How To Replace All Engine And Transmission Mounts On A Ford Focus With 2.0l Ecoboost Engine
HTML-код
- Опубликовано: 11 янв 2021
- Brian Eslick from How to Automotive www.howtoautomotive.com takes you step-by-step through the process of replacing all the engine and transmission mounts on a 2011-2018 Ford Focus with 2.0L engine. The mounts were replaced owing to engine vibration.
Affiliate link mentioned in the video for Genuine Ford CV6Z-6068-A Transmission Mount amzn.to/2Xxw2I3
Affiliate link mentioned in the video for
Premium Motor PM5612 Upper Automatic Transmission Mount Compatible with: 2013-2016 Ford Escape 1.6L 4Cyl. 2013-2016 Ford Escape 2L 4Cyl. 2013-2016 Ford Escape 2.5L 4Cyl. 2012-2016 Ford Focus 2 amzn.to/3oFvj39
Affiliate link mentioned in the video for Genuine Ford CV6Z-6038-C Engine Support Bracket, Front amzn.to/3bzirIq
Affiliate link mentioned in the video for Milwaukee 2754-22 M18 Fuel 3/8" Impact Wr- Xc Kit amzn.to/3bB2hy2
Affiliate link mentioned in the video for Mountain (MTNRM6) 5 Piece Metric Double Box Universal Spline Reversible Ratcheting Wrench Set amzn.to/2nr9NC4
Affiliate link mentioned in the video for New Milwaukee 2457-21 M12 Cordless 3/8" Ratchet Kit With Battery Charger Case amzn.to/2isgXli
Affiliate link for How to Automotive Tool Store www.amazon.com/shop/howtoauto...
Website
For more videos, tips, and to purchase recommended tools and products visit my website at: www.howtoautomotive.com/
Stay connected at:
Email: howtoautomotive@gmail.com
Facebook: / how-to-autom. .
Google+: plus.google.com/+HowtoAutomot...
LinkedIn: / brian-esl. .
Disclaimer
Owing to factors beyond the control of How to Automotive/Brian Eslick, it cannot guarantee against unauthorized modification of this information, or improper use of this information. How to Automotive/Brian Eslick assumes no liability for property damage or injury incurred as a result of any information contained in this video. How to Automotive/Brian Eslick recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of How to Automotive/Brian Eslick, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not How to Automotive/Brain Eslick. #howtoautomotive 
Авто/Мото
I especially like the fact you included tq numbers. Good video.
He also cleaned the battery terminals . . . how many techs do that? Treating a customers car like your own; amazing and rare these days.
You have the torque specs backwards on the right side engine mount. It's 66 ft/lbs to the frame, 59 to the engine. Excellent video very helpful, only video I've seen that does all three. Much appreciated.
Just getting into the self car care. And this step by step was very helpful, I have a 2016 Ford focus and want to start doing work my self on the vehicle.
Well we save money, but the way it was hard to change all the motor mout? Or you recomment to hire a mechanic?
THIS WAS AN EXCELENT VIDEO!! A+ QUALITY AND EXPLINATIONS. im doing this job on Friday after thanksgiving so i wanted to see what it was going to take. you made it seem very eazy and straight forward. minus the part with the whole saw i think i got this. THANKS AGAIN!
Hey, I also am planning to do this. Are you still active on this account?
Great video. best I found. Just a tip: you can pull the air box as a unit without disassembling it. You were very detailed so noticed you didn't show or mention reattaching and tightening the air duct to the air box at the MAS sensor - I mention that because I forgot to re tighten the screw once. Wasn't a big deal because it was such a tight fit to start but didn't find it loose until I had to take it off again.
Timely Vlog, I’m replacing my motor mounts on my Acura TL this week. Thank you for sharing this very helpful example. 💪💪💪
Good luck with your mounts👍
Very grateful for this detailed instructional video--I just replaced the transmission mount and saved myself a sizable amount of money!
Made it look easy. Excellent work man. Thanks for sharing this type of content!
Thank you for watching!
Thanks for the video. Got my transmission mount and torque mount replaced with the help of this video.
Wow, great video and explanation! This video was on par with a TV show!
LOVE it when I find the exact video I need! Thank you Sir for a perfect video, cut my time in 1/2 at LEAST and the new motor/trans mounts make the car ride like NEW!
Is hard to do it by ourself? Or we need to hire a mechanic?
Thank you very much for your kind service. God bless you.
Great video man 👍👍. Did a great job explaining everything
Thank you!
Excellent video. Thank you very much!
