Please note that in this video, the engine push start is started by depressing both the clutch and brake, please do watch [PART 3] on how to bypass clutch. Thank you!
I just installed my first alarm /remote start about a month ago. I had the same question and from what I gathered from other professionals it doesn’t matter as long as they are both connected. I’m a 12v professional as well but never done one of these and they are nerve wracking
Honestly, for how long you are going to keep your car, just stick with the key in method. This is a lot of work and a lot can go wrong. If you are a skilled DIY, go for it. Otherwise, avoid this.
Hi bro, how to connect if my car got two wire starter and two wire 12v? Is it can be loop and two wire starter to alarm wire starter and Loop two wire 12v to alarm wire 12v? Please advised😅
Hi sir, i believer you have the same set up with my friend. For the 12vdc sir, 2 pins right? you can connect to both wires using jumper or you can connect it to only one, just choose the larger wire. For the starter, they're connected on the same pin but 2 wires, right? Just connect the wire to the both of them sir.
Bro, just like to ask, i have followed the manuals and watch your videos several times, however my push start doesn’t “on” when i pressed the brake pedal it gives light to the start/stop button, but does not engage in either acc or start. Do u have idea for corolla 2016?thanks in advance.
bad move makeing it push start that's asking for it to be stolen should stay useing key i would never buy a keyless car nnnnnnnnnoooooooooo way but it's good how it works
![Megan Thee Stallion - Mamushi (Remix) [feat. TWICE] [Official Audio]](http://i.ytimg.com/vi/5c0_u9PsrsQ/mqdefault.jpg)
Please note that in this video, the engine push start is started by depressing both the clutch and brake, please do watch [PART 3] on how to bypass clutch. Thank you!
What did you do with the black ring you took off the ignition?
What about 5p systems with just one Ignition, should both IGN1 & IGN2 be wired on parallel or just use IGN2? thanks
It works also on Renault Laguna 2 Facelift 2005 (model Keyless) ?
How do your know which is ignition 1 ND which is 2 on the car? Is there a problem if they are switched?
I just installed my first alarm /remote start about a month ago. I had the same question and from what I gathered from other professionals it doesn’t matter as long as they are both connected. I’m a 12v professional as well but never done one of these and they are nerve wracking
Thank you
Would I be able to unlock car remotely with Toyota app?
Can i install this in a boat? Volvo penta ?
I have got to turn ACC and ON but can't get it to crank over. Is there something i missing?
Security chip?
Sir can i ask if all toyota cars have the same wirring color code?
why are you calling him sir? is he your boss?
Hello sir. What to do po sa original toyota security system pag mag install po ng ganito with remote start?
Honestly, for how long you are going to keep your car, just stick with the key in method. This is a lot of work and a lot can go wrong. If you are a skilled DIY, go for it. Otherwise, avoid this.
Hi bro, how to connect if my car got two wire starter and two wire 12v?
Is it can be loop and two wire starter to alarm wire starter and
Loop two wire 12v to alarm wire 12v?
Please advised😅
Hi sir, i believer you have the same set up with my friend. For the 12vdc sir, 2 pins right? you can connect to both wires using jumper or you can connect it to only one, just choose the larger wire.
For the starter, they're connected on the same pin but 2 wires, right? Just connect the wire to the both of them sir.
*believe
can i use the unit in any brad of car or aplicable only for toyota?
?
Applicable to any car sir, but the ignition wiring is for vios for this video.
What did you do with the old ignition?
It was just there inside sir, ready to be plugged if you want to return to original ignition key
Bro, just like to ask, i have followed the manuals and watch your videos several times, however my push start doesn’t “on” when i pressed the brake pedal it gives light to the start/stop button, but does not engage in either acc or start. Do u have idea for corolla 2016?thanks in advance.
The only way I could do that
where we connect oip path dedection wire i dont get it
The wire for oil detection is just tapped in the ignition 1 sir
The music annoying😫 wtf why??
Anyone can step in the car and start the car even if you lock it and go?
No, it detects the distance to the key and if the key is too far away it won't start
😊
First 🤣🤣
😮😮😮😮
😢The world 😢😢😢😢
Very bad music
Very unprofessional installer. Tidy up your wires, man.
bad move makeing it push start that's asking for it to be stolen should stay useing key i would never buy a keyless car nnnnnnnnnoooooooooo way but it's good how it works
push buttons dont work if the key isnt nearby