How to make big cuts with cameo 4
HTML-код
- Опубликовано: 12 сен 2024
- In this video we are going to show you how to make big cuts with cameo 4. We will be using silhouette studio free version. If you decide to work on bigger designs, we recommend you get your tape application rollers to make the cutting process a lot easier.
#silhouettecameo4 #silhouettestudio #startyourownbusiness #vinyldecals
OUR AFFILIATE STORE HERE: stickeraficion...
Graphtec vinyl cutter: amzn.to/3pIrIkS
USCutter Titan 28 inch Vinyl Cutter: amzn.to/3yC1jwn
CAMEO 4 (12 INCH): amzn.to/3dPBRvA
CAMEO PRO (24 INCH):amzn.to/3POgbNO
TRANSFER ROLLER TAPE:amzn.to/3e1yYb3
Magnum magnetics 24"x25' : amzn.to/3P6AHdJ
Blank yard signs: amzn.to/2IBiGWM
RAPID TAC: amzn.to/37ZMl5O
Oracal 651 vinyl 10 yard roll: amzn.to/3ulmXRJ
Cutting mat: amzn.to/3uidBWZ
Blue safety ruler (31 inch long) amzn.to/3slsrKy
Squeegee: amzn.to/3bmZK8Q
Small magnets to hold vinyl in position: amzn.to/3kdE6bt
Cutting knife tool: amzn.to/3sbDTYS
Adhesive remover goof off: amzn.to/3eXrNS2
Or get them here: uscutter.com/?...
SUPPORT OUR CHANNEL AND GET YOUR MATERIALS THROUGH OUR AFFILIATE STORE HERE: stickeraficionados.com/rdi-de...
OR JUST USE OUR LINKS HERE:
CAMEO 4 (12 INCH): amzn.to/3dPBRvA
CAMEO PRO (24 INCH):amzn.to/3POgbNO
TRANSFER ROLLER TAPE:amzn.to/3e1yYb3
HTV SISER EASY WEED (12 INCH ROLL):amzn.to/3pMskbB
HTV SISER EASY WEED (15 INCH ROLL):amzn.to/3e1yS3b
SISER GLITTER VINYL:amzn.to/3cnBacO
Or get them here: uscutter.com/?ref=StickerAficionado
Y’all’s videos are very helpful! I currently have a cricut but looking into a uscutter 54” not sure if y’all no much about it but definitely going to get some tools y’all use and watch your videos for more tips!
I just attempted magnets tonight and failed miserably so I’m going to get some of that pray y’all have and attempt it with that because once I put the decal I made for a customer down it would not come up….
Hey, amigo, I appreciate all the tips and tricks you have shared here! That was a great idea, and it was always my challenge to do it when someone ordered a large decal to make and post it. I love your method.
Gracias amigo! Glad to hear that 😎
such a great DIY video. thanks !
You’re welcome! Thanks for watching:)
amistades, dime... how many cuts do you get out of your autoblade 4? i made 15, 3x17 cuts, on some basic vvivid xpo vinyl for practice, and now it will not cut through the backer... is this normal wear on that autoblade? if so, what is my alternative? gracias parceros !@@RDIdecals
I have a problem with cutting such large pieces, as the travel speed is crazy fast between cuts.
It stays in place while cutting and moving at a slow pace, but then it travels super fast with the rollers, and it slips, which in turn makes everything crooked.
You solve my problem for many days I tried to get silhouette on the phone or an email, but they over-technologized the customer service and they never got back to me with a solution. Thank you brother✅🙏😇✝️
Thank you 🙏
I like the silhouette studio software because Ai and CDR can be use as a plug-in for the silhouette software.
I this is a great informative video as always. God bless.
It is a great software 😃. Thanks for supporting our channel!
@@RDIdecals You're welcome
I am trting this method but when i put my vinyl in cameo insrad of going streightmy vibyl start to detrack from thw roller...i dont know what is thw problem
I’m sure you know by now but you don’t have to trace your original designs, you can just duplicate or copy and paste
So what would your calculations add upto
Hello Tyrone! I’m not sure if I am getting your question. Every time we have a project we try to get the measurements asap, then based on surface is how we organize the logo and information. We always use an actual picture while using the measurements we took to get an exact number for our decals. Obviously to come up with a price we have to get an idea of how big the project will be and that’s when Google comes handy. Hope this makes sense, it sounds like a great video idea too.
@@RDIdecals with the price you said that's where Google comes in. How exactly what's been considered. I called a print shop to see what a 49x5 decal would cost they quoted 150.00 however I don't know the factor's for coming up with that price.
Hi, i follow your settings yet i only still got 24 inch limit? im using cameo 4 also... :(
Hello! Sorry for late response. I have know idea what the problem can be, we have done exactly like this several times and have had no problems. Hopefully you were able to figure it out :(
once you select no mat it should be able to let you customize
What would you charge a customer for these large decals.
are you able to use this same method, for vinyl banners????
Hello! Yes, we have made several vinyl banners using the same type of vinyl Oracal 651. I will leave a link to a video, we used a different machine but is basically same process: ruclips.net/video/u_yWv1ioIiM/видео.html
Muchas gracias por tu tiempo ! Very informative !
my custom is 24 inch
how to make big size please!
Enter the size manually in the box
😱😱😱🤯🤯🤯 I could have cut my granddaughter’s LOL Surprise Doll in way less pieces!
It happens! 😅 we didn’t know much about Cameo 4 before getting ours but were happy to learn we could change our settings to be able to cut bigger decals. Thanks for watching!
I wanted to watch it actually cut 😥