Join the waitlist for 'Salvaging Scraps" along with Jimmy Diresta paskmakes.com/salvaging-scraps/ It's been an epic project, probably my most ambitious one to date. Huge thanks to Corin and Shawn for an amazing few days. instagram.com/niroc_tools/ instagram.com/mcintyreknives/ Get my very own premium CA glue paskmakes.com/boni-bond/ Big thanks to Hoatian for the awesome Fibre Laser haotianlaser.store Check out Corin's awesome handmade tools www.niroc.com.au
@@ITALJUTE I love those too, but I'm afraid they are fully custom made... Given a dozen trial pieces that I can mess up, I think I might get to a working piece. But I am usually function over form even if I would like to create more beautiful stuff like Neil & Friends do.
Maybe you can find a way to plug him or shout out to him in a couple videos. Neil certainly deserves more traffic and most of your viewers would certainly enjoy his builds too.
@@corinkayaker not enough common hemisphere and continent between Alec and Neil. Though iirc Neil _has_ travelled to the USA, so all hope is not lost. Would be great to see Alec's dad involved in such a collab. He's an old timey woodworker from the old world, definitely interesting to learn from...
Neil, you have been talking about this project for more than a year and it was an honour and a privilege to be able to work with you both to get this made. Truly an amazing project with two of my best mates! You finished it beyond all my hopes and dreams! I am deep into the first batch of optical center punches but I will put up an expression of interest link for screwdrivers and get them on the work list. Glad you like them! Better then the bodgy torx bit I ground to get us building those first few days 😂
I reckon the project was better for all of our input, it was an awesome few days! What's the next collaboration going to be? And thanks again for the screwdriver, it's awesome! :)
Neil, I finally had a chance to sit down and watch this and what an amazing build!! The craftsmanship and the artistry on this one is second to none. Keep up the good work.😊
Loved the attention to detail from all the guys. Kindred spirits, multi-talented, awesome team. I can see this developing, and I'm really looking forward to future collaborations.
The sounds at 50:50 are pure joy! That's what's all about in fiddling with thise type of gadgets. Amazing! And as always - your patience is at another level.
You are an inspiration sir. I have been following you for many years and it is truly positively uplifting to watch as you find these new challenges to test your skills and learn new ones. Thank you so much for sharing this with us. I can not wait to see what you get up to next...
I didn't know what to expect when the video began, however, as the work progressed I became entranced at the progression and detail accompanying each step. I like very much your low-key narrative along with the excellent production. I have never seen anything like this. I look forward to watching more of your work. Well done and thank you!
Neil, absolutely stunning. What an awesome colab and project! The details with co creators names on the dials is just, I dunno, touching, elegant, genius!
What an awesome project. I am constantly amazed at the pieces you make and it is only outdone when you include Corin and Shawn. Very impressed indeed 👍
Neil, Corin & Shawn, congrats to all three of you. What a beautifully unique and awesome thing you guys have crafted. It looks almost too nice to use. Really enjoyed watching the process for this one Neil, thank you.
What an amazing project! You guys have knocked this one out of the park! The amount of hand fileing and fitting was incredible. Beautiful work fellas!!!👍🏻
I have to say, yet another intricate build with gorgeous attention to detail. But add a lanyard to that computer model, and it look dangerously like a tampon 😂🤣 Love it regardless...
Incredible seeing such talents come together for this awesome build! I’ve become obsessed with Corin’s tools from Neil’s videos and after using them now myself, they are worth every penny.
The Easter egg with the code is a fitting end to a beautiful project. Neil, your ingenuity and problem solving skills make these videos an absolute treat. Always enjoy your laid back approach to creating beautiful and functional pieces. Cheers!
Wow, This kind of project really highlights just how much goes into custom products like this and why they're so expensive, and that's noy including the pattern welded steel blade! But the fact that most of this project could be completed with a proper set of precision hand tools and a good quality center punch, it just makes you appreciate the old ones which were entirely made by hand and file! This is an amazing project, thanks so much for sharing, Wish I could get me one of those kinds of knives, as I do not have near the kind of tools required to make one of these. Cheers!
