rarely do people know. the secret to strong welding on thin metal | pipe cutting tricks
HTML-код
- Опубликовано: 12 дек 2023
- rarely do people know. the secret to strong welding on thin metal | pipe cutting tricks
This video is how to weld metal thin square tube using stick weld, this video is made for beginner welders, how to weld for beginners
Hopefully inspiring and hopefully useful
Don't forget to subscribe!!
#howtoweldforbeginners #welding #welder #beginnerswelder #weldingsquaretube #weldingmachine
Tag :
how to weld for beginners
how to weld for the first time
how to weld for dummies
how to weld for cheap
how to weld for beginners whistlindiesel
how to weld for beginners youtube
how to weld forged steel
how to weld for nasa
how to tig weld for beginners
how to weld arc for beginners
how to weld aluminum for beginners
how to tig weld aluminum for beginners
how to mig weld aluminum for beginners
how to weld aluminum tig settings
how to weld with a stick welder for beginners
how to forge weld in a gas forge
how to stick weld for beginners
how to arc weld for beginners
how to mig weld for beginners
how to flux weld for beginners
how to weld cast iron
how to weld copper
how to weld cast aluminum
how to weld cast iron with stick
how to weld downhill stick
how to weld downhill mig
how to weld dog cage
how to weld dual shield
how to weld different metals
how to weld disc brake mounts
how to weld door hinge
how to weld exhaust for beginners
how to weld exhaust pipe with flux core
how to weld exhaust pipe with mig
how to weld exhaust pipe with stick welder
how to weld flux core vertical
how to weld flat bar
how to weld flux 125
how to weld fuel tank
how to weld good
how to weld gold at home
how to weld gasless mig
how to weld gate hinges
how to weld gas tank
how to weld good beads
how to weld gas pipe
how to weld hinges on metal gate
harbor freight welder
how to weld horseshoes together
how to weld hdpe plastic
how to weld holes shut
how to weld hardened steel
how to weld hinges
how to weld hole
how to weld metal for beginners in tamil
how to weld metal for beginners in hindi
how to weld jewelry at home
how to weld gold jewelry
how to weld with jumper cables
how to weld permanent jewelry
how to weld aluminum jon boat
how to weld a trailer jack
how to weld kaliskis
how to weld go kart frame
how to weld a kayak
how to weld a knife
how to wield a katana
how to weld a broken key
how to weld a dog kennel
how to weld a go kart
how to weld like a pro
how to weld lead
how to weld led strip
how to weld lithium batteries
how to weld lincoln electric
how to weld loops on fly line
how to weld leaf springs
how to weld laptop hinges
how to weld metal for beginners
how to weld metal for beginners mig
how to weld metal for beginners stick
how to weld metal for beginners malayalam
how to weld metal for beginners tig
how to weld aluminum
how to weld exhaust pipe
how to weld stainless steel
how to weld cast iron
how to weld plastic
how to weld copper
how to weld with a wire feed welder
how to weld mig
how to weld a muffler
how to weld aluminum with tig
how to weld a flower
how to weld an exhaust
how to weld aluminum with a torch
how to weld a rose
how to weld aluminum with spool gun
how to weld brass
how to weld better
how to weld body panels
how to weld brass together
how to weld bronze
how to weld better with stick
how to weld beads
how to weld brass pipe
b welding
how to weld cast aluminum
how to weld catalytic converter
how to weld cast
how to weld cast steel
welding thin stainless steel
welding thin aluminum
welding things
welding thin stainless steel with stick
welding thin stainless steel with mig
welding things to sell
welding things together
welding thin metals
welding thin stainless steel tig
welding thin wall stainless steel tubing
welding thin aluminum with mig
welding thin aluminum with dc tig
welding thin aluminum tube
welding thin aluminum with a spool gun
welding thin cast aluminum
welding thin cast iron
welding thin copper
welding rod for thin metal
arc welding for thin metal
welding thin pipe
welding thin plate
tig welding thin stainless pipe
welding thin wall tubing
how to weld cast iron with mig
how to weld cast iron with stick
c o to welding
c welding
how to weld c purlin
how to weld c channel together
how to weld downhill mig
how to weld downhill
how to weld different metals
how to weld ductile iron
how to weld door hinge
how to weld door panels
how to weld exhaust
how to weld exhaust tips
how to weld exhaust manifold
e weld plasma
how to weld flux core
how to weld for the first time
how to weld fence
how to weld for dummies
beginners welder kit
beginner welder machine
beginner welder projects
beginner welder setup
best beginner welder
beginner tig welder
beginner mig welder
beginner stick welder
beginner welder
beginner welder tips
beginner arc welder
best beginner welder harbor freight
best beginner welder mig
welder machine for beginners
cheap beginner welder
welder for beginners
best beginner tig welder for aluminum
good beginner welder
beginner mig welder kit
best beginner stick welder
best beginner tig welder - Хобби
Excellent work. All complain about poor quality in manufacturing & our throw away world but at the same time don't have the appreciation & patience for "dedicated to improving their skills"craftsman
The galvanized area needs to be ground down to bare steel for the weld to have a fighting chance. Zinc contamination in the weld pocket creates porosity and therefore a poor weld.
Not so when mig or arc welding....tig different story
Not to say giving off dangerous fumes too!
