Nakamichi NA3510-M7 CarPlay Android Auto Receiver First Look
HTML-код
- Опубликовано: 29 авг 2024
- Our first look at the Nakamichi NA3510-M7 one of the best entry level Apple CarPlay & Android Auto Receivers@LockdownSecurity
Buy Now: buy.lockdownse...
Remember to LIKE our video!
SUBSCRIBE to our channel: youtube.lockdo...
Follow Lockdown Security
Website: lockdownsecuri...
Facebook: / lockdown155
Instagram: / lockdown155
Lockdown Security is proudly CANADIAN!!
Phone: 1-866-824-4118 |
Email: sales@lockdownsecurity.ca
If you are in the Toronto, Ontario area, come check us out:
Lockdown Security
155 McIntosh Drive
Unit 5&6
Markham, Ontario Canada
L3R 0N6
Click: map.lockdownse...
#lockdownsecurity #carsecurity #dashcameras #driversafety #caraudio #remotestarters #dashcams #toronto #antitheft #igla #compustar #fortin #authoralarm
![[Part -1] Transform your old android phone to Android Auto Head Unit! #android #diy #techhacks](/img/1.gif)
Love my Nakamichi NAM3510-M7 Lockdown Security installed in my 2005 Toyota Corolla. They also did a great job installing a 2-channel Thinkware U1000 dash cam in the same vehicle and two 2-channel Thinkware U1000 dash cams in my new SUV for a total of 4 camera coverage (front, both sides and rear). Friendly, professional service who stands behind their installation. Thank you Jeff, Harry, Sal, Kristian, Harrison and Duane!
Did you use a Metra dual din install kit?
@@kevinshumyvr I don’t know as Lockdown Security in Markham, Ontario, Canada did the instal. You can contact them. I’ve been in their waiting room and have heard them give detailed advise over the phone to people.
HI Kei, Sorry I just checked my receipt. I should have thought of that first. Yes the installer used a Metra 95-8204 Toyota Corolla 2003-2008 Double Din Dash kit and Metra 70-1761 Toyota/Subaru Wire Harness.
I also had a usb cigarette lighter adapter installed to replace the cigarette lighter that came with the vehicle. It can only charge devices. It does not activate the wired Apple CarPlay or Android Auto on the Nakamichi Head Unit. The USB port at the lower left of the Nakamichi head unit screen is the port to use Apple CarPlay or Android Auto.
Looks like a pretty neat little unit. I'm a bit concerned that no firmware updates have been published yet, but it looks responsive enough with the current build.
Any idea if it supports any bluetooth codecs past SBC? I'd be using the USB audio feature of Android Auto anyways, but it would be nice to see some apt-X or similar for better bluetooth quality and latency.
A family member bought one of these ... I am putting it in for her. is the video bypass just ground like most android or is it like a pioneer and is the reverse signal a positive? I have not actually seen the unit I am tackling this saturday, Just doing my research and cannot find the actual detailed diagrams online. thank you
Hello. Thanks so much for your video! I would like to use Apple CarPlay wirelessly, would it be possible to buy a CarPlay adapter and plug it into the back usb, so I don’t have to always have my phone plugged in to use CarPlay? Also would this unit work on a 2012 Toyota Prius?
No adapters are available for the 2012 Prius, to add CarPlay to the OEM radio. You would need to replace the Toyota radio with an aftermarket radio with CarPlay, like the one in this video or others we sell.
Here are the parts you need to change the radio, start here: lockdownsecuritycanada.ca/collections/toyota-prius-2010-2015-radio-replacement-parts
Then, here are all the radios we sell: lockdownsecuritycanada.ca/collections/multimedia-receivers
Thank you for my response. I wanted to use CarPlay wirelessly and understand that this unit does not connect to CarPlay wirelessly. Is that correct? I was wondering if I could plug in a CarPlay adapter to the rear usb of this aftermarket radio, in order to connect to CarPlay without having to plug my phone in everytime I want to use CarPlay. I look forward to hearing from you!
i had a nakamichi installed in my 2007 nissan frontier, when i program the SWC, it works a little while then some of the control doesn’t work. i have to reprogram everytime and always losing some of the controls, sometimes i can only used the volume control on a different control button on my steering wheel. dis i miss something in programming? thanks
Potentially need to check the ground input for the SWC inputs.
