Do not miss our New Video - ruclips.net/video/Oq_iWzE9SyU/видео.html Part-List and PDF Drawings - bit.ly/3iUbfJ5 let us know what you think about our Fire Tornado in the comment section thank´s for support guy´s cheers
Very awesome finished product. The only thing I would add to my rocket stove tornado. Would be a shut-off lever. A dump trap door for the pellet feeder before they get near the screen. This would allow you to cut off the flow of pellets. And allow you to save pellets once you no longer need the stove. If something comes up and you need to terminate the burn. If you have a feeder pipe full of pellets. Ending the burn would be difficult unless I missed something. Anyhoo, nice video. Thanks for sharing.
Absolutely Right Paul, that would be a Great Idea, thanks a lot for comment! We are Planing a new Awesome Product meanwhile, will come up start of new Year ! Stay tuned, Have a Great Weekend !
Although there is no commentary, I found this video to be incredibly useful and well-produced. The visuals are exceptional and provide a clear understanding of the topic.
@@Fitumetalworks hi mate thanks for comment, sure all Links to each product are Listed in the Text DIY please have a look at the Link in the description. Let me know if you got it !
szia! Köszönjük szépen a megjegyzést, kérjük, látogasson el a megjegyzés rovatban található linkre, ahol megtalálja az összes rajzot és méretet! Kérlek lájkold, iratkozz fel és oszd meg a videót ismerőseiddel is ;)
@@ejunky66 Thanks a bunch fella. Right back at you with the Merry Christmas and a Happy New Year. Hope you lots of luck with your endeavors and videos too. vf
Yes, you are right in general magnts sould o me that close to any electrical components ! Thanks a lot for comment ! Have a great Weekend,and a Wonderful Christmas ! Do not miss our other Videos, Visit our channel!
Hey, Tip from a Tig welder if you clean the material (Grinding) at the points where you want to weld it wouldnt spark and your TIG welds are looking much better. But also good work keep going.
Hey it is a great project I seen you use 4”glass tube and 4” pipe in your plan how do you fit a graphing wool without having any extra gaps in between❤ ?
Hi mate, thanks for commenting ! It was exactly fitting to slide it in smoothly. I have to recheck as we count in mm, It´s always a bit complicated. I will recheck, count and get back to you !👌
Thank you for all the detailed information, we will build one for sure, questions I have 1. how long will it burn when fully filled with pellets? 2. I gues you cannot shut it down... so it is a matter of letting it burn down all the way? 3. there is no air control mechanism so you cannot control the height of the flame? 4. is there a plan for drilling the holes? What diameters of drills you use for the small and large holes on the burning chamber? Many thanks in advance Ron
hi, thanks so much for comment, actuall not ! But if you like it in Black we offer links to Heat Resistant Paint you can check ! The Burning Chamber it self could change the Color a Bit depend on Thickness of Material used. But the Pellet Chamber itself does not heat up ! Thanks for watching and Comment !
hi mate check out the Link Pdf inside you can find all Parts to Build this Fire Pipe, check out the Full List over here cnc.discount/en/vortex-diy/ Cheers and thanks for comment !
cool build! Friendly tip! You are using either the wrong welding gas or don't have enough/any at all. look into that situation and you will have waaaay better welds/
Good job, I love the conception, just seen a guy doing it as well and he made an access door to fire 🔥the pellets without the need to lift the tube. You’ve done a good job; but please learn how to Tig weld😳 i’m been honest with you, no BS.
thank´s very much for comment, we have used simple tiny Wooden Pellets, please check out the Link in the Description you can Find all Products used in the Video.
thank´s very much my Friend that´s why we made it ! Hope you succeed, you can post your Project on our DIY Facebook Group and give tips to our community ! visit our Website for more awesome Projects elektric-junkys.com
Está muy bien. Pero digo yo . Si se le pusiera arriba del todo otro soporte con un sombrero Chino metálico, no crees que reflejaría el calor para abajo y sería más eficaz para dar calor en el exterior?.
hi, please visit the Link in the Description for clear Instructions ! We were Drilling 8mm Holes let us know how it goes thanks for comment and have a nice weekend !
