you prolly dont care at all but does any of you know a trick to log back into an instagram account..? I was dumb lost my password. I love any help you can offer me
@Reese Conor i really appreciate your reply. I got to the site on google and im waiting for the hacking stuff atm. Looks like it's gonna take quite some time so I will reply here later when my account password hopefully is recovered.
Finally brought other buggy to the channel!!! Thanks mate!!! I have a hsp 1/8 wich is more or less the same car and I Just cant be happier. Hope to see more buggys from now on!
I can imagine the 911 call... Operator: 911, what’s your emergency? Lady: TWO MEN ARE.... Operator: Oh god what are they doing?! Lady: THEY’RE..... Operator: What are they doing? Lady: ...DRIVING RC CARS!!!
Great video, new to your channel as my brother in law intruduced me to your videos. just received my pirates 3 zd racing 5 days ago and man I love it, its a no electronics kit that was already 90% assembled in box. I am running a 120amp esc beast with a 2200kv and 3s 5200mah battery 80c. Yes i know 3s... 3s is find for me and this buggy came with a 14t pinion gear which worked decent, however I run a 17t for more top speed. I also ordered a 19,20 and 21t pinion that I am waiting to receive soon and can't wait to try it. I can't run it to hard at the moment thou because it broke... not the trucks fault but mine... I took my eyes off it for 2 seconds to look at the wife's kite and must of sub consciously turned at the same time and ran right into a wooden post that was nearby at about 30km an hour.... if it would of hit straight on it would of survived but the left tire took the full blow and it bent the pin that holds the lower arm on and popped the arm off from the frame. I have a temporary fix on it right now as I wait for the parts to arrive from china *2-5 weeks if im lucky!). was only 21 bucks Canadian for the pin and the left and right arms shipped and tax so its a cheap fix. Id say with the 17t pinion and setup I have it does around 65-70 kmph but that's just guessing. great thou. I never owned a traxxas or anything else other then wltoys rc's so this seems great to me, but im sure if you have used many different rc's in the past you may be more opinionated.
I just got this rc Jan 2021, partially due to watching this review. I have spent entire day getting this thing into running condition. All drive shafts were a "press" fit into the drive cups at he dog bones! The wheel driveshafts were the worst. Taking the car apart I had to Use a screwdriver to pry the cups a bit to get them out. My shafts are plated in a bronze/orange colour. I was able to remove the coating by filing and simply rotating the dog bones in the cups. Some of the coating was cut and a very thin sleeve slid off the pins. The black transmission shaft pins were not pressed symmetrically, again i had to correct that. Next are the diffs, the front one was so tight on the pinion/ring gear, I could count each tooth as it fell into another with in a detent fashiona, rear was also too tight. The sides of the differential housings (output coupling holes side) are not parallel, they are caved in (manufacturing/material defect). Due to this there is physical interference between the inner wall of the housing and the differential plastic hub (opposite ring gear). I had to file down the cup a little, use three 13x16 mm shims to get some clearance here as well as get the pinnion/ring gear to mash well. All screws into aluminium were just drenched in thread locker, had to use heat. Same thread locker was apply onto my front plastic C mount by carelessness eating away at the plastic and causing lots of play at the pivot ball. The motor mount is separate from the centre diff carrier, makes for a messy gear lash adjustment, and keeping the gears parallel is a pain. You-tubers are snapping the wheels at the hub to spokes area, I filled these thin spots with baking soda and super glue. Looks like ESC is not programable??? Yes comes with Dumborc radio, which is great. Body came smashed as the receiver was sitting loose on top of the car, two days and no response from Banggood, they closed my order and now it looks like it is mission impossible to get into contact with them. I only got this car ($350 usd delivered, no batt) because I live in Indonesia and Arrma products are x2 or more western prices. Yes it has lots of good looking components, the above issues however makes it a project and deffenetlyf not RTR, yes it ran out of the box but after purchase I did more digging and found vids showing all these issues. So $35 bucks of shims, a new body and a day of work I have a what should have came in the box. I am done with Chinese shit (have 5 now), the quality is not there. With this one, going up in price and seeing nice looking components I gave them one more and last try.
