Hey guys, it's been a LONG while since I posted any content. Thanks to all the subscribers and people who commented that they like to see more videos, really gave me an inspiration to try out uploading videos again. I really do hope that the ball will roll again. Cheers!
also, i'm watching this after buying the black version of the case, i just can't wait to be albe to do that myself. but if I had seen this I would've made my mind much faster, great video!
The case says it will take 2 x 140mm fans in the front. Would the fan blades have enough clearance to take advantage of the larger fans or are 120mm the better choice?
@@jerypilapil6560 So I ended up putting 2 x 140mm in the front but had to modify the case with a rotary tool. The larger fans also run into the SSD mounts on the mobo tray, so your SSD(s) have to be mounted underneath in the PSU shroud. Because of that, I only had room for 1 SSD and 1 HDD underneath. Even with the modifications to the case, there is only room for 2 x 140mm in the front. They cover the main part of the inner case but not the PSU shroud, if that's important to you. If I had to do it again, I would go with 3 x 120mm up front.
Hi, the maximum size motherboard you can put inside the case is a Micro ATX, Full ATX boards will not fit inside. As for the 240 AIO, yes you can, as long as the radiator isn't very thick. My current setup in this vid also has a 240 rad on top. I'm using the ID Cooling Zoomflow 240..
@@anthonyellorda8030 I think b450 is good enough for non overclocked loads, even then, slight tweaks on the clocks is still good for b450 as long as you don't do anything too crazy to it. Still depends on the specific model of the B450 board though if it has good VRMs..
I have a Seasonic Focus GX-750 sized at 140mm currently fitted in the case and I would say it's pretty much the max size you can fit in there if you decide to retain the drive cages. If you decide however to use a 140mm, you can put 2 3.5 hdds on the drive cage...
Hey guys, it's been a LONG while since I posted any content. Thanks to all the subscribers and people who commented that they like to see more videos, really gave me an inspiration to try out uploading videos again. I really do hope that the ball will roll again. Cheers!
hello, does b450 tomahawk max is fit in dlm21 case?
Great vid, wish I watched this before I built my PC in the same case
This video made me buy the case, cheers from Australia
hello, does b450 tomahawk max is fit in dlm21 case?
@@itsjedbaby yes, dlm 21 is very big
Liked for the intro, you're pretty good! :)
also, i'm watching this after buying the black version of the case, i just can't wait to be albe to do that myself.
but if I had seen this I would've made my mind much faster, great video!
Glad to see the same gpu as mine. I was worried about the space on the ventilation, so I might getting this. 😍
can it house a gigabyte a320m s2h v2? im still confused on the form factor sizing for the case
It's a micro-atx case
Does this case come with a little speaker wire that connects to mobo?
Good work buddy.
Thanks..!
great review mate ❤
From srilanka
Will this fit my msi z690 mpg motherboard?
And my 360mm liquid cooler radiator?
360 radiator wont fit, fans only. Max 240aio
Where can I buy this product? the Darkflash page doesn't see to sell any product and no stock in Amazon.
Easy pc
The case says it will take 2 x 140mm fans in the front. Would the fan blades have enough clearance to take advantage of the larger fans or are 120mm the better choice?
Do you already have the answer for this? I'm thinking of using 140 mm fans on the front as well as 3rd bottom 120mm fan is kinda useless
@@jerypilapil6560 So I ended up putting 2 x 140mm in the front but had to modify the case with a rotary tool. The larger fans also run into the SSD mounts on the mobo tray, so your SSD(s) have to be mounted underneath in the PSU shroud. Because of that, I only had room for 1 SSD and 1 HDD underneath. Even with the modifications to the case, there is only room for 2 x 140mm in the front. They cover the main part of the inner case but not the PSU shroud, if that's important to you. If I had to do it again, I would go with 3 x 120mm up front.
Did this case allow to use an ATX Mobo (Auros Elite Mobo) and want to have a AIO 240 on TOP of case?
Thanks
Hi, the maximum size motherboard you can put inside the case is a Micro ATX, Full ATX boards will not fit inside.
As for the 240 AIO, yes you can, as long as the radiator isn't very thick. My current setup in this vid also has a 240 rad on top. I'm using the ID Cooling Zoomflow 240..
@@midnightgamingcentral7982 so what do you think b450m motherboard Micro atx is Good interms of performance and VRM?
Thanks a lot kindly reply
@@anthonyellorda8030 I think b450 is good enough for non overclocked loads, even then, slight tweaks on the clocks is still good for b450 as long as you don't do anything too crazy to it. Still depends on the specific model of the B450 board though if it has good VRMs..
I recommend you do more research on this though. I don't have much knowledge on the motherboard specifics..
Hi mate wanna ask u something, did the case fits 160mm length PSU with 2pcs 3,5 hdd? Thanks before
I have a Seasonic Focus GX-750 sized at 140mm currently fitted in the case and I would say it's pretty much the max size you can fit in there if you decide to retain the drive cages. If you decide however to use a 140mm, you can put 2 3.5 hdds on the drive cage...
I'm planning to get this case however I'm rather interested din sa rakk haliya m. which do u think is better?
Dlm21 mesh
i missed you.. :(
does b450 tomahawk max is fit in dlm21 case?
SNAKE REFERENCE
akala ko may free fans na wala pala
1500 ko nakuha sa lazada black hahaha
Meshify
.
Does this case come with a little speaker wire that connects to mobo?
hello, does b450 tomahawk max is fit in dlm21 case?