Thank you for stating the torque specs as you put it back together.
Thank you for watching!
Great video and nice detail!
Brian , good video thanks for sharing.
Thank you!
This video was FANTASTIC! THANK YOU!!!
Thank you for watching!
Well done video amazing step by steps
One of the best instructional video i've seen in my life.
Sub + like is a must.
Great and informative videos. Thanks.
Thank you for watching!
Thnxs for sharing I have fordfocus 2009
It needs to change motormount your video really helps me alot 🙏
Glad to help. Thank you for watching!
Nice & thorough tutorial, thanks!! I'll be changing out the upper passenger side mount on my 2012 Ford Focus Titanium hatchback w/ 5-speed manual as soon as the part comes in (CV6Z-6038-C). I am currently at 120,000 miles & just noticed today that it was past it when I was taking out the MAF & throttle body for cleaning. I was wondering why, lately, she had been feeling rough!!
Hopefully the parts come soon. I’ve been having problems getting parts.
@Joe Brone if you’re not feeling or hearing clunking noises you most likely run them a little longer. You can change one at a time as they go bad.
My 2012 focus only has 88,000 kilometers on it and a engine mount needs replacing as there is vibration inside the car. have already replaced steering rack and camshaft position sensor and the heater core has failed, the brake rotors also need replacing already. mine is the base model LW focus 5 speed manual
Just great video, Thanks
Thanks for the video but I don't recall seeing where to place the floor jack for the different mounts. Do you have another video that shows that? The dog bone mount and the driver's side mount are not showing as available from some ford parts dealer on-line. I will be doing all 3 of mine.
Great video! Thanks
Very helpful video thanks
Thank you for watching!
Thanks for the video 👍. I've got Focus 2014 manual. As I was told, I have to change one of the motor mounts. From my point of view, it doesn't affect vibration on my car. Is it necessary to change it? Will it damage anything more, if I don't change it?
Thanks so much. Nice job.
Well done!
Thank you, great video with lots of useful information. I just got a 3013 Escape with the 2.0 EcoBoost and I'm familiarizing myself with everything it might need. Since the Escape is so heavily based on the Focus, a lot of the information you shared directly applies. I do have one question one comment.
The question is regarding the bracket that you removed with the torque/transmission mount at about 2:30 in the video. It contains a rubber bushing where the torque/transmission mount bolts to it. In mine this rubber bushing has severely degraded, it looks like due to oil saturation from a transmission leak at the driver's side CV shaft seal. Do you know if that bushing fails often or if it is replaceable separately from the bracket?
The comment is that on some of the chat boards people are saying that the OEM CV6Z-6068-A Transmission Mount (also used on the Escape) is not a great design, and that the equivalent part from the Focus ST (CM5Z-6068-A) is supposed to be sturdier but does slightly increase "road feel". I haven't tried it (I am considering doing so), but it seems like a decent number of other Escape owners are saying that it's a good upgrade.
Was the rubber bushing loose on the trans mount bracket for the torque mount? Mine is.. not sure if that's normal or I need it replaced
Hello bro I changed my passenger motor mount today when I make left turns there’s a wierd screeching sound is there something I may have done when lifting the engine
With the battery removal for the left mount, do you have to do anything with the electrics regarding radio codes or anything resetting in the ECU?
Yeah, those bolt biters are super good.
Hey man, do you think that i could do this no problem with with a couple of ramps and or jack stands?
awesome going to change mine out this weekend...are the transmission mounts the same for either an automatic or manual?
I want to do this to my 2016 1L focus, as it's vibrating, engine is turning around when shifting to reverse and every bumb makes a metallic sound somewhere in the bottom. My money is on the torque mount..
But do I have to support the engine with something like a tall pole or something while I remove the old mount? Every other video I've seen says you ned to but here you just rip it out and the engine is just fine
Nice job 🤠👌
Thank you!
My engine is starting to shake. Decided to do a quick inspection on which mount it could be. And found that the torque mount has a gap between it and the frame. Tried adjusting my jack points in hopes that I can close the gap and tighten it back up but it won't change. Could it be that or something else? I'm hoping not to have to buy and replace all three mounts.
Thanks!