Couldn't find the video where you troubleshoot and determined that there was no damage video!!! (i went to your live stream channel link in the description) Awesome video, loved it. I've been looking at this buggy (DIY kit version) to use as a plattform for some spare parts I have laying around, looks good. If it can withstand a day at the skate park with you my brother, and come home with no damage, I'm buying it! Please provide a link to the "back in the shop" video for this vehicle, THANKS!!!
Awesome video of the car thanks for the links. Do more of this and if possible could you please consider buying a jlb cheater or any other RC car without electronics and then do a build video of you putting your own electronics like ESC and a motor.
Great video, reminds me of my buggy I had when I was a kid (80's). But that was a toy, this isn't hahaha Would love to see this ZD machine side-by-side to an Arrma Typhon 3s blx, not just sending it to the moon but just testing the pros and cons. Thanks anyway :D
Buggies are so much fun, power to weight ratio is normally mental That looks more balanced off. You should set the esc so there is no drag on the motor. Worth a try ???
Damn! ZD Racing is killing it! I just discovered their shocks and put them on my Arrma Typhon 3s and they are SICK. Love them. My next rig was going to be an Arrma but now.....sheesh! What to do what to do??
Sounds like the gears are meshed really tight and just speculating here but this could have something to do with the tires coming to a dead stop when he lets off the throttle. I know you can set the motor to do braking but it seemed to make sense with the sound of the gears
Bang! Got one! I pride myself on finding the best deals in RTR and this just took the title for #1 over the Losi Tenacity-T which went on sale down to $249.99. After a BangGood new customer coupon, this far superior rig and package came to $257 shipped to SoCal, USA! Hope you get credit for the sale, Kev, I will be in contact with you regarding the online business stuff, too. :)
Glad you fixed the Revo 2.0! Have you considered the straps for the rear suspension? Alot of users on the forums say they really do prevent the rods being thrown out all the time.
Yo Kevin, I really like your cool video's, I watch Them alle the time! But if you say cheap(ish), I used to think they are under 100 bux, but sometimes they are more then 300 bux, I think that is not really cheap. I am a 17 year old boy (almost 18) and I really like, from being child to now, the RC variants. I hope, when I am older, to do this hobby in my free time, same as you. Thx for the beautifull and funny video's! Kind regards, Stefan from holland
When I heard noise it made all I thought was speeeeeeeeeeeeeeed,then I saw more and it looked slow as anything with stock battery, it kinda looks like my HPI trophy but electric
Drag brake a bit on that buggy when it was in the trunk and you hit the gas It stopped instantly like to drag Break was up to high , ZD racing makes nice shit for the price ,that machined 6061 airplane grade aluminum look is everywhere and it’s real nice 👍 that little bugger is Paddles-worth worthy!🤔👍💯
Great vid kev. That woman definitely jealous she's doesn't have a xmaxx👍
haha
Bitter old biddy is bitter.
I would be jealous too
Matt Biggs. Is.. that ..she.. an.
NASA 1 *karen*
Hey Kev, do you have a video where you do a nitro to brushless conversion
I've done it on a traxxas tmaxx
I'd love to see the face of the 999 operator when they receive a call that says:
"There's two guy playing with radio control cars on a BMX track".
you prolly dont care at all but does any of you know a trick to log back into an instagram account..?
I was dumb lost my password. I love any help you can offer me
@Hamza Tristen Instablaster =)
@Reese Conor i really appreciate your reply. I got to the site on google and im waiting for the hacking stuff atm.
Looks like it's gonna take quite some time so I will reply here later when my account password hopefully is recovered.
@Reese Conor it did the trick and I finally got access to my account again. I am so happy!
Thanks so much, you really help me out!
@Hamza Tristen glad I could help :)
Kev: I got yet another car
Me: pliz Don't break I'm already broke and I just fixed you.
Could relate having only one rc
Joseph Apolonio same
Nice video Kev .You should some time take your lambo to the skatepark and bash it to see if it's Kev proof.