hi thank you for comment, you can find the Partlist including cutted angles over here cnc.discount/en/vortex-diy/ let us know how it goes ! have a good one
hi, thank´s so much for comment, bit.ly/3iUbfJ5 please choose your Language (sprache) First, then click on download pdf should be in your Language if it not works let us know
@@jatwangismyname900 hi again, are you planing to make it 2 Meters long ? it will surely reach the top. but the wooden pellents material will Burn much faster then advice a Bigger Storage Tank is that right ?
bonjour monsieur, merci pour le commentaire, vous pouvez trouver le lien Amazon direct dans notre plan PDF Veuillez suivre le lien dans la zone de description ! Merry Christmas
hi, have checked just now the Link is working, go to DIY Projects Firepipe and Find all Drawings and Buying Links Thanks so much for comment !❤️🔥🩷❤️🔥🩷
é uma espécie de aquecedor e luz quente, você pode encomendar as peças em nossa loja ou reconstruí-las você mesmo. Basta nos enviar um e-mail meu amigo! Tenha um ótimo fim de semana!
hi, depend´s where you get your Material and how long you need to make it ;) have you visited the Text DIY and Construction Plan? If not have a look here you can easy calculate the costs cnc.discount
hi, thank´s for comment, yes right with the band saw, layed on the flat wide and tighten, adjust sawblade to 30degree and it should work. let us know how your project is going ... cheers check this band saw JET HVBS-712, 7" x 12" Metal Bandsaw, 4 Speed,
Excellent vid bro, well done. Seen many ideas like this, but not as well illustrated. What type of glass do we need, and what's the name of that tape you used to stand the glass on? cheers.
hi, have checked just now the Link is working, go to DIY Projects Firepipe and Find all Drawings and Buying Links Thanks so much for comment !❤️🔥🩷❤️🔥🩷
hi, please check out the Partlist you can directly order it in Amazon, you can choose of Links for America and Links for Europe, Choose Language ! Click on Download Find the Full Drawings and Material Links cnc.discount/en/vortex-diy/
@@ejunky66 I got some stainless of the shelf flue pipe to make it work like a huge rocket stove to heat my house, the idea for the glass tube is to see the flame while burning, got the parts now, didn't connect it yet but will soon
hi thank´s for comment, please check out the Full Partlist with amazon Links over here cnc.discount/en/vortex-diy/ for US for EU Change Language let us know how it goes cheers
Do not miss our New Video - ruclips.net/video/Oq_iWzE9SyU/видео.html
Part-List and PDF Drawings - bit.ly/3iUbfJ5 let us know what you think about our Fire Tornado in the comment section thank´s for support guy´s cheers
Thanks for sharing the draws and meassures!! Really glad x that!!!
i would try this for sell.. here in argentina! 🇦🇷
good job I am amazed, I would like to buy your product, how do I contact you, it is for a personal project.
@@cezarpo Gracias por comentario Amigo, stay tuned for upcoming Projects ! cheers
@@Morpheoiec thank´s very much, please contact us through elektric-junkys.com
@@cezarpo thank´s very much Amigo let us know how it goes ! thank´s for comment 📲
Seeehr stylisch 👌🏽👌🏽👌🏽
Vielen Dank auch für den kommentar ;))
Very awesome finished product. The only thing I would add to my rocket stove tornado. Would be a shut-off lever. A dump trap door for the pellet feeder before they get near the screen. This would allow you to cut off the flow of pellets. And allow you to save pellets once you no longer need the stove. If something comes up and you need to terminate the burn. If you have a feeder pipe full of pellets. Ending the burn would be difficult unless I missed something. Anyhoo, nice video. Thanks for sharing.
Absolutely Right Paul, that would be a Great Idea, thanks a lot for comment! We are Planing a new Awesome Product meanwhile, will come up start of new Year ! Stay tuned, Have a Great Weekend !
