Very nice! Great driving Oz!👌👌That was an awesome test spot truck had no problems,was really flexed out there a few times and just walked on over doing its thing👍👍very cool to watch bud! great job!
Thanks for watching definitely an improvement for the Gen. 7 I don't know how much my opinion matters but I definitely would recommend these not just for the Gen. 7 but for any type of build😁
I trail ride my gen7 , like on loose dirt and leaves etc. For me the stock axels have the juice in gearing I need to get up loose dirt I cant crawl up . My buddy has the portals , and they are badass tho. Great video man!
I was actually planning on getting some steel bumpers the rock sliders I found some for the gent 7 but they are out of stock on Amain hobby website. I was actually thinking about making my own rock sliders I don't know yet 🤔and for the front bumper I kind of like the one it's on there now trying to find something that looks like that.
I agree. I have the Gen 7 pro. I have all new metal front and rear bumpers. New metal bottom links. Skid plates. Light bar. Winch on the may. But still wasn't enough weight. Then I figure if you soak the tires in water. It helps alot.
Completely new to crawlers, so question. I assume the portal axles lower the gear ratio, increase ground clearance, up the torque? I will receive my Gen 7 Pro tomorrow. I went with the 7, as I didn't like the body on the Gen 8 (silly, I know). I'm only backyard crawling for fun, but should I consider getting the axles in the future, or just put money away for a more capable crawler if I enjoy this aspect of the hobby? BTW: Great run there with the truck. It's a good looking setup.
Thank u for watching 😄. I didn't mind the axles that came on the Gen-7 at all... I would definitely drive it around and see how you like it before you put any money into it. The portal axles are only $99 which is not badd👍 And also you do get a slipper clutch assembly with the portal axle kit which you do not have on your stock Gen. 7. So as long as you don't put too much power in it you should be OK like I said I had no issues with mine but when you're crawlin something will eventually break... And my Gen-8 is just as fast as my Gen. 7 and all depends on your pinion gear..
Yes they are a direct fit U can get them on Redcat website, Amazon, eBay & www.amainhobbies.com/redcat-everest-gen7-portal-axle-upgrade-kit-rer11289/p873117
Oh yeah👍👍Going to be doing some more running videos with the actual gen-8 soon.. I would actually like to do a video with both the Gen. 7 and the gen-8 but I don't have anybody that can drive as good as me and still shoot video haha🤣🤣
I was actually going to do a video soon about that. bud the Austar Are a decent tire I did notice that they were out a little bit faster than a typical pro lines but what do you expect sometimes from knock off tire. They do grip pretty well with a medium foam would probably be better with a rig that's it's a little bit heavier unless you want Swap out the foams to some Softer... Over all there not a badd tire especially if you're on a budget I still will use them just on a different rig...hope that help.
I was looking back through your videos and noticed you had a "B&C R.C." sticker on your old Gen 7 body. Do you have any idea what happened to that channel? He has not posted anything in quite a while. I really enjoy his videos. Hope he is OK. Thank You.
Thank you very much 🙂 I like the Stock Super Swampers that come on the Gen-7 & the Gen-8. The Gen-7 foams are better then the Gen-8 in my opinion... And for these prolines I really like them they do really well on the terrain that we have here. They are on the bigger, around a 4.70 Size in the XL I would recommend them They should fit really nice on your Gen-8 👍
I thinking there working fine for. im still running the Gen -7 Now i just have a Different body on it but it's pretty much running the same setup as this video I am can keep up with most of the newer rc out there Which u can see in my newer vids🙂
@@ozboy8144 that's awesome i have the gen7 pro with portals and for some reason the geometry of the suspension seen off and i followed the instructions in the box passenger side doesn't compress or drop as much as the driver side by the way your gen7 looks sweet!!!👊
Great video man . I have a question for you !! What kind of shocks are you using on this gen 7 ? I got gen 7 sport and its shock are quite stiff . Can you suggest me which shocks should i use ?
Thanks for watching! I'm Actually just running the stock shocks on my Gen. 7 spot. You can always try different shock oil. There is a bunch of different ones out there just measure your shocks. it all depends on your preference of height
I like the Gen-7 Sport bud that Gen-7 does not come with Portal axles. that's an upgrade part sold separately.....The Gen-8 Scout ii comes with the portals axles for $299 The Gen-7 is $199 In my opinion they're both great rigs it just depends on what your budget is
Alright ill look into it the set was looking at had the mount on them or comes with it there metal axles been doing small upgrades like shocks 2.2 wheels tires but was looking at the metal portal axles
Awesome crawling, nice truck and no crap music playing. Thank you for that!