Pat- starts shaking the camera
Kev- are you Logan Paul
Lol
Finally brought other buggy to the channel!!! Thanks mate!!! I have a hsp 1/8 wich is more or less the same car and I Just cant be happier. Hope to see more buggys from now on!
I can imagine the 911 call...
Operator: 911, what’s your emergency?
Lady: TWO MEN ARE....
Operator: Oh god what are they doing?!
Lady: THEY’RE.....
Operator: What are they doing?
Lady: ...DRIVING RC CARS!!!
POLICE two guys play on the playground contrary to the regulations
ha so funny
3:10 who else saw the nice Alfa Romeo in the background
the stelvio, it's quite cool
Great video, new to your channel as my brother in law intruduced me to your videos. just received my pirates 3 zd racing 5 days ago and man I love it, its a no electronics kit that was already 90% assembled in box. I am running a 120amp esc beast with a 2200kv and 3s 5200mah battery 80c. Yes i know 3s... 3s is find for me and this buggy came with a 14t pinion gear which worked decent, however I run a 17t for more top speed. I also ordered a 19,20 and 21t pinion that I am waiting to receive soon and can't wait to try it. I can't run it to hard at the moment thou because it broke... not the trucks fault but mine... I took my eyes off it for 2 seconds to look at the wife's kite and must of sub consciously turned at the same time and ran right into a wooden post that was nearby at about 30km an hour.... if it would of hit straight on it would of survived but the left tire took the full blow and it bent the pin that holds the lower arm on and popped the arm off from the frame. I have a temporary fix on it right now as I wait for the parts to arrive from china *2-5 weeks if im lucky!). was only 21 bucks Canadian for the pin and the left and right arms shipped and tax so its a cheap fix. Id say with the 17t pinion and setup I have it does around 65-70 kmph but that's just guessing. great thou. I never owned a traxxas or anything else other then wltoys rc's so this seems great to me, but im sure if you have used many different rc's in the past you may be more opinionated.
you got me back into the rc hobby thanks your videos are awesome wish my videos were cool like yours are.
hi i like ur vids u got me into rc
Hi I like your vids
I just got this rc Jan 2021, partially due to watching this review. I have spent entire day getting this thing into running condition. All drive shafts were a "press" fit into the drive cups at he dog bones! The wheel driveshafts were the worst. Taking the car apart I had to Use a screwdriver to pry the cups a bit to get them out. My shafts are plated in a bronze/orange colour. I was able to remove the coating by filing and simply rotating the dog bones in the cups. Some of the coating was cut and a very thin sleeve slid off the pins. The black transmission shaft pins were not pressed symmetrically, again i had to correct that. Next are the diffs, the front one was so tight on the pinion/ring gear, I could count each tooth as it fell into another with in a detent fashiona, rear was also too tight. The sides of the differential housings (output coupling holes side) are not parallel, they are caved in (manufacturing/material defect). Due to this there is physical interference between the inner wall of the housing and the differential plastic hub (opposite ring gear). I had to file down the cup a little, use three 13x16 mm shims to get some clearance here as well as get the pinnion/ring gear to mash well. All screws into aluminium were just drenched in thread locker, had to use heat. Same thread locker was apply onto my front plastic C mount by carelessness eating away at the plastic and causing lots of play at the pivot ball. The motor mount is separate from the centre diff carrier, makes for a messy gear lash adjustment, and keeping the gears parallel is a pain. You-tubers are snapping the wheels at the hub to spokes area, I filled these thin spots with baking soda and super glue. Looks like ESC is not programable??? Yes comes with Dumborc radio, which is great. Body came smashed as the receiver was sitting loose on top of the car, two days and no response from Banggood, they closed my order and now it looks like it is mission impossible to get into contact with them. I only got this car ($350 usd delivered, no batt) because I live in Indonesia and Arrma products are x2 or more western prices. Yes it has lots of good looking components, the above issues however makes it a project and deffenetlyf not RTR, yes it ran out of the box but after purchase I did more digging and found vids showing all these issues. So $35 bucks of shims, a new body and a day of work I have a what should have came in the box. I am done with Chinese shit (have 5 now), the quality is not there. With this one, going up in price and seeing nice looking components I gave them one more and last try.
