I just got my Panther X2 as well but I feel kind of blind with it. I have a Syncrobit Miner as well and it has been nothing but a headache and I figured I would plug in the X2 and be very happy moving forward. I hit 2 road blocks so far. 1. I couldnt register the device on Ethernet, I had to select Wifi just to get it registered. Now my device has 2 IP addresses and I want to only have 1 so I can port forward correctly. 2. I cant find a way to gain access to this device. Does it not have a Web interface? My syncrobit has a web interface so i can make changes to the device and see what is going on. Thanks!
Hi Artur, 1. That's weird tbh, Ethernet should usually work perfectly fine. I had ran it via ethernet in my first location, and it worked normally. Not fully sure regarding the duplicate IP addresses. For the miner you should only have one fixed IP for the device itself. 2. There is an accessible dashboard, but it was developed via github. You can find more info here: www.reddit.com/r/PantherX/comments/rjjkk8/dashboard_is_here/ I haven't yet used it myself. Hope that helps in some way.
Hey Bola, the X2 is just an upgraded version mainly extra storage , currently it is the only version available. Functionality it should run the same, but can not confirm as I have not tested the X2 yet.
Tried my Bobcat 300 miner and was a total waste of time. 0.13 HNT after 10 days. Nothing wrong with the miner, I just live in a very, very congested area with other miners so earnings are useless. When I ordered there were virtually none where I live, 10 months later it is rammed full of them. Put the miner on eBay. Good luck to the next person.
Juat bobcat repackaged at a higher rate. I am trying to link the business so I can blast them on video. They leveraged our waitlist money to fabricate scarcity and rebranded to sell at an inflated rate.
Hi Crayban. I’ve just received my bobcat and managed to get synced within 24hrs and using the stock antenna supplied. I purchased a Nebra High Gain Omni Antenna with 5M cable RP-SMA antenna. My question is can this be used with a bobcat 300? The actual cable connection fits straight in to the Lora connection, just wondering from the ‘update antenna’ drop down menu in the helium app which one needs to be selected if indeed it can be used? Forgive me complete newbie I just read it offers 6dBi and can be used with various helium miners if this helps
Hi Frankee, no problem, happy to help. It should run perfectly fine with the RP-SMA male port on the cable, as the Nebras have the same Lora port as the Bobcats. From the drop down menu select custom, and type in the dBi of the antenna manually. You don't have to select Nebra.
Hi crayban..like always!great vidéos !...i have a question for you or other people on the chat...im mining helium and i dont understand why one day on my wallet exemple i have 13 $ in helium and the next day or 2 days after i have 11,34$ in helium on my wallet...i dont understand....if you have an answer or somebody else has one..plz tell me ...cuz its weird...THANKS=)...keep up the great work
Hi Michael, if you check the HNT you should see that it stays the same, but the price will always change based on the crypto market. You can view the live prices of the coin here: coinmarketcap.com/currencies/helium/ The aim should be to keep mining till one day HNT is at a high price to take out profits.
@@Crayban tru!..THANKS a lot...completely forgot about price movement...silly me...thanks again !...think attention disorder kicked in...lol...tought i was getting hacked...U B GOOD🤜🤛👍
all on board Panther X. waiting for 5 to arrive 🚀 Lets gooo
Also now stacking up on a bunch before they sell out.
I just got my Panther X2 as well but I feel kind of blind with it. I have a Syncrobit Miner as well and it has been nothing but a headache and I figured I would plug in the X2 and be very happy moving forward. I hit 2 road blocks so far.
1. I couldnt register the device on Ethernet, I had to select Wifi just to get it registered. Now my device has 2 IP addresses and I want to only have 1 so I can port forward correctly.
2. I cant find a way to gain access to this device. Does it not have a Web interface? My syncrobit has a web interface so i can make changes to the device and see what is going on.
Thanks!
Hi Artur,
1. That's weird tbh, Ethernet should usually work perfectly fine. I had ran it via ethernet in my first location, and it worked normally. Not fully sure regarding the duplicate IP addresses. For the miner you should only have one fixed IP for the device itself.
2. There is an accessible dashboard, but it was developed via github. You can find more info here: www.reddit.com/r/PantherX/comments/rjjkk8/dashboard_is_here/ I haven't yet used it myself.
Hope that helps in some way.