@ejunky66 ty, thar sounds great. I look forward to more great products from you! Have a great weekend as well. 👍
really amazing as relaxing
thank´s a Lot my Friend, enjoy your New Years Party
Yea so relaxing
@@tech-guy4817 thank´s
really relaxing good work thank´s for share 🤗
thank´s vey much for comment
Super 👍🏾👍🏾👍🏾
Vielen Dank 😁😁 and a Happy Weekend do not forget to subscribe and share the Video 🤝
Although there is no commentary, I found this video to be incredibly useful and well-produced. The visuals are exceptional and provide a clear understanding of the topic.
thank you very much it´s nice to hear, as you know these days quality or use of brain is not wanted anymore enjoy your weekend
Thank you for putting a material list and a step by step video. Im building one just like yours! Cheers
thank you very much, mention us in your Video and let us know we can Publish it on our DIY Site !
@@ejunky66awesome build mate. Do you know a site that I can get the glass tube from?
@@Fitumetalworks hi mate thanks for comment, sure all Links to each product are Listed in the Text DIY please have a look at the Link in the description. Let me know if you got it !
Great 👍
Thank you for the comment ! Cheers!
Thank you!
You're welcome! Thank´s very much for comment !
Amazing work thank you
Thank you so much for comment Jerry keep in touch
Jungs, geiles Design, aber macht mal bitte 'nen WIG Schweißkurs ;-)
Thank´s for comment my Friend, that was actually the Schweisskurs 🤣 Abonieren nicht vergessen 🤗
Szia. Nagyon szuper munka!
Esetleg az anyagok méreteit meg tudod adni? Mik milyen hosszúak?
Köszönöm.
szia! Köszönjük szépen a megjegyzést, kérjük, látogasson el a megjegyzés rovatban található linkre, ahol megtalálja az összes rajzot és méretet! Kérlek lájkold, iratkozz fel és oszd meg a videót ismerőseiddel is ;)
A great video. I am so glad your back.Keep up the amazing work
thank´s so much for comment Mate ! Stay tuned this year we are coming up with a Lot of Awesome Content for you Guy´s !
Watching this stove is so relaxing. Can watch it for hours. Very nice work fella too.
thank´s very much for comment and we are happy you liked it ! We wish you and your Family a Merry Christmas and a Happy new Year !
@@ejunky66 Thanks a bunch fella. Right back at you with the Merry Christmas and a Happy New Year.
Hope you lots of luck with your endeavors and videos too. vf
@@victoryfirst2878 Thank´s so much ;) stay tuned we are coming up with awesome projects next weeks ;) !
@@ejunky66 Am looking forward to that Sir.
@@victoryfirst2878 thank´s very much, have a nice weekend !🌮
Dude awesome work. But, The magnet should not be too close to the weld 😊
Yes, you are right in general magnts sould o me that close to any electrical components ! Thanks a lot for comment ! Have a great Weekend,and a Wonderful Christmas ! Do not miss our other Videos, Visit our channel!
Hast du auch das richtige Schutzgas, so wie da die Funken fliegen 🤨 normal ist das nit bei wig 🤔
Servus war wohl net ganz aufgedreht 🤨 Danke für den Kommentar 🤝Aboniert und weitergeleitet 🙌
Hi there from Greece... I want to ask you how much pellet i will need for an hour..... I meen the consumption of pellet in ONE hour
hi we were checking it, with our Building Plan up to 2 Hours 1 RefillmenT! Thanks so much for comment and Best Regards to Greece my Helen Friend!
Data sheet only for votrex propellers? No dimensions for other parts?
hi please follow the Link in the Description all should be listed up there. Cheers
Hey, Tip from a Tig welder if you clean the material (Grinding) at the points where you want to weld it wouldnt spark and your TIG welds are looking much better. But also good work keep going.
Good tip! Thank´s for comment Merry Christmas and a Happy new Year !
Hey it is a great project I seen you use 4”glass tube and 4” pipe in your plan how do you fit a graphing wool without having any extra gaps in between❤ ?
Hi mate, thanks for commenting ! It was exactly fitting to slide it in smoothly. I have to recheck as we count in mm, It´s always a bit complicated. I will recheck, count and get back to you !👌
Thank you for all the detailed information, we will build one for sure, questions I have
1. how long will it burn when fully filled with pellets?
2. I gues you cannot shut it down... so it is a matter of letting it burn down all the way?
3. there is no air control mechanism so you cannot control the height of the flame?
4. is there a plan for drilling the holes? What diameters of drills you use for the small and large holes on the burning chamber?
