Это видео недоступно.
Сожалеем об этом.
Led hood light installation on 2023 Hyundai Tucson | Plug and Play | Tucson Stories
HTML-код
- Опубликовано: 28 фев 2024
- Plug and Play installation of Led hood light with turn signals on 2023 Hyundai Tucson without splicing or cutting wires.
Products used:
Hood light: a.aliexpress.com/_m0oZqpk (1.8m)
Plug extenders: a.aliexpress.com/_mMrhpE2 (2pcs male female)
Circuit tester probe: a.aliexpress.com/_mMrhpE2
Crimper/Stripper Tool: hftools.com/app63307
Posi-Taps: www.ebay.com/itm/235003282712...
Note: I'm not affiliated with any of the above products or the sellers. Please feel free to shop around for better deals.
Probably the clearest tutorial for these LED lights on youtube!
Thank you!
Clearest? I can barely understand him.
Awesome will do it for.mine too
I’m gonna try this
Awesome. To which connector pin is the red wire attached? I have installed it in my car, but it is not always on.
I also faced it. And I changed the red wire connection to fuse tap. Connected to 20amp fuse in engine fusebox. Going to post a video of that soon.
@@TucsonStories thank you
Do you get these extenders for headlights as well ??
I don’t know what kind of plugs are used for headlights but I’m sure we should be able to find extenders if you have a photo of the plug.
Where did you ground the cable?
At 12:35 you can see ground connection. I attached a ring connector to ground wire and used a screw to connect it to car frame.
What size Gauge did you use for wire tapping?
I left the link to post-tap in description. It is around 18 awg, a right fit for the extenders I used. But, original wires are much thinner. If you want to tap into original wires you need smaller taps
Plz give me Flipkart link
@@murtaza4214 Sorry, I don’t know if they are available on Flipkart
Share link online please
All links are in description of the video