Thanks for watching 😃👍👍
Oldie but a goodie 🙏✝️☮️🏜️
Awesome video excellent truck wicked crawling great driving axles working out great
Thank you for watching bud...And the sweet Compliment😀👍
Great crawl it had no problems with them rocks. Gen7 looks great out there
Thank you I was actually trying to get stuck😀
Added bonus, waterproof, I'm using mine it's used rain or shine. Absolute great value tires and flex are perfect.
Portal axles seem to give you more clearance over rocks and obstacles very nice 👍 upgrade
Ooh ya....definitely help out..😀
That's nice rig my friend~!!👍👍👍
Thank you 😀
@@ozboy8144 👍😁👍
awesome crawling video and love the truck too YOU GOT MY LIKE
Thank you bud preciate you committed on my videos means a lot😁👍👍
Nice job on blocking the light, like how you did up the inner panel for engine bay cause she looks real clean how she is.👍👍👍
Thank you! She just Recently got a new body😁
Very nice driving skills. Nice rig too.
Thank you 🙂
Very nice! Great driving Oz!👌👌That was an awesome test spot truck had no problems,was really flexed out there a few times and just walked on over doing its thing👍👍very cool to watch bud! great job!
Thanks for watching definitely an improvement for the Gen. 7 I don't know how much my opinion matters but I definitely would recommend these not just for the Gen. 7 but for any type of build😁
I can definetly see them being an improvement to any rig.they look good under there too.👍
Very nice crawling big thumbs up my friend XD
Hay bud thanks for watching 😀
I trail ride my gen7 , like on loose dirt and leaves etc. For me the stock axels have the juice in gearing I need to get up loose dirt I cant crawl up . My buddy has the portals , and they are badass tho. Great video man!
That's Awesome 🙂Thank you for watching
Really nice man!!! with those axles it’s just about unstoppable. Great crawling OZ....👍🏻
Thank you Kingston RC.😀 I definitely like it. Some more upgrades coming later on
In my opinion, it looks like that gen 7 could use some extra weight. Like steel front and rear bumpers and rock sliders. Then a winch.
I was actually planning on getting some steel bumpers the rock sliders I found some for the gent 7 but they are out of stock on Amain hobby website. I was actually thinking about making my own rock sliders I don't know yet 🤔and for the front bumper I kind of like the one it's on there now trying to find something that looks like that.
I agree. I have the Gen 7 pro. I have all new metal front and rear bumpers. New metal bottom links. Skid plates. Light bar. Winch on the may. But still wasn't enough weight. Then I figure if you soak the tires in water. It helps alot.
Good portal axle!!
Thank you 😀
Awesome!! 😎
Awesome video and great looking truck. I just ordered one today...
Awesome I hope you enjoy your new rig really appreciate you stopping in and supporting the channel.🙂
Does great-!
Ooh ya....thanks for watching 😀
Beanfield want some portal axles for his Cherokee 😟😟😟😟 gudrun bro 🐢🐢👍
That would look really cool on their Especially if there are redcat one.🤔😀
Great work👏👏
Thank you 👍
Completely new to crawlers, so question. I assume the portal axles lower the gear ratio, increase ground clearance, up the torque? I will receive my Gen 7 Pro tomorrow. I went with the 7, as I didn't like the body on the Gen 8 (silly, I know). I'm only backyard crawling for fun, but should I consider getting the axles in the future, or just put money away for a more capable crawler if I enjoy this aspect of the hobby? BTW: Great run there with the truck. It's a good looking setup.
Thank u for watching 😄. I didn't mind the axles that came on the Gen-7 at all... I would definitely drive it around and see how you like it before you put any money into it. The portal axles are only $99 which is not badd👍 And also you do get a slipper clutch assembly with the portal axle kit which you do not have on your stock Gen. 7. So as long as you don't put too much power in it you should be OK like I said I had no issues with mine but when you're crawlin something will eventually break... And my Gen-8 is just as fast as my Gen. 7 and all depends on your pinion gear..
Good mods brother
Thanks I like it alot😀 thanks for watching
Put a socket on the front for more grip
Thank you I already added some more Weight to the front😁
Best thing since sliced bread
Thank you!
Esse aí é monstro
What size tire?
Proline.1.9 XL Size
What is your suspension setup? And I love the wheel and tire combo. Did you use hub spacers?
Portal axle conversion kit Stock suspension set up hyrax tires Plastic injury to wheels no hub Extenders
Btw can you tell me where you got the portal axles and where they pretty much a direct fit??
