Thank you for your videos. Networking has been my biggest struggle to understand even after getting certified in Network+. Networking is a very complex topic and I do not have a lot of hands-on, but watching your videos with these labs really helps me understand the overview of what I need to know to figure it out
Maam you have delivered the lecture in a very smooth way 🙂.. Ma'am can u please guide me about how to interconnect different or multiple topologies using dynamic routing protocol.. I'll be able to execute it then.. Thank you and regards 😊
Hello good, do you know why this command does not work for me (router rip-network "IP")? When entering the command it does not generate any error, but when pinging, communication with another subnet is never made.
More or less fine. But your experiment has some mistakes. You do not need to add the networks of other routers. Just add the networks which are managed under that particular router only. RIP will exchange its routing table automatically after the convergence. I hope you will correct your video.
I just tried forgetting one address in a 4 router setup. There was no exchange ... not automatically doing what I forgot. Not even mentioning it. The only message was a (Bad file number) or (Error parsing filename) in IOS Commands. It was first when I noticed the missing one address it started to work. Is it something you have to turn on ? If so, where, please?
Very helpful and good teaching methods but one blunders in this video not focus on commands blur blur word create a difficult to understand plz zooming
Poor video. Lots of skipping around without out explanation. I was able to figure it out but I was not clear at all. Definitely not for novice users. The speed of the video is only useful for people with a stronger background. Need clarity, fluidity, & harmony. Very fast, abrupt & huge gaps of silence without clear explanation of actions or why action at being taken.
Most vedeo that are available having only two router that doesn't clear the concept of routing protocol but your is the best.
Thank you So much Ma'am. I missed my 3 Lab classes 3 hour of each And you show me How to do 9 hour work in 21:27 minutes.
Thx mam
Thank you for your videos. Networking has been my biggest struggle to understand even after getting certified in Network+. Networking is a very complex topic and I do not have a lot of hands-on, but watching your videos with these labs really helps me understand the overview of what I need to know to figure it out
Apu, myself from ECE 17, I never knew that you have such wonderful videos. Its really good
😊 Thank you. I made them so we could rewatch them before the lab final. I'm glad it's helpful to others as well .
You deserve more subscribers
This is the best tutorial that I've ever seen.
Thank you boss you saved me from disaster!❤
Realyy thankful for this video ur saving lifes god bless🙏
You’re the friggin best. God bless
Maam you have delivered the lecture in a very smooth way 🙂..
Ma'am can u please guide me about how to interconnect different or multiple topologies using dynamic routing protocol..
I'll be able to execute it then..
Thank you and regards 😊
It's very simple
There are multiple protocols
Using RIP, EIGRP, OSPF
Today I have start this course
You explain it so excellent 😍
Thank you,The Big Person. This video was so beneficial!
Y2h
This is exactly what I needed, thank you a lot!
Hii Tutor
Your explaining style is unique and superb
I have doubt
What features has EIGRP inherited from DVRP and LSR
Thanx boss you have just saved my day
Thank you so much for the video! I was wondering why you are using a serial connection for the routers? Can you still use ethernet 01 or gig ethernet?
Ok I get it now. I just need to update may Packet Tracer. Thank you
thank u so much i really enjoyed your great job this time
You are good. The best i have ever seen. Do you have any online studies group apart from RUclips?
Just wow
Execellent Video
So Many Thank You
Apu you are awesome. From ECE 19
thanks you, it really helped a lot.
thank you indian person on youtube
thank you Excellent explanation...
Thank you so much, you help me a lot with this video
Thank you teacher👩🏫👩🏫
Thanks again! You are a star!
you re doing good job
Can we combine default routing and dynamic routing in a topology???/
thank you , its very helpful video.
Glad it was helpful!
very wonderful video .... hats off
Dzięki mordo łapa w góre es POLSKA GUROM.
Polibuda GUROM
Excellent ... Well done ...
God bless you ❤️
Thank you! Awesome video, very helpful.
Thank you for sharing. Great content. Really like the way you teach.
This was extremely helpful. Thank you.
Awesome video and explanation
Hello good, do you know why this command does not work for me (router rip-network "IP")? When entering the command it does not generate any error, but when pinging, communication with another subnet is never made.
Thank you for the great video !
Thank you.
It worked
Tnk a lots apu..................
Hello I try the PDU but its always failed. I hope you help me
Same here
@@priyankamanna4550 i solved it I just updated my Cisco Packet Tracer
Great job! Thanks
What am I doing wrong if when I attempt to add a network to the RIP it simply doesn't add it?
I have Data going out from 3G/LTE modem to netgear AC1900 R6900 router in in bound
i didnt see any WIC-2T on my laptop I have HWIC-2T what I will do now?
It's probably due to the difference in packet tracer version.
Great one..Thanks
Why are you not using cli????
អរគុណ💎
Best One...
Awesome vedio ❤️
Thank you ❤
*thank you sooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo much*
TYSM!
Give thanks to you 🔥
More or less fine. But your experiment has some mistakes. You do not need to add the networks of other routers. Just add the networks which are managed under that particular router only. RIP will exchange its routing table automatically after the convergence. I hope you will correct your video.
very true
I just tried forgetting one address in a 4 router setup. There was no exchange ... not automatically doing what I forgot. Not even mentioning it. The only message was a (Bad file number) or (Error parsing filename) in IOS Commands. It was first when I noticed the missing one address it started to work.
Is it something you have to turn on ? If so, where, please?
Thank you ma'am
bro sloved my problem
Great.. thanks alot...
AWESOME
Thanks MM
thank you :D you really explained this properly.
Thank you for the breakdown. This will help me out a lot.
Thank you Mam
helpful to me thank you
Very helpful and good teaching methods but one blunders in this video not focus on commands blur blur word create a difficult to understand plz zooming
Thx a lot mam!
02:18 connect switch to router
Thank you very much
is there anyone who can configure VPN in cisco packet tracer through dynamic routing
Thank you apu.
Make a vedio on eigrp, rip, acl, also
Thanks alot!
very nice
THANKS MAM
routing rip 9:12
gracias
Thanks bro
you need to configure using CLI like real routers and switches
Weldon.
nice
mam cli k through v bata diya karo.
indian accent gives me goosebumps
thx
Love u
Mam this was not executing
👍
plz sent pkt file!
How old are you pal?
I am in my early 20s.
mam pkt file bhi send kr dete
Command se btao na
🧐
sharpened up your spoken language to communicate simply to ur audience
Made it look like 123
Poor video. Lots of skipping around without out explanation. I was able to figure it out but I was not clear at all. Definitely not for novice users. The speed of the video is only useful for people with a stronger background. Need clarity, fluidity, & harmony. Very fast, abrupt & huge gaps of silence without clear explanation of actions or why action at being taken.
jaja paulina cocina
bhen jroori nhi hh english hi boli jaye app hindi hi bola kro,mein mazak nhi uda rha apka pr hindi bologi to or ache se smjh ata
Thank you for your videos