🎯 Key Takeaways for quick navigation: 09:04 🔄 *IPv6 unicast routing must be enabled with the command `ipv6 unicast-routing` in global configuration mode to support IPv6 routing on the router.* 10:10 🔄 *To enable RIP (Routing Information Protocol) for IPv6 on a specific interface, use the command `ipv6 rip [name] enable` in interface configuration mode.* 12:10 🔄 *After enabling RIP on routers and specifying participating interfaces, test communication between machines to ensure successful routing in the IPv6 network.* 13:32 🔄 *Check the IPv6 routing table using the command `show ipv6 route` to verify the routes learned through RIP and the directly connected routes.* 14:00 🔄 *The video provides a practical demonstration of configuring IPv6 and RIP on routers, facilitating communication between networks.* Made with HARPA AI
Bang, terimakasih ya berkan abang saya jadi bisa menyelesaikan tugas kuliah saya dengan sangat mudah, semoga abang doberi rezeki oleh tuhan amin, sekali lagi makasih ya bang, sehat sehat ya mwahhh😚😚😚
Hi , some times there is a problem when u use PDU, so to avoid this problem use ping from cmd it will works if you connect all of them together correctly.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
🎯 Key Takeaways for quick navigation:
09:04 🔄 *IPv6 unicast routing must be enabled with the command `ipv6 unicast-routing` in global configuration mode to support IPv6 routing on the router.*
10:10 🔄 *To enable RIP (Routing Information Protocol) for IPv6 on a specific interface, use the command `ipv6 rip [name] enable` in interface configuration mode.*
12:10 🔄 *After enabling RIP on routers and specifying participating interfaces, test communication between machines to ensure successful routing in the IPv6 network.*
13:32 🔄 *Check the IPv6 routing table using the command `show ipv6 route` to verify the routes learned through RIP and the directly connected routes.*
14:00 🔄 *The video provides a practical demonstration of configuring IPv6 and RIP on routers, facilitating communication between networks.*
Made with HARPA AI
Great explanation sir .i really impressed with ur explanation
Nice sir
I am always lots confusion on it
Now it is clear.
Thank you sir, very helpful. very clear
Dhanyabad sir
Excellent ... Well done ....
Bang, terimakasih ya berkan abang saya jadi bisa menyelesaikan tugas kuliah saya dengan sangat mudah, semoga abang doberi rezeki oleh tuhan amin, sekali lagi makasih ya bang, sehat sehat ya mwahhh😚😚😚
You don’t have to modify switches?
Thanx a lot Sir 🙏🙏🙏❤️💕❤️
Sir, i getting internet protocol processing disabled while configuring the interface. please tell me how to correct it
it would of great help
very well explained!
Jhakaaaaas
Is it necessary to add serial port to perform ipv6 routing? Can't we do it without adding the serial ports ?
for sure , u can do it only by gig port
I am getting failed request when i have given PDU
please clarify my doubt
Hi , some times there is a problem when u use PDU, so to avoid this problem use ping from cmd it will works if you connect all of them together correctly.
Wonderful
Thankyou
Failed request ipv6 pc 0 to pc 1
awaz to increase kar la kush anhi sun raha