Many thanks in advance
Ron
I can only find the pdf partlist with the drawing of the airflow wings in the subscription of the video
Please shot us an email for detailed informations via the Link in the Descriptionbox Thanks so much for comment ! 🎉🎉😊❤❤❤
ummm cooool but so many question on your "welding" style?? why not just stick weld or maybe turn on the gas? but cool build for sure :)
Thanks a lot mate, yeah we hd that in recent comments already. Have a Great start in the Week !
Hello, the tube dont be black during the use? As the pellet burns? How can i avoid this?
hi, thanks so much for comment, actuall not ! But if you like it in Black we offer links to Heat Resistant Paint you can check ! The Burning Chamber it self could change the Color a Bit depend on Thickness of Material used. But the Pellet Chamber itself does not heat up ! Thanks for watching and Comment !
I am having troubles finding the data sheet you used in the video.
hi and thank you for comment, please check the link in the Descriptionbox
Hello, where can I find fire resistant tubes of this size? Thanks
hi mate check out the Link Pdf inside you can find all Parts to Build this Fire Pipe, check out the Full List over here cnc.discount/en/vortex-diy/ Cheers and thanks for comment !
cool build! Friendly tip! You are using either the wrong welding gas or don't have enough/any at all. look into that situation and you will have waaaay better welds/
Thanks for the tips mate, in some cases "just turn on the Gas" Helps a lot 🤣🙄 have a Great Weekend and let me know how it goes on Nov. 5th !
I love this. But how in the world would you clean the soot off the inside of tha glass? After 2 burns the glass will be hazed and will not look great.
hi mate, i have build a Cleaner with a 2 sided Sponges pretty easy, after 3 Times Use quickly Clean thats it... thanks for comment
@@ejunky66 awesome
@@Klis1517 if got a chance we upload a Video of it soon enjoy your weekend
@@ejunky66 thanks! I'd love to see it.
Good job, I love the conception, just seen a guy doing it as well and he made an access door to fire 🔥the pellets without the need to lift the tube. You’ve done a good job; but please learn how to Tig weld😳 i’m been honest with you, no BS.
thank´s a lot mate hope you subscribed, we will Forward it ;) !! Cheers
Very cool!
hello, your product is very successful. Which wood pellets are you using?
thank´s very much for comment, we have used simple tiny Wooden Pellets, please check out the Link in the Description you can Find all Products used in the Video.
Hola.. soy de bs as,Argentina. Excelente trabajo. Tendrias planos y medidas. Gracias
buenas, gracias por comentario, porfavor chequiando el link en la descripcion. Gracias
I need that mini grinder. where can i get that one?
Hi mate, cnc.discount/en/vortex-diy/
Excellent work, thank you for sharing all this experience. I will make my own
thank´s very much my Friend that´s why we made it ! Hope you succeed, you can post your Project on our DIY Facebook Group and give tips to our community ! visit our Website for more awesome Projects elektric-junkys.com
hi, have you made your own Firetorch already ? 😲
Hi verry nice! But i cant open the link for pdf? Can you send me link please thank’you!
hi thank´s for comment, please visit the Text DIY and click on any Picture it should open up. Cheers let us know
@@ejunky66 thank you i try to do this but i see the flame not higher than 50 cm, what i do wrong? Thank you!
And this after 20 mn
@@natuurvlam have you used the same dimensions of the Burning Chamber ? and did you also add all Holes similar ?
@@ejunky66 yes but if you check youre video is the same not higher if you check other outdoors is easy 2 meter high
I think some setting is off on your tig welding or no gas flow.
thank´s for comment Merry Christmas Daniel, we had different specialists as you could see ;) one of them did not turn the Gas Valve ;)
Awesome build though good work!
Excellent job. Super cool. I’ve found and downloaded the material list. But have you made dimensional plans for this vortex burner?
hi, yeah they should be included !? Thank´s for comment Merry Christmas
Where’s your gas for Tig?
hi mate, not arrived yet, as you know Nordstream is history ... Cheers
Where are the pdf plans that you say are on the website?
hi, coming up the Next week we are working on it .. thank´s for comment enjoy your weekend
Está muy bien.
