Thanks for posting this video up, it’s good to see some of the loom routing on another Giant Ebike, when you’re in the seventh level of hell during the motor reinstall! It would be great if you did a video where you real-timed the install in steps. I bet you would get a shed-load of views from people rewatching each step.
hello.. I moved the speed sensor to the pedals to go faster and the syncdrive warning appeared on the display and the engine runs intermittently even though I put the sensor in its place. it still runs intermittently.. what can be done? Thanks!
How much does the software option cost? And are both pedal cranks right hand thread, I tried removing my right hand one and it went very tight trying to undo it. it cracked off as expected but then went tight?
$300 AUD for the software option, Going tight after cracking off may be the locktight on the threads adding some resistance. Typically The left pedal has a reverse thread and the right a normal thread
If you want to change the charging port is it almost the same process you've outlined to get at the cabling ? Or can you just unscrew the port and pull the cables out to unplug them ?
It’s a nightmare to cram all those wires back in there. I had to slightly push on the motor to get it back in. Have you ever had an issue with any wires being pinched or cable ends taking in water from being fiddled with?
It sure is a nightmare to get the wires in! No issues so far most people go with the software unlock we offer as it quick and easy so not many of these have been done.
Yeah I feel you, lucky these things are so heavy, I wanted to throw the whole bike through the window! But yeah, ensuring acceptable bend radius’s and not crushing anything is the challenge.
@@dalebarrett6003 The software works in the UK . We are the distributors for Australia and New Zealand. Contact Eplus in Italy directly to find out if there is anyone performing the upgrades in the UK
@@EpiceBikes Hi guys, tell me about this software method. It is true that it change the circumference of the wheel and will affect wrong data f.e. in app ? A eplus dealer in my country told me that (but was no sure 'cause never unlock giant bikes).
I can’t get my wires and plugs situated properly at all been trying for days now really annoying even removed the speed chip and tried without still no luck 😡
Hi Mate, Our giant tuning products are available here: epicebikes.com.au/product-category/giant-speed-unlocks-upgrades/ Our software unlock allows speeds up to 70km the hardware chip unlocks to 50km
Hi Danial. I have a Giant Talon E+ 29 1 2021 model with Yamaha Syncdrive Core motor. I purchased a Volspeed 3 chip about a month ago and wasn't able to get around to install it until tonight. I took the covers off the motor and could only see 1 wire so I figured I'd have to drop the motor down to access the wiring harness. So I searched RUclips to find this vid. At the beginning you mention a software upgrade that basically negates the need for the chip. I like the sound of that! Could you steer me to a url that describes this process in detail and also costs and equipment needed. Thanks
Falta la explicación de cómo activar el chip, se tiene que encender la bici y luego presionar el botón de remolcar la bici y después el de subir potencia
@@alejandroyaurivega lo puedes comprar por Amazon, , seguro que hay talleres que lo monta, yo me lo hice y no fue muy complicado ( solo me costó volver a cerrar el motor).
Thanks for posting this video up, it’s good to see some of the loom routing on another Giant Ebike, when you’re in the seventh level of hell during the motor reinstall! It would be great if you did a video where you real-timed the install in steps. I bet you would get a shed-load of views from people rewatching each step.
Such a pain..had to change dropper post cable housing and it’s a nightmare to get all the wires to fit.
Hi is this chip compatible with all the functions of the Giant ride app?
.
hello.. I moved the speed sensor to the pedals to go faster and the syncdrive warning appeared on the display and the engine runs intermittently even though I put the sensor in its place. it still runs intermittently.. what can be done? Thanks!
hello, which speedbox is possible for the GIANT entour E+1 2021 with Yamaha engine. I'd love to hear it, thank you so much
are these motors repairable if not running
How much does the software option cost?
And are both pedal cranks right hand thread, I tried removing my right hand one and it went very tight trying to undo it. it cracked off as expected but then went tight?
$300 AUD for the software option, Going tight after cracking off may be the locktight on the threads adding some resistance. Typically The left pedal has a reverse thread and the right a normal thread
2020 model?
