By using reboot command will it going to Reboot(restart )whole pdu or just the management console? Reboot required means pdu needs to be shutdown and start again?
If there is already a device plugged in to the APC UPS ex. network switch that is production, and you want to configure the APC UPS's management monitoring, the reboot part, will it affect also the network switch that is connected like it will shutdown? (say your network switch has no redundant power supply) Or the reboot part of the UPS after you configured the TCPIP, the battery will still kick in so it will not affect the network switch / device? Can you also configure in the APC UPS's management to send a email alert say if the UPS is on battery mode?
You can read UPS Management Software Guide here: www.apc.com/us/en/support/product-support/ups-management-software-guide.jsp#:~:text=APC%20PowerChute%E2%84%A2%20is%20a,and%20providing%20energy%20management%20capabilities.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
When you purchase apc ups srt3000 it doesn't include the network management card?
Yes, the network card is not included!
Purchased separately!
Does it always need a 120v 30amp input, or can you limit it in software?
By using reboot command will it going to Reboot(restart )whole pdu or just the management console?
Reboot required means pdu needs to be shutdown and start again?
reboot command is just an effect on the management card, it doesn't reboot the whole ups.
Hello everything is fine ?
Can I install a board with the UPS connected to electricity?
No!!😂😂😅
If there is already a device plugged in to the APC UPS ex. network switch that is production, and you want to configure the APC UPS's management monitoring, the reboot part, will it affect also the network switch that is connected like it will shutdown? (say your network switch has no redundant power supply) Or the reboot part of the UPS after you configured the TCPIP, the battery will still kick in so it will not affect the network switch / device? Can you also configure in the APC UPS's management to send a email alert say if the UPS is on battery mode?
Rebooting the specific part is not reboot the whole systems thus it will not effect providing power to your devices, hope this help.
Kindly can u tell the perfomance
How can I see the mac address in the display? What option on display should I enable?
Usually, an APC ups network management card has a white sticker showing the MAC address on the back of the UPS
how we can have all APC UPS in one network and monitor from centralized. ?
You can read UPS Management Software Guide here:
www.apc.com/us/en/support/product-support/ups-management-software-guide.jsp#:~:text=APC%20PowerChute%E2%84%A2%20is%20a,and%20providing%20energy%20management%20capabilities.
What would be the password and username for putty?
The default username and password are both '' apc '' .
👏👏👏👏
Nice
Thanks