick of ruining my shoes..also carrying the board would be so much more pleasant.. but thiiss out..makes out a tough call to decide.. GJ Andy
The Hendrix/Zappa analogy is great. Imagine what Hendrix could have created if he stuck around long enough learn theory. Zappa did improvise during guitar solos. Check out Stevie's Spanking with Vai... Peace!
Ohhhh my f.... God, finaly ❤
Hey bruddah! Cool grip! Anywho, any chance the dragon on your board is an homage to Cab?
Just ordered the grip! Can't wait to experiment with it.
So if you have a board with different wheel base you have weird bolt pattern in your grip? Would be better without those big dots, if anything use tiney dots
Someone else commented the idea that you could cut the grip in the middle and just line up the holes respectively, leaving a stripe in the middle.
Sucks bad. I had to quit skating from all the hard falls thru out the years... I miss it so much I dream that I'm skating.
I'm still tripping on the fact that a Canadian skate legend met a Canadian rock legend ( Geddy Lee ) in Venice Beach... may get the grip for my dvargs effigy see if it lines up.
Tricks by numbers😊
Andy, Will you ever make these boards into 9s?
Now you need to make a pdf for what foot goes where\line for which trick. Put bolts backwards sticking up as a guide….
Now make a series of vids showing how to use it with tricks
Andy anderson love from 🇨🇭🙏🏿🦾
What’s next Andy Anderson bolts and trucks and bearings? “BRO THESE HARDWARE BOLTS WILL MAKE YOU RAIL FILP EASIER!”
Dude how do we improve hardware !?
Eso siempre a funcionado,antes la lija se ponía en secciones a segun tus movimientos❤
that's genius
Reminds me of kenpo universal pattern.
I've just ordered the tape . I have the baby heron board , im putting the tape and wheels on it just to hang on the wall. Anyone have great trucks idea to finish it off?
finally Andy doesnt has to use his fingernail anymore
I'm surprised the grip doesnt have a fire hydrant somewhere on it lol
🛹Need More Andy Vids! 🛹
Arch angel Metatron cube!!!
Try and continue all the lines until they come back to touch
laying out a bunch of sheets makes some cool shapes
Im gonna miss tensor maglights. Nigel is right. They’re going out of business. I have two sets left. And the fact that they grind so well means they wear down faster. Im only skating them on twin tails as a result. I might get some on ebay in the later years upcoming
Show me how to switch heel
Correct me if I am wrong, but he said he is riding size 8 trucks? Anyone know what size wheel he is using? Wondering if that is flush or less than flush to the rail for stable rail stands
Looks like Mini Logo 8.38" trucks , which would be like an Indy 146 in translation. That deck is an 8.4". The wheels look like Nano Cubic 52mm or 54mm 97a wheels
@@jordanisraelson8640 thanks dude! Im still super unfamiliar with truck to board sizing but looking to build this with freestyle railstands in mind so really making sure it’s going to be more flush than a normal street set up
8.5" truck Axel would be pretty close too. I've used that size on an 8.38" deck and couldn't hardly notice the difference, an 8.25" truck would be noticably inward laying tho.
originates
Modern day Rodney Mullen
❤
another way you could do it is to place the whole grip on the board WITHOUT taking off the back film. Then put the front 4 bolts through the front side of the board.. Next peel the film off the back side of the tape and then slowly stick it down. THEN pull the bolts out of the front side and then peel off the rest of the film and slowly press it down.
My thoughts exactly much easier
Give andy some power tools
your mustache pains
I feel like Andy Anderson has the potential to be the first person to ever take an interesting dump.
Or a creative dump
Who else don’t know what the fuc he talm bout
What's everyone's favorite Zappa album? WOIFTM
I do my varial flips off the nose and they're varials.. not dolfiin
I wonder if at any point for competitions they well ban certain board shapes as people like Andy continue to refine the shapes in order to give them an "advantage" or whatever for certain kinds of tricks. I hope they don't but I just wonder if board design evolved to a point where there became rules about it. Similarly to like how in hockey, goalie equipment started to advance to a point where rules started to develop about how wide pads, or other pieces of equipment could be because at a certain point it was seen as "cheating"
5050 to no comply off rail...lol...not boardslide
Some will say madd genius, I’d just say madd
Looks sick tho
Bro, it goes from playing around. We .just. never .had someone put it into a pattern. Math has nothing to do with trial and error. Stop being an " Stop with the hype. Let Andy talk. Everyone else should cease talking.
A cheap market talk… by no means is it helpful it’s a hippy thinking too much for no reason la finest…
Only Andy.👍😃🇨🇦🌏🌎🌍🛹🛹🛹🛹