Stones hmmmmmmm. Billy: rocks
metal, metal, metal, metal, slipknot, metal
excellent content, by far my favourite recent video from this channel, keep up the great work! i appreciate your hard work
Kevin talbot ,the king of rc cars
Impressive that it held up to a good beating. 👍
Ah, the fun police.
Feels bad man. She didn't exactly look like she was going to shred that track on her BMX later.
yep! if she had come along to use the track we would have left
Fun fact, the sign does say that RC cars are specifically allowed, I remember reading it and being jealous.
It doesn't, it says not allowed
@@h.w.m.306 it says solely for use with rc cars
@@Nathan-qt2zi It says it is solely for the use of bicycles. No radio controlled vehicles of any sort are permitted.
Couldn't find the video where you troubleshoot and determined that there was no damage video!!! (i went to your live stream channel link in the description) Awesome video, loved it. I've been looking at this buggy (DIY kit version) to use as a plattform for some spare parts I have laying around, looks good. If it can withstand a day at the skate park with you my brother, and come home with no damage, I'm buying it! Please provide a link to the "back in the shop" video for this vehicle, THANKS!!!
I just added it :)
Awesome video of the car thanks for the links. Do more of this and if possible could you please consider buying a jlb cheater or any other RC car without electronics and then do a build video of you putting your own electronics like ESC and a motor.
I like your channel for info but I like down to earth people who live my life.
Great video, reminds me of my buggy I had when I was a kid (80's).
But that was a toy, this isn't hahaha
Would love to see this ZD machine side-by-side to an Arrma Typhon 3s blx, not just sending it to the moon but just testing the pros and cons.
Thanks anyway :D
I am afraid Arrma seem to be poor quality in that comparison , but faster especially on 3 s lipo//
Buggies are so much fun, power to weight ratio is normally mental
That looks more balanced off.
You should set the esc so there is no drag on the motor. Worth a try ???
Damn! ZD Racing is killing it! I just discovered their shocks and put them on my Arrma Typhon 3s and they are SICK. Love them. My next rig was going to be an Arrma but now.....sheesh! What to do what to do??
cheerz pimp!
How this zd compares to your typhon 3S? It’s well built?
Straight up knock off Arrma Typhon. One of my favorite RC’s! 👍👍
ThatDrewGuy Knock off? The arrma isn’t the only 1/8 buggy in the world... And this car is completely diffrent!
It isn't a knock off they just look similar, especially at the wheels
“She’s angry cause she ain’t got an xmaxx.” 😂😂😂🤣 great content “stuff the code”. Pat is the man
I've been in the rc would since I was 14 I'm now 28. I love your videos man. Keep up the good work.
Good video Kevin and what a strong 💪 car keep up the hard work
Hey Kev, please more of this beast!!! Really want to pull the trigger hey!!
you are the best rc youtuber!!♥️♥️
That track looks epic
HURRY UP WITH THAT LAMBO VS RC CARS VIDEO KEV, C'MON!!!!
Love when you get new rcs keep up the good work
That pinion sounds tight
Great video cool car
yeh it did a bit
Pretty dope little car.
WOW amazing looks like the arrma typhon."
Love your channel my friend
Pat is in the house
2:59 when you think a book is boring
That argument got heated really quickly
Yo why was that person so mad? it’s not like they was using the track, it was empty 😂
When pat said stuff your code 😂 had me crying with laughter
Hahaha I was creasing the way he said that
Sounds like the gears are meshed really tight and just speculating here but this could have something to do with the tires coming to a dead stop when he lets off the throttle. I know you can set the motor to do braking but it seemed to make sense with the sound of the gears
Love your vids
Killed it on 4s - good though 👍👍
we need an update video for this buggy
i bet the old lady calls the cops on bmx bikers also hahahaha. the cops are like O its the lady again.