I would much prefer the blade having different designs on each side, but it's nice that we all have different tastes. That is an impressive piece of work, and it was great fun to watch! Congratulations!
I have been amazed with you and your creativity for years. You're friends are amazingly creative as well. This is a masterpiece in the true sense of the word. Adding Shawn and Corin to the dial when the combination is entered is brilliant.
Watching you work is truly inspirational. You really do make me feel like I could do anything. Not this level of anything mind you but you know…. Have a go. Thanks for sharing another amazing project Neil.
I've said this so many times with your projects, but just when I think "you cannot possibly top that last build," you go and make something extraordinary. Your outside-the-box thinking is truly genius and it's a wonder that you don't have twice the number of subscribers that you do now. Keep it up, Neil!
Neil, been a long time fan of yours and have taken some advice and suggestions from you and this is nothing short of what I have come to know from and about you! Hats off to you and the guys for a perfect build 👌
I wouldn't make a new blade , I think the whole thing is a work of art, even if the blade is different patterns on sides. Awesome fine detail workmanship guys. My hat's off to you. I have never been able to do that fine detail work, and cant see that well to even try !
So many skills shown by all three of you. Past experience would suggest you are the "file guy!" I've gotten a new love for filing, which I found boring before I watched you file stuff!
From the title, I didn’t expect to like this one. What won me over was seeing that little detent ball working during its test fit. And that blade! We’ll done, all.
Very cool project and craftsmanship! A little tip- if you quench your brass/copper type metals in a light acid mix you’ll get a cleaner result making cleanup a bit easier. Not trying to tell you what to do just a suggestion. Great work gents.
You always seem to come up with some crazy cool projects! That’s why I keep returning to watch your channel. I’m a woodworker, have always been a woodworker and recently got started with home hobby machining, currently working on a Webster engine. Have you ever considered building an IC engine? I would really like to see you build one.
this is a really cool concept, the fit and finish is awesome too. It honestly took until it was nearly finished before I could see how it was going to work. I noticed the four barrel pen, that was a cool thought for getting all the spring wire you needed Brilliant job guys
I love your collaboration videos, Neil. And what a beautiful knife. Watching 3 masters at work is so much fun, I was glued to the screen. Thanks for sharing this.
Join the waitlist for 'Salvaging Scraps" along with Jimmy Diresta paskmakes.com/salvaging-scraps/
It's been an epic project, probably my most ambitious one to date. Huge thanks to Corin and Shawn for an amazing few days. instagram.com/niroc_tools/ instagram.com/mcintyreknives/
Get my very own premium CA glue paskmakes.com/boni-bond/
Big thanks to Hoatian for the awesome Fibre Laser haotianlaser.store
Check out Corin's awesome handmade tools www.niroc.com.au
Just wondering why you limited yourself to one row for your code...
NPASK
MAKES
Industrial Arts at its peak. You don't see that too often now days in Modern Industry. Its just CNC blandness everywhere.
Great! Hope the time will be "European-friendly" :)
14:47 What are these little clamps called and where might I be able to buy them? Asking for my alter ego.
@@ITALJUTE I love those too, but I'm afraid they are fully custom made... Given a dozen trial pieces that I can mess up, I think I might get to a working piece. But I am usually function over form even if I would like to create more beautiful stuff like Neil & Friends do.
What an incredible build guys!!!
Maybe you can find a way to plug him or shout out to him in a couple videos. Neil certainly deserves more traffic and most of your viewers would certainly enjoy his builds too.
Thanks Alex! Glad you enjoyed it mate! :)
@@lukearts2954 I see a collaboration in our future.
Thanks mate!
@@corinkayaker not enough common hemisphere and continent between Alec and Neil. Though iirc Neil _has_ travelled to the USA, so all hope is not lost. Would be great to see Alec's dad involved in such a collab. He's an old timey woodworker from the old world, definitely interesting to learn from...