Yes they are a direct fit U can get them on Redcat website, Amazon, eBay & www.amainhobbies.com/redcat-everest-gen7-portal-axle-upgrade-kit-rer11289/p873117
@@ozboy8144 10-4 👍✌️
😁👍 Nice! So is it the Gen 8 killer we thought it could be?
Oh yeah👍👍Going to be doing some more running videos with the actual gen-8 soon.. I would actually like to do a video with both the Gen. 7 and the gen-8 but I don't have anybody that can drive as good as me and still shoot video haha🤣🤣
@Bs Rc Dude that would be epic👍
Yeah nice truck and crawl....are those 2.2s
Thank you! they are 1.9 XL Size
@@ozboy8144 10-4 thx
Whats size tires & wheels are you running, they look larger than stock wheels & tires.
Just some proline.1.9 Hirax XL size
Could you give a comparison of the Proline Hyrax and the Austar version? Why did you switch? How are they different? Thanks!
I was actually going to do a video soon about that. bud the Austar Are a decent tire I did notice that they were out a little bit faster than a typical pro lines but what do you expect sometimes from knock off tire. They do grip pretty well with a medium foam would probably be better with a rig that's it's a little bit heavier unless you want Swap out the foams to some Softer... Over all there not a badd tire especially if you're on a budget I still will use them just on a different rig...hope that help.
@@ozboy8144 Thad does help. Thanks. It would be great to see a video about it, too.
I was looking back through your videos and noticed you had a "B&C R.C." sticker on your old Gen 7 body. Do you have any idea what happened to that channel? He has not posted anything in quite a while. I really enjoy his videos. Hope he is OK. Thank You.
He is OK just taken the winner off right now 😀
@@ozboy8144 That's great to know! I'm still waiting for his Gmade BOM build review! Thanks!
Very nice video Do you like those Pro Lines Over the factory tires? They look slightly larger as well. I just got my gen 8
Thank you very much 🙂 I like the Stock Super Swampers that come on the Gen-7 & the Gen-8. The Gen-7 foams are better then the Gen-8 in my opinion... And for these prolines I really like them they do really well on the terrain that we have here. They are on the bigger, around a 4.70 Size in the XL I would recommend them They should fit really nice on your Gen-8 👍
@@ozboy8144 What are those higher called Pro-Line what and I wonder if my factory wheels are too narrow.
@@boostedKTM www.amainhobbies.com/proline-hyrax-1.9-rock-crawler-tires-2-g8-pro10128-14/p540556?v=537237
@@boostedKTM www.amainhobbies.com/proline-bfgoodrich-krawler-t-a-kx-1.9-rock-crawler-tires-2-g8-pro10136-14/p864133?v=635236
@@boostedKTM They will mount up to your wheels I have both of the sets I sent you a link to👍
how do you have your links set up, upper and lower?
I thinking there working fine for. im still running the Gen -7 Now i just have a Different body on it but it's pretty much running the same setup as this video I am can keep up with most of the newer rc out there Which u can see in my newer vids🙂
@@ozboy8144 that's awesome i have the gen7 pro with portals and for some reason the geometry of the suspension seen off and i followed the instructions in the box passenger side doesn't compress or drop as much as the driver side by the way your gen7 looks sweet!!!👊
What size tires
Proline 1.9
Great video man . I have a question for you !! What kind of shocks are you using on this gen 7 ? I got gen 7 sport and its shock are quite stiff . Can you suggest me which shocks should i use ?
Thanks for watching! I'm Actually just running the stock shocks on my Gen. 7 spot. You can always try different shock oil. There is a bunch of different ones out there just measure your shocks. it all depends on your preference of height
Are those 2.2 tires or 1.9?
1.9 XL Size
Wich one you recommend. Gen 7 sport with portal axles or Gen 7 pro stock?
I like the Gen-7 Sport bud that Gen-7 does not come with Portal axles. that's an upgrade part sold separately.....The Gen-8 Scout ii comes with the portals axles for $299 The Gen-7 is $199 In my opinion they're both great rigs it just depends on what your budget is
@@ozboy8144 I will buy the gen 7 sport, and then upgrade to portal axles!
The servo is mounted on chassis?
yes 👍
Does anyone know if the scx10 portal axles will work or is that what your running
I would think thay would work but the Redcat portals comes with the servo relocation mount. So if u get the Scx10iii ones u will need to get the mount
Alright ill look into it the set was looking at had the mount on them or comes with it there metal axles been doing small upgrades like shocks 2.2 wheels tires but was looking at the metal portal axles