Great vid kev Pat's for kraton are a pain
Bought a used bsd racing nitro buggy you got me into rc hopefully I enjoy it
You make it sound so easy selling on Ebay but I do like the videos on here
Bang! Got one! I pride myself on finding the best deals in RTR and this just took the title for #1 over the Losi Tenacity-T which went on sale down to $249.99. After a BangGood new customer coupon, this far superior rig and package came to $257 shipped to SoCal, USA! Hope you get credit for the sale, Kev, I will be in contact with you regarding the online business stuff, too. :)
Pat knows best lol
I've taken my car there and I've never had problems with old people like that😂😂😂
Keep up the good work Kev
It’s a nice looking buggy 😮
Hi Kelvin, i love your video... I am interesting about this car... Do you reccomend?
Thanks
You should put a larger pinion in it and run it on 3s
Love your vids Kev keep it up!!!
That buggy looks like a higher quality buggy? Nice video 👍
No metal, thats a strong metou! 😂
How anyone could think that RC cars are harder on the track than BMX bikes is beyond me
Cool, see if it'll work with a 5 or 6s 😀. Put a 120 or 150 amp esc and you're golden.
Metal montage my favorite
Looks like the original Team Associated RC8 Buggy
Another great video man, i personally ask that you do a yeti rock racer I promise will be a new favorite
To the moon!
Hi love the channel
You should bring out the good old notorious!
Schönes Ding👍😁👌
It is pretty impressive
Haha great video did she actually call the police.
The rc car car goes nyoom. 🏎🏎
Metal lol! Dude you're funny. Great video
Poor Pat 🤦😂
Awesome l love that vid Kev, when are you going to race the XO1 against Lambo?
Glad you fixed the Revo 2.0!
Have you considered the straps for the rear suspension? Alot of users on the forums say they really do prevent the rods being thrown out all the time.
ill look into it cheers
I picked up a set from ebay for £8 , Hot Racing was the brand. Outsourced RC highly recommends them.
She should date Grumpy Old Man who's worried about the nonexistent flowers lol
haha yeh!
At this price point it's best to get a typhon 3s. You can hit 50 and get parts in a hobby shop.
Hobby Media takes forever to get anything to the US from China...like 4 weeks or so....it's been almost 2 weeks for me ordering lipos....still waiting
Yo Kevin, I really like your cool video's, I watch Them alle the time! But if you say cheap(ish), I used to think they are under 100 bux, but sometimes they are more then 300 bux, I think that is not really cheap.
I am a 17 year old boy (almost 18) and I really like, from being child to now, the RC variants. I hope, when I am older, to do this hobby in my free time, same as you.
Thx for the beautifull and funny video's!
Kind regards,
Stefan from holland
great vid
Great video, thumbs up from me 👍👍👍👍👍👍👍👍👍👍👍👍
Sounds like a super tight mesh.
yeh it was a bit
I going away for the weekend, just about fitted my /18th crawlerin my bag!
cool vids keep it up my friends and i like them
@pat's channel gets a rage!🤣🤣🤣🤣🤣
I only watched to see pat get told off lol
hey kev, nice vid!
Tx/rx combo looks like a 4ch dumbo set up indeed
Yo that thing is so fast
Hi Kev is there any spare parts for the car?
I'd love to see you test out the turnigy sabertooth
Must say i love mine done some upgrades much better with different motor and ec and bigger gear
Awesome video
When I heard noise it made all I thought was speeeeeeeeeeeeeeed,then I saw more and it looked slow as anything with stock battery, it kinda looks like my HPI trophy but electric
Is he saying metal or mental? 😅😂😂🤣
Drag brake a bit on that buggy when it was in the trunk and you hit the gas It stopped instantly like to drag Break was up to high , ZD racing makes nice shit for the price ,that machined 6061 airplane grade aluminum look is everywhere and it’s real nice 👍 that little bugger is Paddles-worth worthy!🤔👍💯
I wish he'd do a losi maxxis brushless, anyone else!?🤔
Nevermind! I think he's getting one for the world's fastest crawler!