Pero digo yo . Si se le pusiera arriba del todo otro soporte con un sombrero Chino metálico, no crees que reflejaría el calor para abajo y sería más eficaz para dar calor en el exterior?.
Gracias por comentario amigo :)
Is it save to use it indoor?
hi, i know people that have tried it, and it worked, but i do not advice it, and highly recommend not to do it ! 😂 cheers thank´s for comment
Why does his TIG welding look like stick welding? Did you forget to turn the gas on?
Thanks very much for comment, at the start yes you got it :)) Eagle Eyes !
What are the hole sizes that you drill?
hi, please visit the Link in the Description for clear Instructions ! We were Drilling 8mm Holes let us know how it goes thanks for comment and have a nice weekend !
what type of glass is used for the pipe?
hi, thank´s for comment you can get it right here for EU or US check the Link List click on download. hope that helped cnc.discount/en/vortex-diy/
at what angle profiles are cut? 😃
hi thank you for comment, you can find the Partlist including cutted angles over here cnc.discount/en/vortex-diy/ let us know how it goes ! have a good one
Schönes Projekt könntest du bitte die Bohrschablone teilen, da der Link nicht funktioniert
hi, thank´s so much for comment, bit.ly/3iUbfJ5 please choose your Language (sprache) First, then click on download pdf should be in your Language if it not works let us know
@@ejunky66 Sorry it does't work
@@hubertoos0222 what exactly does not work ? All the Links are working have checked it rightnow
@@ejunky66 Ich kann die Bohrschablone nicht herunterladen
Have you tried it with wood intead or pellets?
not yet but might be a try worth .. will update you on that, thank´s for comment stay tuned for upcoming projects
Hi there I really like your video
There any instructions I can follow? Thank you
thank´s so much ;) have you watched our recently uploaded Video ?
are you selling compete units would love to just buy one
hi, yes we do, pre-assembled or Assembled just shot us an email via our Website elektric-junkys.com cheers
Hi, whats the glass tube made of?
hi, thank´s for comment, the Glasstube is made of glas my friend please visit the DIY Instructions you can find all links to purchase
@@ejunky66 Okay. Another question, if the glass is 2 metres tall, will the flame reach the top?
@@jatwangismyname900 hi again, are you planing to make it 2 Meters long ? it will surely reach the top. but the wooden pellents material will Burn much faster then advice a Bigger Storage Tank is that right ?
@@ejunky66 Does it give off enough heat all around so that people can sit around it?
@@jatwangismyname900 for sure it i as well a romantic Light
Bonjour monsieur ou puis-je trouver un tube de verre ?merci
bonjour monsieur, merci pour le commentaire, vous pouvez trouver le lien Amazon direct dans notre plan PDF Veuillez suivre le lien dans la zone de description ! Merry Christmas
hello sir, have you found what you were searching for ?
Great Fire Torch! Have not seen better. But Dude you need to learn to weld.
Thank´s for comment mate, Working on it! ✌️
I can't find the plan in pdf.
please visit the Link directly in the Video Description. Cheers
Hello. Can you send me the drawings? The link in the video description is not available. Thank you.
hi, have checked just now the Link is working, go to DIY Projects Firepipe and Find all Drawings and Buying Links Thanks so much for comment !❤️🔥🩷❤️🔥🩷
ONDE CONSIGO COMPRAR ESTE CUBO , QUAL NOME DELE , ONDE É USADO
é uma espécie de aquecedor e luz quente, você pode encomendar as peças em nossa loja ou reconstruí-las você mesmo. Basta nos enviar um e-mail meu amigo! Tenha um ótimo fim de semana!
What material is used to feed the fire?
hi, we have used wooden Pellets, thanks for comment
Cam you use sticks as well? Or just pellets?😊
Круто, только на стекло ценник конский)
привет, спасибо за комментарий, это лошадь?
@@ejunky66 конский , в смысле высокий)))) дорогое стекло.
@@Drevopol Поймите, да, это правда, от 10 шт мы можем предложить 40 $ за шт ;)Поймите, да, это правда, от 10 шт мы можем предложить 35 $ за шт ;)
Where did you buy the glass tube ???