Can it connect to carplay from the front usb?
Yes you can connect through the front USB port.
Hey great video. I installed one in my truck about a year ago and love it. Question l have is why doesn't the usb on the back work with my iPhone. The usb has power but my phone wont work, only the front usb works. I wanted to plug in my apple wireless CarPlay adapter but it doesn't work. Not sure why...Thanks
That's a good question, one which I believe is due to the design of the radio, where only the front USB works with CarPlay and Android Auto. They did this I believe, to be easier for USB cable plug in (unfortunately not as cosmetically nice though). Looks like you have to plug the wireless adapter into the front port (although I am not 100% the adapter will work with this radio).
Can you connect Bluetooth obd2 dongle with it? The radio do not have option for changing Bluetooth pin. I have Nam5730 9IN installed. It pairs to obd2,but fails to connect
Hi Jeff, i have same unit, problem is that I cant hear the voice of the caller. Both mobile call and messenger video call. Thank you
hi, 7.1 RCA ? like NAM1630 DSP ! thx
No, this radio only has front, rear, and sub pre-outs (six channels of pre-out)
Just brought one but having trouble loading music from TF card. no info on proper way to put files on card.
Would you please help ,how to connect the steering wheel buttons to the radio nakamichi 5210 7 "screen
How is this compared to sony xav ax200 and jvc kw m560bt?
It looks like these are being blown out, any idea why? Quality problems or just Nakamichi getting out of the market?
Pricing is very competitive at this end of the market, but these are staying current, not going anywhere.
Do you ship to the us?
Yes we ship to the USA, and worldwide as well.
Wonderful review Jeff....
Much appreciated
Do you still need to buy and add a steering wheel interface with the unit or is it built in already?
For the volume control from the steering wheel
Thank you in advance
Thanks for the great feedback on the video, the steering wheel interface is built into this radio (provded your vehicle does not have a digital CAN-BUS based steering wheel control system.
It is for a 2005 accura Tl
Thanks for the response
@@lionofjudah144-1 You can use the built in steering wheel controls with the 2005 Acura TL
Where do I plug in my subwoofer rca wires? Any. Help
To the pre-out marked SUB (subwoofer)
Does this head unit have a power antenna signal wire if so is the power antenna always up if the unit is on or only while the radio is in use
This unit has a power antenna wire, but to be honest I am not 100% if they have it shutoff power to the antenna when no on rado, which kind of defeats the purpose of having a separate power antenna wire
Hey got a question. It has Time Alignment but how do you disable it since there are no presets? If im listening by myself and then people show up, how do i disable it so then everyone hears no DSP. Thanks
You would have to go into the settings to turn it off.
hi i cannot make this unit's SWC on honda 2016 CRV. do i need to buy Axxess?
Possibly yes, as the SWC on the 2016 CRV may be CAN-BUS based which is not compatible with the built in SWC of the Nakamichi
How do I make sure that this stereo fits my car?(2009 Jetta) Thanks
It will fit your car, you will need parts such as dash kit, wire harness, antenna adapter, but we can supply these to you.
Email sales@lockdownsecurity.ca for further details.
Do u know how to turn off drive ban
So On my buddies explorer the big connection doesn’t fit in anything, do I need an adapter or do I need to cut it off?
You need a wire harness adapter or an interface, depending on the year and trim of the Explorer you are working with. The wiring from an Explorer will NOT directly plug into any aftermarket radio.