Neil, you have been talking about this project for more than a year and it was an honour and a privilege to be able to work with you both to get this made. Truly an amazing project with two of my best mates! You finished it beyond all my hopes and dreams! I am deep into the first batch of optical center punches but I will put up an expression of interest link for screwdrivers and get them on the work list. Glad you like them! Better then the bodgy torx bit I ground to get us building those first few days 😂
I reckon the project was better for all of our input, it was an awesome few days! What's the next collaboration going to be? And thanks again for the screwdriver, it's awesome! :)
Neils must almost be a sub branch of Bunnings Picton.
This is one of my favorites! Great build brother.
Thanks Izzy! :)
Neil, I finally had a chance to sit down and watch this and what an amazing build!! The craftsmanship and the artistry on this one is second to none. Keep up the good work.😊
Neil's ClickSpring episode...absolutely AWESOME!
Nice reference.
Glad you enjoyed it! :)
This is something new in the field of knife making. Hats off for the perfection.
This is the coolest build to date, even cooler than the camera. Congratulations for outdoing yourself so many times, sir. It's truly inspirational
Thanks very much! I think I agree that this was the coolest so far. :)
I’m not really sure what I just saw these past 51 minutes, but I’m thoroughly amazed.
Glad you enjoyed it! :)
Loved the attention to detail from all the guys. Kindred spirits, multi-talented, awesome team. I can see this developing, and I'm really looking forward to future collaborations.
Thanks very much. We will definitely make other projects together in the future, just need to think of ideas. :)
The sounds at 50:50 are pure joy! That's what's all about in fiddling with thise type of gadgets. Amazing! And as always - your patience is at another level.
It really is a very pleasing sound! :)
You are an inspiration sir. I have been following you for many years and it is truly positively uplifting to watch as you find these new challenges to test your skills and learn new ones. Thank you so much for sharing this with us. I can not wait to see what you get up to next...
Thanks very much Tomas! Glad you enjoy the projects and still find them interesting. :)
WOW! Neil, Shawn and Corin...you guys have outdone yourselves. This is STUNNING! Thank you for sharing this.
Thanks very much! :)
Way awesome project and collaboration!
Brilliant using the brass hex bit to keep everything square on the belt grinder.
I like the automatic lubrication system for the broach at 8:58
Shawn's accent is so interesting! Sounds almost northeast American with a hint of Aussie
He's an American who's been living in Australia for many years, so that fits.
I know, right?! He sounds like he moved to Australia from Wisconsin or Minnesota. It's fascinating!
That's exactly it. :)
@@PaskMakeshahahaha. Via the West Midlands
I was going to ask if he was American as well.
I didn't know what to expect when the video began, however, as the work progressed I became entranced at the progression and detail accompanying each step. I like very much your low-key narrative along with the excellent production. I have never seen anything like this.
I look forward to watching more of your work. Well done and thank you!
Neil, absolutely stunning. What an awesome colab and project! The details with co creators names on the dials is just, I dunno, touching, elegant, genius!
Thanks very much Luke! I think the guys deserved to have their names stamped on there somewhere. Glad you like it. :)
What an awesome unique object. Oval on the ferrules really finished it off all refined like.
Outstanding! And I would love to use a laser like that.
What an awesome project. I am constantly amazed at the pieces you make and it is only outdone when you include Corin and Shawn. Very impressed indeed 👍
I love this so much! I knew youd put Maker but the including of their names is a perfect touch!
What a brilliant concept - I've never heard of a knife like this. Some really clever ideas in the implementation, also.
Glad you enjoyed it. Check out Corin's barrel knives that he's made, you'll probably have to do a search. :)
@PaskMakes Definitely will. You've got some very talented friends.
Neil, Corin & Shawn, congrats to all three of you. What a beautifully unique and awesome thing you guys have crafted. It looks almost too nice to use. Really enjoyed watching the process for this one Neil, thank you.
Thanks very much Peter - Glad you enjoyed it! I don't think it will ever get any actual use all though it certainly could. :)
Unbelievable. Truly. Well done, all.
You can use springs from disposable lighters ,or watch strap spring bars.
