Oh shit swapped in a regular 4cyl!!! If not a sr20det than have to v6 vg30/33e or something to move faster than the ants on the ground , nice truck in good shape
Efrain Sanchez Hey bro. Loosen the torsion bars upfront and you can either get 3'' lowering leaf springs and 3" drop blocks to slam the rear a solid 6" or you can keep the stock leaf springs and remove the center monoleaf. Cut and re-drill hangers are a must tho and C-notch for extra low 😝🕺🏾
I know this is 3 yr old video but I have a 1994 Nissan Pickup D21 and I need a new engine. I love my truck and mechanics want me to junk it. Have had it for 26 years and most ppl don't understand. My truck is made of steel from bumper to bumper. I'm not letting it go. Can you tell me where to buy a good engine. I know it will not be new but low mileage would be great.
You can actually buy a new engine from baxters. Or you can also find a local engine rebuilder. I had my engine rebuilt. Other wise youll need to get lucky and find a used engine at a junk yard
Did you ever hear a nissan with a catalytic converter with a glasspack muffler...i want a nice sound but not rodiculous kind.any suggestions...i know its a old video but i also have a z24i motor...thats why im asking.
I'm running 2.25" pipe, removed cat, knock off version of a magnaflow muffler and dumps at the back of the cab. It's got a real nice sound when starting, idling, and casual driving when I rev it up you get the classic rasp the japeneses cars have but not overwhelming. I will say since the exhaust stops under the cab I do get alot of drone I'm the cab, not great for phone calls lol. But you can avoid that by dropping at the axle or further back.
scrappingpavement ok thanks so its already at a 3.5 it needs to be a 4 inch and will 215 50 17 fit good on these wheels im not lowering mine. Im coming out SPL retirement and i got a blow through in mine so im go stock height.
Thanks for the reply. I absolutely adore the way it sounds. You should post a in cab 0-60 with it and an exhaust rev + compilation. I know a bunch of people would enjoy and when I was looking for an exhaust for my Hardbody there wasn't many high quality sound clips of hardbodies with aftermarket exhaust.
@@scrapingpavement oh okay Fosho brooo, they look like 18’s I think we have the same ones then but I was like damn how did he get 18’s but thanks for the reply, I fuck with the hardbody ✊🏽
I have a 93 with 18" Cadillac escalades wheels I'm looking to replace the spindles and rear end to Toyota I have a better variety of wheel choice.A friend of mine said that when I replaced the front that the Toyota should just fit right on there like old style Maybe 90 to 94 I think
+Tony White on my bagged hardbody I converted it to toyota 5 lug. The hubs have to be machined to fit further on the spindle to be able to mount nut and dust cap properly.
Glad you guys got her figured out...im sure you missed driving that thing! Love the wheel choice on it, hell yeah brother keep up the awesome vids!
im really digging on the wing and rear bumper sir, awesome work
Oh shit swapped in a regular 4cyl!!! If not a sr20det than have to v6 vg30/33e or something to move faster than the ants on the ground , nice truck in good shape
I want to put a vq35 in mines ^___^
Thanks for the upload and interesting content as always brother.
Static D21 I am working on a VQ35 Swap right now.
Keen on build videos. Good to see it back on the road.
I like the 2 identical toyotas in the background
Dude this truck needs a nice steering wheel, get some deep dish sporty one to complement the wing and stance of the rig
Thats awesome you live in my town that's my old neighborhood, I getting ready to build a lol hard body we might see each other some time
I like the way it sounds
Looks amazing
cool build man !!!! where can i get a rear spoiler like yours ?
+Edwin Romero email me at blazingcustomz@hotmai.com
scrappingpavement where I can get that rear bumper
What side are the tires
beautiful truck
Back in the day Lil Blue was so 🔥
Now its a 💩
@@scrapingpavement 😂
Awesome brother !
Wing looks great did you make it?
Thanks, I did.
cool... why is there a chrome strip on the back wheel well but not on the front
+ROVA_PIET there on all 3 corners except the drivers fender it was replaced at some point with no replacment
oh my bad
Clean HARDBODY
nice truck man I have a 96 hardbody same style as yours. did you change the spindles to lower it?.
Efrain Sanchez Hey bro. Loosen the torsion bars upfront and you can either get 3'' lowering leaf springs and 3" drop blocks to slam the rear a solid 6" or you can keep the stock leaf springs and remove the center monoleaf. Cut and re-drill hangers are a must tho and C-notch for extra low 😝🕺🏾
hey bro i have a 86 I'm trying to make it some what like your. any tips as to what to do.
Will this wing be offered for the d21 ? I want one
I made them for awhile, I no longer have them on the site. But may come out with a different design in the future.