Does it work for Hiant estorm+?
Hi do you think I could install a throttle in my 2017 giant Ebike?
I'm wondering the same thing
It may be possible but would likely require complete disassembly of the motor and fitment of an aftermarket motor controller
Hi can you help me i cant start my ebike giant no power did you know about this problem tnx
Hi, can you please provide a link where we can buy the chip and new wiring loom thanks ?
epicebikes.com.au/product/giant-speed-unlocker-chip/
If you want to change the charging port is it almost the same process you've outlined to get at the cabling ? Or can you just unscrew the port and pull the cables out to unplug them ?
Hi mate, where are you located i would brong my bike to get one of these chips? I have a giant trance e+29 2021 thanks
You can find our locations here epicebikes.com.au/agent-locator/
@@EpiceBikes oh cool perfect I'll come to sydney and see you soon man thanks, also can i ask which branch you are? And your name? Thanks
Can I use this chip to Giant Trance e X pro 2021 ? Only this or can I use another one
Hi Mate, Both our solutions suit that bike epicebikes.com.au/product-category/giant-speed-unlocks-upgrades/
It’s a nightmare to cram all those wires back in there. I had to slightly push on the motor to get it back in. Have you ever had an issue with any wires being pinched or cable ends taking in water from being fiddled with?
It sure is a nightmare to get the wires in! No issues so far most people go with the software unlock we offer as it quick and easy so not many of these have been done.
Yeah I feel you, lucky these things are so heavy, I wanted to throw the whole bike through the window! But yeah, ensuring acceptable bend radius’s and not crushing anything is the challenge.
Hi m8,
When installing the ship is ok , i have to set up the controler from my smart phone or it's ok ?
No Smartphone app is required for this chip
Thanks Legend 👍🍺
How can I get the software upgrade?
Here is a link to learn more about the software unlock epicebikes.com.au/product/giant-trance
@@EpiceBikes doesn't the software work in the UK?
@@dalebarrett6003 The software works in the UK . We are the distributors for Australia and New Zealand. Contact Eplus in Italy directly to find out if there is anyone performing the upgrades in the UK
@@EpiceBikes Hi guys, tell me about this software method. It is true that it change the circumference of the wheel and will affect wrong data f.e. in app ? A eplus dealer in my country told me that (but was no sure 'cause never unlock giant bikes).
@@Beverly70210 yes that's correct if you have a speedometer or app that reads speed from the bike it will no longer be correct
I can’t get my wires and plugs situated properly at all been trying for days now really annoying even removed the speed chip and tried without still no luck 😡
It is very difficult on the giant bikes, There is a lot of cables and not much space for them to fit
Where can i get this chip from? How much is it and how fast i go with this chip thanks
Hi Mate, Our giant tuning products are available here: epicebikes.com.au/product-category/giant-speed-unlocks-upgrades/ Our software unlock allows speeds up to 70km the hardware chip unlocks to 50km
Hi Danial. I have a Giant Talon E+ 29 1 2021 model with Yamaha Syncdrive Core motor. I purchased a Volspeed 3 chip about a month ago and wasn't able to get around to install it until tonight. I took the covers off the motor and could only see 1 wire so I figured I'd have to drop the motor down to access the wiring harness. So I searched RUclips to find this vid. At the beginning you mention a software upgrade that basically negates the need for the chip. I like the sound of that! Could you steer me to a url that describes this process in detail and also costs and equipment needed. Thanks
@@michaelstanton297 0
Falta la explicación de cómo activar el chip, se tiene que encender la bici y luego presionar el botón de remolcar la bici y después el de subir potencia
Hola soy de españa madrid dnd y como podria ponerle el deslimitador??
@@alejandroyaurivega lo puedes comprar por Amazon, , seguro que hay talleres que lo monta, yo me lo hice y no fue muy complicado ( solo me costó volver a cerrar el motor).
sure
looks like a mess of wire for Yamaha motor if anyone ever work at . Water or muds get in easily .
It’s big mess. For making that ..