What an amazing project! You guys have knocked this one out of the park! The amount of hand fileing and fitting was incredible. Beautiful work fellas!!!👍🏻
This is beautiful and you don't need another blade that one is brilliant, and subbed.
I agree.
Jeebus! Such precision in the finishing elements. Springs made of gnats eyelashes!!!
I like the close up of the big thumbnail pushing that tiny little spring
That's the reason I was never certain if it would work - I'm kind of blown away by how well it does though. :)
I have to say, yet another intricate build with gorgeous attention to detail. But add a lanyard to that computer model, and it look dangerously like a tampon 😂🤣
Love it regardless...
Incredible seeing such talents come together for this awesome build! I’ve become obsessed with Corin’s tools from Neil’s videos and after using them now myself, they are worth every penny.
Thanks mate!
Great job fellas and Neil I’m glad you went against advice to and made the effort of “ovalling” the ends, it really gives it the authentic shape.
yes rub it in why don't you, he was right 🤪
Just a great project, from the idea through the collab to the precision of making it and the overall style. So much fun! Beautiful!
Thank you - it was an epic project! :)
Wow, so much work for something so small. That's some intricate knife, amazing!
The Easter egg with the code is a fitting end to a beautiful project.
Neil, your ingenuity and problem solving skills make these videos an absolute treat. Always enjoy your laid back approach to creating beautiful and functional pieces. Cheers!
Very impressed with the build, loved the etching and crispness of the letters.
What an epic project. That came out beautifully. The 3 codes around the dials was a really nice touch.
Always enjoy your videos Neil.
I detect a Midlands accent, always makes me smile, I am from Cradley Heath/Dudley area
That whole project is absolutely NUTS!!! 😯
Wow, spectacular. Every part of it.
Thank you for sharing! 👍
Absolutely stunning! I have a few custom pocket knives, but this is on an entirely different level!
Wow, This kind of project really highlights just how much goes into custom products like this and why they're so expensive, and that's noy including the pattern welded steel blade! But the fact that most of this project could be completed with a proper set of precision hand tools and a good quality center punch, it just makes you appreciate the old ones which were entirely made by hand and file! This is an amazing project, thanks so much for sharing, Wish I could get me one of those kinds of knives, as I do not have near the kind of tools required to make one of these. Cheers!
Always a pleasure to watch your videos. It's nice to see friends working together on something like this. Incredible build, fellas!
Wow, just wow. What a project, so much skill and craftsmanship.
Absolutely blown away by how good this build is! Stunning!
I would much prefer the blade having different designs on each side, but it's nice that we all have different tastes.
That is an impressive piece of work, and it was great fun to watch! Congratulations!
Your work never ceases to amaze. Incredible.
I have been amazed with you and your creativity for years.
You're friends are amazingly creative as well.
This is a masterpiece in the true sense of the word.
Adding Shawn and Corin to the dial when the combination is entered is brilliant.
Thanks very much - Shawn and Corin really are incredible makers and also great mates too! :)
Watching you work is truly inspirational. You really do make me feel like I could do anything. Not this level of anything mind you but you know…. Have a go. Thanks for sharing another amazing project Neil.
Awesome project Neil! That code is just the absolute best, and the two "secret codes" are a very nice touch!
I've said this so many times with your projects, but just when I think "you cannot possibly top that last build," you go and make something extraordinary. Your outside-the-box thinking is truly genius and it's a wonder that you don't have twice the number of subscribers that you do now. Keep it up, Neil!
Neil, been a long time fan of yours and have taken some advice and suggestions from you and this is nothing short of what I have come to know from and about you! Hats off to you and the guys for a perfect build 👌
Of all the making channels I watch on RUclips, Neil, yours is easily my favourite.
Thanks very much Graham - Glad you enjoy the videos. :)
WOW from Florida you guys are genius.
Increadible work. A true artisan 👌
Thanks very much Paul! :)
Outstanding work, once again. Also, "That's not a knife" missed opportunity, And BOSCO for the code.
I wouldn't make a new blade , I think the whole thing is a work of art, even if the blade is different patterns on sides.
