I don't understand when I have to use the comfort or reduced temperature mode? Or is it just for set up the temperature for the program? Then the program will follow that temperature? Or is that a different if I use the comfort mode or the Auto mode? I just don't understand the difference.
Next problem, how do I get the curser to go upto top line. At the moment the square is sitting over the comfort mode, if I press the arrow keys it just shows higher temp no. Same with the plus key
The Loc Code is when the stat is locked, to lock or unlock the stat you first press and hold the OK button and then press either the + or the - button, this will then unlock the stat.
Bonjour j'ai le même le même thermostat . Programme P2 matin midi soirée weekend comme je suis souvent à la maison. Et là position soleil dit confort. Une température régler à 20. Apparemment pour ce programme P2 il est suivi en mode auto. Comme je suis sur symbole soleil est que cela pose problème.? Car les programmes son prés établi usine. Et je ne me vois pas me lancer dans la programmation.merci
Behind the screen on the left hand side, press the middle part of the case which will allow you to release the front of the programmer. after replacing the batteries you need to put the side in with the 3 pins first then press down on the other side until you hear a click.
The Loc Code is when the stat is locked, to lock or unlock the stat you first press and hold the OK button and then press either the + or the - button, this will then unlock the stat.
To turn the display off, move the cursor with the right or left button until you reach the 5th icon along from the left. It is the one that is a partial circle with a vertical line in it.
20 Seconds in shows the cursor over the on off pictogram, leave the cursor here and it will turn off in a few seconds. Also referenced at 48 seconds in.
Posted 13 years ago but still very helpful, thank you very much
Thank you, this is great as lost my instructions for the underfloor heating
Very glad it helped you out Alyhaidar
Struggling to set modes mine slightly different to this... Can't see the hours on bottom of screen... How to set user times?
If I want it to turn on when the temperature drops under 21 for example without any programs I just leave it to Auto?
I don't understand when I have to use the comfort or reduced temperature mode? Or is it just for set up the temperature for the program? Then the program will follow that temperature? Or is that a different if I use the comfort mode or the Auto mode? I just don't understand the difference.
Next problem, how do I get the curser to go upto top line. At the moment the square is sitting over the comfort mode, if I press the arrow keys it just shows higher temp no. Same with the plus key
The video helps me a lot. Thank you! ! !
You're welcome! thanks for letting us know.
Thank you very much from Austria
Pressed factory reset as instruction and get Lock codE can’t do anymore with it.
Just seen previous instruction
Very well explained and demonstrated. Thanks.
I have a message on mine saying loc code - any idea how to turn it off as I can't access anything. Or can I do a reset?
The Loc Code is when the stat is locked, to lock or unlock the stat you first press and hold the OK button and then press either the + or the - button, this will then unlock the stat.
Bonjour j'ai le même le même thermostat . Programme P2 matin midi soirée weekend comme je suis souvent à la maison. Et là position soleil dit confort. Une température régler à 20. Apparemment pour ce programme P2 il est suivi en mode auto. Comme je suis sur symbole soleil est que cela pose problème.? Car les programmes son prés établi usine. Et je ne me vois pas me lancer dans la programmation.merci
Non ça devrait aller.
@@dwheeler52 merci . Et pour la nuit sans rien toucher je me mets sur le symbole lune merci
Thanks that helped a lot from france😉
I have don’t this and the heating still not working
I’m struggling to increase the hearing how do I do that
How to change the battery from this device???
Behind the screen on the left hand side, press the middle part of the case which will allow you to release the front of the programmer.
after replacing the batteries you need to put the side in with the 3 pins first then press down on the other side until you hear a click.
j ai le même thermostat , mais c'est dommage ,je comprends pas l anglais. il n y a pas une traduction française. Merci
Naïma Taguia moi aussi
what does ' Loc codE ' mean?
same here, did u figure it out?
The Loc Code is when the stat is locked, to lock or unlock the stat you first press and hold the OK button and then press either the + or the - button, this will then unlock the stat.
Darren Wheeler Thank you !!!
Great guide, thanks a lot.
J'aurais aimé savoir en français
How do I turn it off?
To turn the display off, move the cursor with the right or left button until you reach the 5th icon along from the left. It is the one that is a partial circle with a vertical line in it.
20 Seconds in shows the cursor over the on off pictogram, leave the cursor here and it will turn off in a few seconds.
Also referenced at 48 seconds in.
thanks ,i try tommorow :-) ppfftt :-p
parle français putin!
Italiano
En francais elmlewhite
on est en FRANCE parle français