Hello again here we go, the Full Text DIY with Instructions Part list and Drawings - bit.ly/3iUbfJ5 hope you like it
Prosiłbym o rysunki techniczne,bardzo mi się podoba i chciałbym to wykonać.
hi, thank you very much for comment, all Drawings and Purchase Links you can find via the Link in the Video description ! Have you tryed that already?
How much to make and sell a 6 foot high item
hi, depend´s where you get your Material and how long you need to make it ;) have you visited the Text DIY and Construction Plan? If not have a look here you can easy calculate the costs cnc.discount
Those 4 metal blades doesn't work properly , might have used 4 thin metal pipes . Which can suck oxygenated air from outside ,
thank you for comment, as you can see it works well in the end, if you have a better solution show us the Link !
hi do you sell them ?
Hi, possible readymade or in Parts ? where are you Located ?
@@ejunky66 ready made, located in France
please get in touch elektric-junkys.com
Hey. How do you do the 30 degree cuts with the band saw? Which saw do you use? Most saws don‘t allow down to 30 degrees.
hi, thank´s for comment, yes right with the band saw, layed on the flat wide and tighten, adjust sawblade to 30degree and it should work. let us know how your project is going ... cheers check this band saw JET HVBS-712, 7" x 12" Metal Bandsaw, 4 Speed,
@@ejunky66 Thx for your answer! Really interessting since most „normal“ band saws do not allow less than 40 deg.
yeah is just about the height that was annoying on the small Band saw can not cut higher than 10cm ;) as you could see have to use the flex anyways ;)
@@ejunky66 thx for the Info. So you can set the saw to 60 degrees?
Hola donde pidria conseguí el vidrio que vidrioes este esmi WhatsApp gracias
hola, de amazon. encontrar los enlaces en el archivo pdf en cnc.discount
Great Job! Did you make the plans? I could not find them on the website.
hi mate, thank´s for comment, Yes we did including Amazon Link List check em out cnc.discount/en/vortex-diy/
I am interested
thank´s a lot here you can Find the Full Partlist with American and European Purchase Links ! pleae visit cnc.discount for more Infos
hi, still interessted ?
Hola amigo cuánto dura una carga
Hola Amigo gracias por la comentario un carga quemar de 90minutos depende usado Materiales
Hi can I buy two of those from you, I'm located in Ohio
If I buy all the tools to make this that going to be expensive 🤣🤣
hi how is it going ? are you still interessted in purchasing 2 of them ?
hi just get in touch if still interested. Happy Weekend 😶🌫
Excellent vid bro, well done. Seen many ideas like this, but not as well illustrated. What type of glass do we need, and what's the name of that tape you used to stand the glass on? cheers.
Thank´s for comment, the Glass is Fireproof and the Tape as well, we try to update the Material List coming days, we will update you .. all the best !
Tig and sparks?????? Thats not a good combination
absolutely mate, thank´s for comment and merry christmas
@@ejunky66 merry Christmas mate
All the gear to weld without the talent to do so.
yeah is like that if you let student´s weld you know. thank´s for comment
Бесполезная ерунда.
thank´s
Hello. Can you send me the drawings? The link in the video description is not available. Thank you.
hi, have checked just now the Link is working, go to DIY Projects Firepipe and Find all Drawings and Buying Links Thanks so much for comment !❤️🔥🩷❤️🔥🩷
Thank you
where did you get that glass tube from?
hi, please check out the Partlist you can directly order it in Amazon, you can choose of Links for America and Links for Europe, Choose Language ! Click on Download Find the Full Drawings and Material Links cnc.discount/en/vortex-diy/
hi, could you find the Glass for the Vortext Tube ?
@@ejunky66 yes found it thnx alot
@@qwertyuiopasdfghjkl2556 thank you too mate ;) have you finished your Project ? how does it work ?
@@ejunky66 I got some stainless of the shelf flue pipe to make it work like a huge rocket stove to heat my house, the idea for the glass tube is to see the flame while burning, got the parts now, didn't connect it yet but will soon
Where do you buy your glass from ?
hi thank´s for comment, please check out the Full Partlist with amazon Links over here cnc.discount/en/vortex-diy/ for US for EU Change Language let us know how it goes cheers
hi, could you Find the Glass for the Fire Torch ?