Awesome fine detail workmanship guys. My hat's off to you. I have never been able to do that fine detail work, and cant see that well to even try !
I absolutely LOVE the dual-pattern blade, wouldn't change it for the world. It's a feature, not a bug!
This is absolutely incredible! What an amazing tool, and the process and the precision it took was super impressive. Thanks for sharing!
Very clever and beautifully made and spending 4 days with friends nice . Thanks Neil
Incredible project! What a beautiful knife
There is a fine line between craftsmanship and insanity.
I think you may be right - and the video alone was quite the challenge to put together as well. :)
Holy complicated build Batman. Awesome job
It certainly was Timothy - Glad you like it! :)
So many skills shown by all three of you. Past experience would suggest you are the "file guy!" I've gotten a new love for filing, which I found boring before I watched you file stuff!
Crazy level of craftsmanship. Outstanding!
WOW! that was an incredible build!! Beautiful results!!
Mr. Pask, this is a true masterpiece.😮
Thank you! :)
From the title, I didn’t expect to like this one. What won me over was seeing that little detent ball working during its test fit. And that blade! We’ll done, all.
Woah 😲
What a fantasic work 👍
Have you thought about using the springs from a pin tumbler lock?
Just amazing! as a knife maker it's encouraging me to be way more creative, Thanks Pask for a terrific video. Good On Yer Mate!!!
gorgeous knife, amazing detail, love the lettering. Thanks for sharing.
Magnifique création ! Franchement bravo 👋👌
You guys have out-done yourselves. Amazing and beautiful.
You are an amazing craftsman!!!
Best comment of the vid: “We’re all right into the project now and having an awesome time” ❤
Very cool project and craftsmanship! A little tip- if you quench your brass/copper type metals in a light acid mix you’ll get a cleaner result making cleanup a bit easier. Not trying to tell you what to do just a suggestion. Great work gents.
We were quenching in a simple pickle solution.
It's like a greatest hits of all your other metalwork tools
Clicked for the cryptex, stayed for the build. What a fantastic idea and so well executed. Well done!
Un proyecto a nivel de joyería superior!! Es increíble!! Ojalá pudiese tener uno de esos cuchillos con código. Realmente quedé fascinado 😅
I feel smarter after watching your videos :)
thank you so much for sharing this vid, love your work mate!
I would love to see your design process sometime, I bet the problem solving involved is super fascinating to follow!
Wow Niel, that barrel knife turned out fantastic!!! Thanks for Sharing.
Excellent work. I've never wanted that vise more than I do right now!
You always seem to come up with some crazy cool projects! That’s why I keep returning to watch your channel. I’m a woodworker, have always been a woodworker and recently got started with home hobby machining, currently working on a Webster engine. Have you ever considered building an IC engine? I would really like to see you build one.
That is beautiful, great job lads.
This is next level
Congrats on an amazing job
this is a really cool concept, the fit and finish is awesome too. It honestly took until it was nearly finished before I could see how it was going to work. I noticed the four barrel pen, that was a cool thought for getting all the spring wire you needed
Brilliant job guys
Great build! Looks like a good way to spend a few days with friends.
Great collaboration. And i like the code's.
You are absolutely insane. This is an incredible build.
Thanks Andy - I reckon you may be right! :)
This is some impressive stuff right there
O K Pask when can we expect the teleporter build.😂😂😂👍
I'm always amazed by your skills and ingenuity. There's probably nothing you, Shawn and Corin couldn't make!
As usual, the craftsmen ship is gorgious! I definitely want to see more collabs between you three. Please make that a series.
This is so incredible !
Very cool job! It looks like a spy gadget!
Very impressive! A lot of intricate details too
Absolutely love this barrel knife! - Chris
Wow! What an insane project. Great work everyone!
I love your collaboration videos, Neil. And what a beautiful knife. Watching 3 masters at work is so much fun, I was glued to the screen. Thanks for sharing this.
Your mind works in different ways from the normal human. This collaborative project was excellent to watch.
thank you - Glad you enjoyed it! :)