Its 16ga itll be fine
That's why you always weld in a ventilated area especially when welding galvanized coated material or any other coated metal and in this case I'm referring to mig welding scenario's
❤
Угу, а если стык с отступом от верха и столбов штук сорок - неделю мудохаться. Хотя решение и исполнение красивые, сродни столярным
мне тоже понравилась вязка металла вполдерева. ) но сам я бы сделал кондуктор для сварки встык, а торец круглой трубы заглушил пятаком. и никакой "столярки"!
Столяру подарили сварочный аппарат, и он сделал вязку "вполдерева" из металла. Красивое... 😊
Если так, то сначала нужно было обварить профильные трубы, а потом их вкладывать в круглую трубу.
Bloody hell that's a lot of effort and welding galv, well done 👍
Very clever use of paper to transfer measurements and angles. Well done!
Forgot to weld the bars before installing those?
Нет смысла, сварной шов ту же нагрузку в стык держит
Yes, it's a solid design!
Mmm. Galvanized. Still waiting for helpful welding techniques. A shot of your vent fan and PPE would be cool.
PPE meh were scabs working at a non union outfit, we don't worry about safety or benefits.
Похоже сварщик еще не получал в лоб разломанный диск..
Well you made a strong joint good job on that but I'm sure you are going to totally destroy it by slapping on some splatter weld with a stick and why not remove the galvanized coat first so you and everyone around you can live longer and throw down that stick welder and do it right with a mig its thin wall not a stick job
You can do it with smaller electrodes with the proper polarity. No problem
Found the guy that sucks at stick welding 🤣
Well im assuming u dont get alot done during the day besides drawing lines
Make a temp and gang cut, also designer calls the joint.
He also do a lot of finger wagging.
Always helpful to have a straight finger.
stevenanderson6658 I'm sure he takes milk breaks too!
I would, you fucking trolls.
You rock my guy.👏👏👏✅
Very smart and very great design
That fit up though! 👌
Alot of work for little progress
Very interesting technique.
Molta feina 😅 però resultat 👌👏👏👏👏
Nicely done
. ПЕРВЫЙ Я 👍
Прекрасная работа: "железобетонное" соединение😊
Благодарю за ролик
Булатный лайк мой👍
Don't you just love critics....
Brilliant.
Видимо, это сварщик ходил в школу на геометрию, а остальные думали, что "жызь фсиму научет"
Доктора сюда не хватает...
Wow, yep makes a lot of sense ❤
Good
Отлично!
I like thanks
A little confusing, but the finished product at the end is impressive✔️
Капля сварки тонну держит. Поэтому такие изыски - лишнее.
Nice
To be honest, waste of time.
Ide yang selalu kreatif dan menginspirasi.terima kasih ilmunya👍👍
👍🔥💯
Good jop
You’re right, that would be much stronger
"Stick Welder"?
More like "SICK WELDER", AMIRITE??
Чтож вы все охуенные мастера работаете без кожухов на болгарке??? У меня монтажники без очков и кожуха хрен работать будут!!!
После 20го отпиленного пальца придет осознание.
Good we have tube lasers now. The construction is clever. Remember a collapsing support tube of an oil rig that was welded the "easy" way and buckled. For normal applications however that easy weld would do.
Класс!!!
Bro, that can’t possibly be the simplest way to get that result…
Now I’m gonna have this problem running around in my head for days…
Notch the square tubing and add a gusset under
You do realize that most commercial welding and hardware stores sell what's called a "pipe tape" or "pipe wrap" that has a measuring tape along with all the angles youd ever need to weld pipes together?
Working like that will get me fired
А если столб уже вкопан в землю и наверху не удобно будет все это вырезать и размечать
Редко кто так играется в жизни😅😅😅
Con tantas medidas q tomo, ya me dormi😂
Remove the galvanising and TIG weld it like a professional. Neater, more controllable and the integrity of the weld is more reliable.
Это 250 Мегаляхов! Даже моя покойная бабушка варила бы аккуратно!
I'd go to all that trouble & still burn 2" holes in it.
What a time consuming way..... I guess if thats how you want to build it that way but its def not cost effective.
Короче, геометрия - она такая.
The huietta.
ليش هالفلسفه الزايده خلص يحسب كم حجم الانابيب على الماسوره ويقص مافي داعي للورقه وهالهري هاض كله
こんにちは
Hard to make any money if it takes you that long to do anything
.👍🇱🇦🌍
needless , ur man 😅
Don't weld anything onto a thin metal pipe. Got it.
Don't listen women complaining about using galvy material its used widely every where! Great tips on great fab work thanks for sharing....
Мысль хорошая, каждый раз так варить лень,но если надо крепко то очень хорошо придуманно
Привари также на стенку круглой трубы, разницы в прочности не будет. Не путай сварку металла с механическим соединением в перекрышку типа кирпичной кладки или сборки из бруса/бревна с пазами.
@@palsn-dc1mz ну, в принципе согласен,если хорошо проверит то да)
Too many moves. Too complex.
Overcomplicated and unnecessary
Your method may be good, but using an angle grinder with no safety guard is NOT GOOD. If you are a tradesman, you should know better. This stupid act has removed all credibility from your video. Learn Safety so you can teach safe practices.
I see no problem with not using a shield. I never use a face shield and I still have one good eye.
Ушм без кожуха - сразу дизлайк
Bullshit
Thank you for the knowledge
I wish someone like you lived a few houses down. I’d come over and ask to play and build weapons and armor all day man.