我是黑豹代理商,可以联系我拿货,现货且比官网价格还低。
Hey Ibrahim, not yet, until the UK provide an open source 5G frequency band for companies to build on.
LOVED THE VIDEO! I currently have a bobcat at my residence. I might swap that for my X2 now and send the Bobcat to another location. Let's see.
Thanks Ben. Let us know how it goes, would be intrigued to see if there is any difference. However teh 4dbi stock on the bobcat is quite powerful.
@@Crayban I never use the antennas that come with the unit. I have a 40 foot channel-master adjustable mast with an rak 8dbi. 😊
@@princeben7544 haha, same here. I run a test for a few days, then I immediately switch.
5% Panther X discount code: CRAYB5
panther-web.myshopify.com?p=HJladmZeq
Straight and direct information. What's the different between Panter x1 and x2?
Hey Bola, the X2 is just an upgraded version mainly extra storage , currently it is the only version available. Functionality it should run the same, but can not confirm as I have not tested the X2 yet.
@@Crayban thanks for the response, might get one soon before its gone crazy to order
Tried my Bobcat 300 miner and was a total waste of time. 0.13 HNT after 10 days.
Nothing wrong with the miner, I just live in a very, very congested area with other miners so earnings are useless. When I ordered there were virtually none where I live, 10 months later it is rammed full of them.
Put the miner on eBay. Good luck to the next person.
I've had the same issue with my London based miners. Honestly have tried to switch all of their locations out of London for now.
@@Crayban considered moving mine from Manchester to Sheffield where my mother lives but CBA
Juat bobcat repackaged at a higher rate. I am trying to link the business so I can blast them on video. They leveraged our waitlist money to fabricate scarcity and rebranded to sell at an inflated rate.
I don't think they are related in terms of production. On one of Panther X's videos it's marketed as Bobcat killer lol.
And as always , thanks for sharing
Nice video. What is the connector of the Panther X2 for the antenna?
Hey David, it's an SMA-K, have not got it in hand yet, so will confirm once it arrives. :)
@@Crayban has it already arrived, if yes how is it working?
Hi Crayban. I’ve just received my bobcat and managed to get synced within 24hrs and using the stock antenna supplied.
I purchased a Nebra High Gain Omni Antenna with 5M cable RP-SMA antenna. My question is can this be used with a bobcat 300? The actual cable connection fits straight in to the Lora connection, just wondering from the ‘update antenna’ drop down menu in the helium app which one needs to be selected if indeed it can be used? Forgive me complete newbie I just read it offers 6dBi and can be used with various helium miners if this helps
Hi Frankee, no problem, happy to help.
It should run perfectly fine with the RP-SMA male port on the cable, as the Nebras have the same Lora port as the Bobcats. From the drop down menu select custom, and type in the dBi of the antenna manually. You don't have to select Nebra.
@@Crayban thanks very much for the info it’s much appreciated 👍🏻
@@frankeewizz4826 No probs anytime 👍🏻
Hi crayban..like always!great vidéos !...i have a question for you or other people on the chat...im mining helium and i dont understand why one day on my wallet exemple i have 13 $ in helium and the next day or 2 days after i have 11,34$ in helium on my wallet...i dont understand....if you have an answer or somebody else has one..plz tell me ...cuz its weird...THANKS=)...keep up the great work
Hi Michael, if you check the HNT you should see that it stays the same, but the price will always change based on the crypto market. You can view the live prices of the coin here: coinmarketcap.com/currencies/helium/ The aim should be to keep mining till one day HNT is at a high price to take out profits.
@@Crayban tru!..THANKS a lot...completely forgot about price movement...silly me...thanks again !...think attention disorder kicked in...lol...tought i was getting hacked...U B GOOD🤜🤛👍
@@Atomos_DRIVEhaha, no worries, always happy to help :) 🤜🤛
Thanks for the update bro.
Keep up the good work
👍🏻 Thanks for the support Bashy.
Great video Crayban! Thx bro!
Anytime CJ :)
Nice work mate, love the content as usual
Thanks Zeno, hope it is of help :)
First viewer !!
Most welcome MG :)
Top bro!
Appreciated Robert, as always :)
@@Crayban btw nice work you do bro what do you use? for video thanks in advance
@@robertVandelanotteonlinemoney thank you. The main program I use is Abode Premiere Pro and sometimes After effects.
@@Crayban thanks bro