I know this is 3 yr old video but I have a 1994 Nissan Pickup D21 and I need a new engine. I love my truck and mechanics want me to junk it. Have had it for 26 years and most ppl don't understand. My truck is made of steel from bumper to bumper. I'm not letting it go. Can you tell me where to buy a good engine. I know it will not be new but low mileage would be great.
You can actually buy a new engine from baxters. Or you can also find a local engine rebuilder. I had my engine rebuilt. Other wise youll need to get lucky and find a used engine at a junk yard
@@scrapingpavement - Thanks a million times over. Happy New Year!
Happy new year🤙🏼
Gm Did you use spacers for your rims trying to put some titan rims on 18 's but the center is 2 small
+adian green at first I bored the hubs out out but now I running 25mm spacers for a more fitted look
Did you ever hear a nissan with a catalytic converter with a glasspack muffler...i want a nice sound but not rodiculous kind.any suggestions...i know its a old video but i also have a z24i motor...thats why im asking.
I'm running 2.25" pipe, removed cat, knock off version of a magnaflow muffler and dumps at the back of the cab. It's got a real nice sound when starting, idling, and casual driving when I rev it up you get the classic rasp the japeneses cars have but not overwhelming. I will say since the exhaust stops under the cab I do get alot of drone I'm the cab, not great for phone calls lol. But you can avoid that by dropping at the axle or further back.
hows the ride with it notched an spindle dropped ? i did 3" blocks in back an dropped the torsion bars up front rode relay ruff
+Billy Bob good until I lowered even more..shocks are bottomed out.
What is the stance on your truck in this video and how did you achieve it?
2" drop spindles and cranked torsion bars. Mono leafed, 3.75" blocks, re drilled hangers, and a mininotch.
To bore these wheels do you do all 4 or just the front. I got a set of these wheeks tonight.
You need to do both front and back or you can run 1" spacers so you don't have to bore them.
scrappingpavement ok thanks so its already at a 3.5 it needs to be a 4 inch and will 215 50 17 fit good on these wheels im not lowering mine. Im coming out SPL retirement and i got a blow through in mine so im go stock height.
Sorry for the late response ya that would be a great tire choice it will be on the larger side but if your stock height that would be a good fit
Isn't this that one Ginger dude that was always yelling on RUclips?
What transmission did u use?
This is nice bro what wheels are those ?
Nissan titan wheels
Ok thanks bro
What kind of exhaust do you have on this beauty?
+Ruinx83 2.25" with deleted cat and a magnaflow muffler that dumps in front of the axle
Thanks for the reply. I absolutely adore the way it sounds. You should post a in cab 0-60 with it and an exhaust rev + compilation. I know a bunch of people would enjoy and when I was looking for an exhaust for my Hardbody there wasn't many high quality sound clips of hardbodies with aftermarket exhaust.
+Ruinx83 when I get some spare time I tottaly do that!
I want put tire 215/60r17 on my nissan stock suspension? do you think it is probably?
you may have rubbing on turns..
true, thanks!, maybe with 205/60r17 dont rubbing on turns.
Rubraham Gómez 205/40 or 195/40
No shot of the motor?
+CesarConH that will come soon
What size tires you use for Those wheels ?
at one point i ran a 215/45/17 but then switched to a 195/40/17 but now im on 16s with a 205/45/16
Washington state!!! Yea!
I have an '89 Ford Ranger that I'm highly tempted to either drop in a VQ or VH45de into it.
hi what size rims and tire you riding thanks in advance
+adian green 17x7.5 with a 25mm spacer. On 195/40/17
scrappingpavement thanks again
Wear you get the wind
Rohdefab.com
sweet
What size are the wheels?
17s
@@scrapingpavement oh okay Fosho brooo, they look like 18’s I think we have the same ones then but I was like damn how did he get 18’s but thanks for the reply, I fuck with the hardbody ✊🏽
What kind of rims are those?
Nissan titan oem wheels 17x7.5
what kind of wheels do you have on there
+Tony White stock 17" titans
I have a 93 with 18" Cadillac escalades wheels I'm looking to replace the spindles and rear end to Toyota I have a better variety of wheel choice.A friend of mine said that when I replaced the front that the Toyota should just fit right on there like old style Maybe 90 to 94 I think
+Tony White on my bagged hardbody I converted it to toyota 5 lug. The hubs have to be machined to fit further on the spindle to be able to mount nut and dust cap properly.
I have the same rims. I just installed longer studs on the fronts.
is lil blue bagged
Lil blue is static
You do a 4 inch block and a redrill
I want my rear that low