Since the video describes the potentially trickiest part--->i.e. removing the rusted battery box 10 mm bolt, (mine severely rusted also), here's one option for anyone concerning these battery acid rusted bolts and preventing bolt strippings Use your PB Blaster, put on your Earmuffs, and tap that flat washer and break the rust fusing the bolts and washers together. Don't just grab your 10 mm and try to loosen it. I know what you may be thinking--"this is a mere small wimpy-assed 10mm bolt--its not gonna give me trouble..." However, Since the WASHER rust build up in my case prevented the socket from even grasping the bolt properly, (and likewise risk stripping the bolt) it was necessary to chissel chunks of rust off of the washer also FIRST. Don't chissel on the bolt ofcourse. Be patient here. It took some time to expose the entire bolt heads again. Any extra tapping only helps that PB Blaster penetrate more anyways. Thanks HowTo for the battery box warning! I owe you a deli sammich. You saved me hundreds and headaches.
what does it mean when the passanger motor mount bracket keep cracking and i
Is this the same process for a 2014 ford fusion?
That is for a manual trans on focus 2012?
As a new owner of a 2014 Focus, this came in very handy as my passenger side mount is shot and leaking oil. I haven't found the torque specs in the description but have I heard it right (I'm not a native english speaker) it's 59 ft lb for the one in the chassis and 66 ft lb for the one in the engine?
where they are located. I have the Ford Focus 2016
Thenkju very well explain
Thank you for watching
My 2018 Focus ST makes a nasty clunk under the car when changing from 2nd to 3rd.
Any guess of which mount may be causing the issue?
I’m guessing the transmission mount?
Thanks I’m advance kind sir
I have a 2013 Focus ST and my lower mount wore out. I replaced it today and the rubber was broken on both sides. My car was doing the clunk thing too, I replaced mine with a Cobb mount in that it is supposed to cut down on torch steer and wheel hop. Tool wise I had to buy a Matco 13" 15mm ratcheting wrench.
Hello and good day to you and your family in these hard covid times , i see that you replace the torque mount early in the video and easy , but what is the part number of the bracket the torque mount connects on to the engine?? ..i cant find it nowhere and its on no videos i have seen since i see none being replaced , but the do go bad so can you please help me out with that part number please
Sorry I don’t know the part number. You’ll need to contact the dealer or your parts supplier to find that out.
What are the symptoms of the transmission mount
How long did it take you to do this?
Hi. I have ford focus 2013 and I have a knock. I changed suspension arms, shock absorbers, what symptoms do you have to change the transmission mount
It’s possible to hear a noise but most the time you just kind of feel movement when you’re accelerating.
@@HowtoAutomotive cuando paso por lugares irregurales.puede ser con o sin acelerar
How much did you charge to replace 3 mount $?
i have replaced it two times and and this is going to be the third time and the transmission shifts hard
How much will this cost if I have to take it to a mechanic or to the ford dealership
How much does it cost to replace the mounts??
Should replace torque arm as well (visible at 21:49) on bottom rear of trans.
Why don't you put the rusty plate that goes on the support?
So there are a total of 3 Mounts all together right?
Yes on this model.
@@HowtoAutomotive
Okay thank you, I originally thought it would have 3 Engine mounts & 3 Transmission mounts. Good thing I was wrong.
Leave it to me to snap the bracket bolt going to my trans 🤦🏻♂️. Now to dig that out ugh
Torque specs for the motor mount are reversed. Engine side should be 59 and 66 on opposite side.
Forgot to re attach air hose, and tighten the hose clamp.
Why reset the clock at the end?
Because the battery had been disconnected.
A4402 Front Right Mount Hydraulic
This will fit is the same right,
When you reach for your special sockets I reach for my old imperial sizes. 😂
Figures... my 2012 has an fat ac line mounted to the bracket, no real flex.... hoping he would show how easy it was without evac of ac... hmmm nvm then lol
you failed to mention the 3rd mount
Which is the 3rd mount?
@@greglopez2217 transmission torque mount
I hope you didn't let the customer leave without attaching and tightening the hose clamp on the intake tube where it connects to the mass airflow. Other than that great job and thanks for the tutorial as I am about to do it on my daughters Focus.
Only 64k miles and the mounts are toast!?
Yep I see it all the time. They don’t necessarily break but they do breakdown and compress causing vibration.
@@HowtoAutomotive Yes it's only by comparing them to a new mount that you see how compressed the old ones are.
Good job on the repair. Nice touch refilling the washer fluid reservoir; it's the little things.
This does not include 2011. 2011 is mk2 which is so much diffrent i owned one😅
Don’t do this job yourself. It is a lot harder than this guy makes it out to be. He skips the difficult steps
I wish my subframe looked that good lol, having to replace mine due to heavy rust 😢
Thanks !!!!!
Thanks!
Thank you very much!