@@LockdownSecurity yeah he had an aftermarket harness that plugs in to the original harness. I had my other buddy come by and show me cause my deck didn’t have the plug at the end. Just the one that went into the deck. Didn’t wanna cut the other end off and mess it up. So for anyone reading this you need to cut the big end off of it doesn’t fit anywhere, just connect color to color for wire. And ur sub has to be connected to the one RCA that says sub or it won’t work, connect the red to it and cover black with electrical tape
@@LockdownSecurity and it was an 02 by the way
Would you please help to check the actual dimensions of the screen, I wanna buy a protector. Thanks a lot.
178×100×128MM
Get a liquid screen protector with $100 screen replacement. So that way if ur screen breaks, they send you $100 and you can put it towards fixing screen or getting new deck
Do you think it fits in a 2010 Hyundai accent?
I do think it fits the 2010 Hyundai Accent.
Is there an aux on the the front of the unit?
No the AUX input is on the back of this radio, there is a USB input on the front of the radio though
This thing resets all the settings every time i turn of the ignition, any clues as to how I fix it?
I would love to know too. I put a new amp in the stereo and it still resets
We have seen this issue, looks to be either a defective product (solution being get a new one to swap out with) OR we have also seen some with the ACC and Constant wire pinout being incorrect, requiring a swap with each other.
Do you know if there is a way to replace the original nakamichi firmware and replace it with android?
No there is no way to do this
@@gameofdrone damn
@@gameofdrone Do you know how to update the firmware?
@@XLumbar Not sure they have ever released a firmware update to be honest, and if they did it would be through the USB port using a USB key.
@@LockdownSecurity I figured out how to do it and tried to install a different version but I managed to brick the whole system.. so as a future reference to anyone, I would advise against trying to do it.
Does DSP have LPF/HPF? I like this function on my actuall JVC HeadUnit. I like to change it to get Apple CarPlay, but I will miss HPF..
Yes the is a low pass filter (LPF) and a high pass filter (HPF)
Can u pls show one with carplay feature. Tq
This one has car play, you need to connect it to the back of the receiver, so the best way is to get a flush mount adapter and cut your hole and mount, or replace with the cigarette lighter . Take the lighter spot out so it’s just a hole with no metal inside, run ur usb on the back of it to the deck, fit and mount in hole, connect your phone plug to it and your phone
ur mom, I recently purchased this unit and can only get Android Auto and Carplay to connect via the front usb port, how did you get the rear port to work?
which is better nam3305 or this nam3510m7??
NA3510-M7 is better in our opinion
Hi. Does the Nakamichi NAM3510-M7 have a 3-year warranty?
No, it comes with a 1 year warranty.
@@LockdownSecurity Thanks
Hi Jeff, would you happen to know which wire on the harness is for the reverse cam?
It will be marked BACK or reverse, I have to verify the colour but the radio has a wire colour chart on the chassis
@@LockdownSecurity thanks for that. I've installed this radio and mostly everything is good. One small issue is the head set itself keeps resetting and showing the initial setup page whenever I start the car again. Does your headset have the same issue?
@@thecityofrome did you sort this out? I'm looking at buying this head unit. Do you have a wiring hiccup? switched source vs constant?
@@nicksonsbikeski440 Yes I did. I have a Toyota 86 so it took me a while to figure out that I had to switch the constant with accessory. Just note that a few colours on the supplied harness differ and for some reason park is on the secondary unit (for Android auto functionality). Apart from that really enjoying the head unit
@@thecityofrome can you show how did you do it? been having the same problem with my unit.
do a video of NAM 5420
Hi. I need to know the factory reset password for nakamichi. Thanks
Try 1948
Got a question what is SWC1 and SWC2 for ?? Don
Steering wheel control. That’s all I know though.
Those are the steering wheel control integration wires, used when your vehicle has steering wheel controls and you wish to retain them (keep them working).
Thanks guys!! Yeah I eventually figured it out!! D